MI 67-68 and 69-72 trim / moulding - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**DaHos** · 07-29-2013, 07:01 AM

Quote:

Originally Posted by duallyjams

I'll take the pair of rear swb bed wheel well for 67 , not sure were I'm at inline / my original post was on 18 / zip 20751

PM sent, and you have first dibs. Badazmalibu asked for quote and countered.

duallyjams · 07-29-2013, 06:01 PM

payment sent

BLACKLINE61 · 07-29-2013, 06:42 PM

looking for lower woodgrain trim for swb just the bed part, do you have any left?

**DaHos** · 07-29-2013, 08:57 PM

Quote:

Originally Posted by duallyjams

payment sent

Pmt received, give me couple days to get them packed and shipped out, thx, D'

Quote:

Originally Posted by BLACKLINE61

looking for lower woodgrain trim for swb just the bed part, do you have any left?

All SWB bed items I have are for are black, sry

Tim R · 08-01-2013, 09:12 AM

Hi Do you still have the steel grill hoops and headlight bezels for the 67? if so I am intersted in them how much shipped to to 77523

Thanks Tim

**DaHos** · 08-01-2013, 01:58 PM

Quote:

Originally Posted by Tim R

Hi Do you still have the steel grill hoops and headlight bezels for the 67? if so I am intersted in them how much shipped to to 77523

Thanks Tim

Sry,but both sets of hoops and bezels have been sold.

And to all that paid, items shipped this am......
Posted via Mobile Device

Bhelton · 08-04-2013, 09:52 AM

Received pieces yesterday, Thanks for the deal

duallyjams · 08-04-2013, 08:24 PM

Quote:

Originally Posted by Bhelton

Received pieces yesterday, Thanks for the deal

received mine as well, very well packaged.Thanks

brian1971 · 08-05-2013, 11:54 PM

Dahos received my tailgate upper trim and they look great,thanks Brian

BigRed76 · 08-05-2013, 11:55 PM

Got my pieces over the weekend. Thanks

**DaHos** · 08-16-2013, 09:25 AM

Lots of nice pieces left......ttt
Posted via Mobile Device

faribran · 08-16-2013, 12:14 PM

i am interested in side trim for 67-68 short wheel base (set for both sides). driver quality. do you have any of these left ?

**yote1234** · 08-16-2013, 04:11 PM

im looking for the peice of trim nos.on bed passenger side front lower in wood. and any trim clips in green. thx,dave

69SCSS · 08-16-2013, 09:40 PM

Do you happen to have a full set for a 68 SWB? Driver condition?

**DaHos** · 08-17-2013, 09:59 AM

Quote:

Originally Posted by faribran

i am interested in side trim for 67-68 short wheel base (set for both sides). driver quality. do you have any of these left ?

Only have the one rear wheel hoop, tail lights and ft LWB.

Quote:

Originally Posted by yote1234

im looking for the peice of trim nos.on bed passenger side front lower in wood. and any trim clips in green. thx,dave

Sry only have black for SWB

Quote:

Originally Posted by 69SCSS

Do you happen to have a full set for a 68 SWB? Driver condition?

See above

**DaHos** · 08-18-2013, 09:41 AM

FWIW if anyone is interested I will sell all items in post #86 for $400 shipped.

The are 47 pieces, 23 of them are NOS with minor shelf wear (mainly scratches in the black), the rest are nice drivers.

Also included is a 1gal ziplock bag of used clips.

Im sure I have a few more pieces laying around Ill throw in as I find them...........

WV1967LWB · 08-28-2013, 08:31 AM

If you have 1967 lwb bed side pieces, I am interested. Driver quality is fine.

johnyoung · 08-28-2013, 05:39 PM

DaHos, Put me in line for a complete set of 67-68 body side molding. I will take driver quality, dingy and a few little dents won't bother me. I'll fix and polish. Price me a set and I'll get back to you ASAP. Been looking for this for 2 months to finish my 67. John Young London, Kentucky

johnyoung · 08-28-2013, 05:46 PM

Dahos, Let me know what you have left for 67. I will take everything you listed in post 29 for 67-68 - also need the grill pieces and headlight trim if you still have this. Just holler back and let me know. ANYONE OUT THERE HAVE A COMPLETE SET OF 67-68 SIDE MOLDING - DRIVER QUALITY - FEW DINGS DON'T BOTHER ME - I CAN POP EM OUT AND POLISH THE TRIM - HELP ME GET MY 67 DONE. JOHN YOUNG - LONDON, KY

Pegman · 09-08-2013, 12:57 AM

I have a complete moulding set with a very rare moulding for the toolbox door in rt boxside for a 1972 chev most moldings are in ok condition
Posted via Mobile Device
Posted via Mobile Device

**DaHos** · 09-08-2013, 09:35 AM

Quote:

Originally Posted by WV1967LWB

If you have 1967 lwb bed side pieces, I am interested. Driver quality is fine.

All 67-68 trim has been sold

Quote:

Originally Posted by johnyoung

Dahos, Let me know what you have left for 67. I will take everything you listed in post 29 for 67-68 - also need the grill pieces and headlight trim if you still have this. Just holler back and let me know. ANYONE OUT THERE HAVE A COMPLETE SET OF 67-68 SIDE MOLDING - DRIVER QUALITY - FEW DINGS DON'T BOTHER ME - I CAN POP EM OUT AND POLISH THE TRIM - HELP ME GET MY 67 DONE. JOHN YOUNG - LONDON, KY

All 67-68 trim has been sold

Quote:

Originally Posted by Pegman

I have a complete moulding set with a very rare moulding for the toolbox door in rt boxside for a 1972 chev most moldings are in ok condition
Posted via Mobile Device
Posted via Mobile Device

That's wonderful, now go become a supporting member and then you can post your own for sale thread

Pegman · 09-14-2013, 02:30 AM

Quote:

Originally Posted by 71blksuper4x4

Any toolbox door trim? Trevor
Posted via Mobile Device

I have toolbox trim actually I have a full set of upper and lower trim from a 1972 chev custom
Posted via Mobile Device

tommys72 · 09-14-2013, 07:38 AM

Do you have either of the LWB upper pieces still? FedEx decided mine looked better bent in half than one straight piece..lol.. anyway let me know as I need one now
Posted via Mobile Device

**TBONE1964** · 09-14-2013, 09:30 AM

Quote:

Originally Posted by tommys72

Do you have either of the LWB upper pieces still? FedEx decided mine looked better bent in half than one straight piece..lol.. anyway let me know as I need one now
Posted via Mobile Device

That stinks Tom and I am sure Fed Ex was not responsible. The only good way to send long pieces of trim is to zip tie or tape them to a piece of wood, then bubble wrap and place in a tube. I know it is more weight and more work but it will have a much better chance of reaching it's destination in a usable condition. I myself would pay a little extra for shipping to get it undamaged.

tommys72 · 09-14-2013, 02:03 PM

Quote:

Originally Posted by TBONE1964

That stinks Tom and I am sure Fed Ex was not responsible. The only good way to send long pieces of trim is to zip tie or tape them to a piece of wood, then bubble wrap and place in a tube. I know it is more weight and more work but it will have a much better chance of reaching it's destination in a usable condition. I myself would pay a little extra for shipping to get it undamaged.

The packing store packed it for me, they did a good job actually, FedEx took responsibility for it and gave me the shipping money back, but thats all they gave me...oh well...need a piece of trim now though
Posted via Mobile Device

07-29-2013, 06:01 PM	#77
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: 67-68 and 69-72 trim / moulding payment sent __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

07-29-2013, 06:42 PM	#78
BLACKLINE61 Registered User Join Date: Feb 2013 Location: a****er ca Posts: 43	Re: 67-68 and 69-72 trim / moulding looking for lower woodgrain trim for swb just the bed part, do you have any left?

08-01-2013, 09:12 AM	#80
Tim R Registered User Join Date: Jan 2009 Location: bmt,tx Posts: 127	Re: 67-68 and 69-72 trim / moulding Hi Do you still have the steel grill hoops and headlight bezels for the 67? if so I am intersted in them how much shipped to to 77523 Thanks Tim

08-04-2013, 09:52 AM	#82
Bhelton Registered User Join Date: May 2012 Location: Hickory NC Posts: 2,351	Re: 67-68 and 69-72 trim / moulding Received pieces yesterday, Thanks for the deal

08-05-2013, 11:54 PM	#84
brian1971 Registered User Join Date: Sep 2012 Location: fort lauderdale,fl Posts: 1,296	Re: 67-68 and 69-72 trim / moulding Dahos received my tailgate upper trim and they look great,thanks Brian __________________ 1971 c10 custom deluxe fleetside swb LS3 w/BTR stage IV cam,4L85E w/3600 stall 67-72chevytrucks.com/vboard/showthread.php?t=558024

08-05-2013, 11:55 PM	#85
BigRed76 Registered User Join Date: Jan 2010 Location: Loveland, CO Posts: 1,921	Re: 67-68 and 69-72 trim / moulding Got my pieces over the weekend. Thanks __________________ Zach 1970 Chevrolet Custom Camper K20 1971 GMC Super K2500, 12V/NV4500 swap in progress 1971 Chevrolet Custom C10 1972 Chevrolet Custom Deluxe C20, 5.3/4L60E 1972 Oldsmobile Cutlass Supreme, 455/TH400, 3.73 posi 2004 GMC Sierra 2500HD, LB7/Allison, CCSB 2005 GMC Sierra 1500, 5.3/4L60E, CCSB

08-16-2013, 09:25 AM	#86
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,854	Re: 67-68 and 69-72 trim / moulding Lots of nice pieces left......ttt Posted via Mobile Device Attached Images __________________ 1967 C10 SWB Owner - Rustbelt Restorations

08-16-2013, 12:14 PM	#87
faribran Registered User Join Date: Jul 2005 Location: AL Posts: 1,828	Re: 67-68 and 69-72 trim / moulding i am interested in side trim for 67-68 short wheel base (set for both sides). driver quality. do you have any of these left ? __________________ "

08-16-2013, 04:11 PM	#88
yote1234 Senior Member Join Date: Feb 2003 Location: Gold Canyon Arizona Posts: 4,265	Re: 67-68 and 69-72 trim / moulding im looking for the peice of trim nos.on bed passenger side front lower in wood. and any trim clips in green. thx,dave __________________ 1971 K5 CST Blazer 1965 Chevelle Malibu 283 1968 Camaro 327 1968 Honda mini-trail z50a #377 1966 uh 1-D Huey

08-16-2013, 09:40 PM	#89
69SCSS Registered User Join Date: Aug 2012 Location: Neskowin OR Posts: 1,153	Re: 67-68 and 69-72 trim / moulding Do you happen to have a full set for a 68 SWB? Driver condition? __________________ My 68 SWB Al Silveira Music <- My daughter loves this guy 8-)

08-18-2013, 09:41 AM	#91
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,854	Re: 67-68 and 69-72 trim / moulding FWIW if anyone is interested I will sell all items in post #86 for $400 shipped. The are 47 pieces, 23 of them are NOS with minor shelf wear (mainly scratches in the black), the rest are nice drivers. Also included is a 1gal ziplock bag of used clips. Im sure I have a few more pieces laying around Ill throw in as I find them........... __________________ 1967 C10 SWB Owner - Rustbelt Restorations

08-28-2013, 08:31 AM	#92
WV1967LWB Registered User Join Date: Apr 2012 Location: Martinsburg, WV Posts: 19	Re: 67-68 and 69-72 trim / moulding If you have 1967 lwb bed side pieces, I am interested. Driver quality is fine.

08-28-2013, 05:39 PM	#93
johnyoung Registered User Join Date: May 2010 Location: London, Kentucky Posts: 88	Re: 67-68 and 69-72 trim / moulding DaHos, Put me in line for a complete set of 67-68 body side molding. I will take driver quality, dingy and a few little dents won't bother me. I'll fix and polish. Price me a set and I'll get back to you ASAP. Been looking for this for 2 months to finish my 67. John Young London, Kentucky

08-28-2013, 05:46 PM	#94
johnyoung Registered User Join Date: May 2010 Location: London, Kentucky Posts: 88	Re: 67-68 and 69-72 trim / moulding Dahos, Let me know what you have left for 67. I will take everything you listed in post 29 for 67-68 - also need the grill pieces and headlight trim if you still have this. Just holler back and let me know. ANYONE OUT THERE HAVE A COMPLETE SET OF 67-68 SIDE MOLDING - DRIVER QUALITY - FEW DINGS DON'T BOTHER ME - I CAN POP EM OUT AND POLISH THE TRIM - HELP ME GET MY 67 DONE. JOHN YOUNG - LONDON, KY

09-08-2013, 12:57 AM	#95
Pegman Registered User Join Date: Aug 2013 Location: Kelowna BC Canada Posts: 191	Re: 67-68 and 69-72 trim / moulding I have a complete moulding set with a very rare moulding for the toolbox door in rt boxside for a 1972 chev most moldings are in ok condition Posted via Mobile Device Posted via Mobile Device Attached Images



Register or Log In To remove these advertisements.

09-14-2013, 07:38 AM	#98
tommys72 Registered User Join Date: Jun 2012 Location: springfield mo Posts: 3,075	Re: 67-68 and 69-72 trim / moulding Do you have either of the LWB upper pieces still? FedEx decided mine looked better bent in half than one straight piece..lol.. anyway let me know as I need one now Posted via Mobile Device __________________ United States Marine Corps 2000-2011 Iraq and Afghanistan veteran Just living life now and enjoying it and my wife, daughter and son

Register or Log In To remove these advertisements.