TX 88 suburban part out - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Big Port Jimmy 6 · 02-15-2013, 10:41 PM

Sent.

Quote:

Originally Posted by Lone_Star

Wiper delay module sold pending funds.

Big Port Jimmy 6 - PM send regarding payment.

TheApocalyptican · 02-15-2013, 10:47 PM

Is the fan shroud available? If it is how much with shipping to 89115?

Lone_Star · 02-16-2013, 08:34 PM

thinair - I will pull the lines and figure out shipping cost and PM you the total

Apocalyptican - The fan shroud is available, need to pull it and get the shipping cost and PM you also

Big Port Jimmy - I will get the module boxed and ready to ship, PM me your shipping address

ivorton74 · 02-17-2013, 02:52 AM

how much for rear bumper with brackets shipped to 57262?

fishingjred73 · 02-17-2013, 02:24 PM

I'm looking for the platic clips, tabs, whatever there called that hold the cowl panel at the rear under the windshield.

restore-em · 02-17-2013, 07:34 PM

Hi Lone_Star, I'm still not sure I'm using the site correctly, but I'm still interested in the front seat mounts if you still have them. My zip code is 55016.
Posted via Mobile Device

Lone_Star · 02-17-2013, 08:48 PM

Quote:

Originally Posted by thinair

The fuel lines from the tbi to the frame where they connect to the hard lines to 68137.
Posted via Mobile Device

thinair;
$40 shipped on the fuel lines. These are the hard lines that connect to the throttle body with flex line down to the frame.

Lone_Star · 02-17-2013, 08:53 PM

Quote:

Originally Posted by TheApocalyptican

Is the fan shroud available? If it is how much with shipping to 89115?

The fan shroud is $20, but looking at $50 just for the shipping due to size, so a total of $70.

It is a two piece unit that is stapled together at the factory, I could separate it and maybe save some on the shipping due to reduced size. It does have some cracks at that joint already, but not enough to come apart or not be usable.

Bryan

Lone_Star · 02-17-2013, 09:15 PM

Quote:

Originally Posted by ivorton74

how much for rear bumper with brackets shipped to 57262?

The rear bumper is good driver quality, has one ding where it looks like it got backed into something right at the frame mount, the rest can be cleaned up easily.
Name: 2013-02-17 11.02.03.jpg
Views: 205
Size: 58.2 KB

Name: 2013-02-17 11.02.03.jpg
Views: 205
Size: 58.2 KB

Name: 2013-02-17 11.02.37.jpg
Views: 207
Size: 75.8 KB

Asking $75 for the bumper, brackets, license plate box and light, and bolts. Shipping is coming in at $70 based on size/weight. So $145 total.

Lone_Star · 02-17-2013, 09:16 PM

Quote:

Originally Posted by fishingjred73

I'm looking for the platic clips, tabs, whatever there called that hold the cowl panel at the rear under the windshield.

Sorry, those got trashed when I tried to remove them from the cowl.

Lone_Star · 02-17-2013, 09:38 PM

Quote:

Originally Posted by restore-em

Hi Lone_Star, I'm still not sure I'm using the site correctly, but I'm still interested in the front seat mounts if you still have them. My zip code is 55016.
Posted via Mobile Device

Yep, you got it right! I see two brackets, one that goes between the slider rail and the floor, and the one welded to the floor pan. There are 4 (two each side) of the slider mount brackets, and 2 (one each side, against the console) for the one welded to the floor. I could do $60 shipped for all 6 brackets.

Name: 2013-02-17 11.03.52.jpg
Views: 137
Size: 63.4 KB

Name: 2013-02-17 11.03.52.jpg
Views: 137
Size: 63.4 KB

fishingjred73 · 02-17-2013, 10:24 PM

Quote:

Originally Posted by Lone_Star

Sorry, those got trashed when I tried to remove them from the cowl.

OK Thanks.

restore-em · 02-17-2013, 10:44 PM

Yep, those are what I need, what method for payment do you use?
Posted via Mobile Device

Lone_Star · 02-18-2013, 09:53 AM

Quote:

Originally Posted by restore-em

Yep, those are what I need, what method for payment do you use?
Posted via Mobile Device

PM sent with payment info.

restore-em · 02-19-2013, 02:55 AM

Money has been sent, Thank You.

Lone_Star · 02-19-2013, 08:14 PM

Quote:

Originally Posted by restore-em

Money has been sent, Thank You.

restore-em; payment received, PM sent regarding slider brackets.

restore-em · 02-19-2013, 09:54 PM

Lone_Star, I think I goofed up my first message, but I didn't really need the one's attatched to the seat tracks, I just thought it would be a little easy money for you. I didn't realize they were riveted on, so don't worry about them.
Thanks, restore-em.
Posted via Mobile Device

restore-em · 02-20-2013, 04:04 PM

Lone_Star, I hope I didn't do anything wrong for you to change your mind about the seat mounts.
restore-em.
Posted via Mobile Device

Lone_Star · 02-20-2013, 04:19 PM

Quote:

Originally Posted by restore-em

Lone_Star, I hope I didn't do anything wrong for you to change your mind about the seat mounts.
restore-em.
Posted via Mobile Device

Nope, not at all. Actually made the shipping easier! I have the brackets boxed and ready to take to the post office this evening.

Lone_Star · 02-20-2013, 04:20 PM

Big Port Jimmy - I have yours ready to go to the post office also.

ivorton74 · 02-22-2013, 02:31 PM

Quote:

Originally Posted by Lone_Star

The rear bumper is good driver quality, has one ding where it looks like it got backed into something right at the frame mount, the rest can be cleaned up easily.
Attachment 1062154

Attachment 1062155

Asking $75 for the bumper, brackets, license plate box and light, and bolts. Shipping is coming in at $70 based on size/weight. So $145 total.

payment sent!

Lone_Star · 02-25-2013, 10:24 AM

OK, I hauled the left-overs to scrap on Saturday. I have left:

grille with headlight bezels and turn signals - $50 + shipping
headers, long tube - $60 + shipping
TBI engine, long block, local pickup - $200

Thanks!
Bryan

Ivorton74 - I have your bumper boxed, should be at the shipper either today or tomorrow.

ivorton74 · 02-25-2013, 02:42 PM

ok thanks...lemme kno when u ship it out. im kinda excited to get it lol

**gmc 2500 4x4** · 03-09-2013, 02:12 PM

i'll take grill from '88 if ya still have it, i dont need headlamp pieces 14063

Lone_Star · 03-09-2013, 06:13 PM

gmc 2500 - pm sent

02-15-2013, 10:47 PM	#52
TheApocalyptican Registered User Join Date: Jun 2010 Location: Las Vegas, Nv Posts: 312	Re: 88 suburban part out Is the fan shroud available? If it is how much with shipping to 89115? __________________ 1995 Suburban K2500 454.....off road & towing 1999 Astro, work van 2006 Silverado 2wd 5.3 w/4.5" lift and 33s

02-16-2013, 08:34 PM	#53
Lone_Star Registered User Join Date: Jul 2012 Location: Ft Worth, Texas Posts: 57	Re: 88 suburban part out thinair - I will pull the lines and figure out shipping cost and PM you the total Apocalyptican - The fan shroud is available, need to pull it and get the shipping cost and PM you also Big Port Jimmy - I will get the module boxed and ready to ship, PM me your shipping address

02-17-2013, 02:52 AM	#54
ivorton74 Registered User Join Date: Nov 2011 Location: South Dakota Posts: 916	Re: 88 suburban part out how much for rear bumper with brackets shipped to 57262?

02-17-2013, 02:24 PM	#55
fishingjred73 Registered User Join Date: May 2007 Location: LOUISIANA Posts: 811	Re: 88 suburban part out I'm looking for the platic clips, tabs, whatever there called that hold the cowl panel at the rear under the windshield. __________________ James '68 Stepside (ground up in progress) My 68 build thread http://louisianaclassictruckclub.fre...side-t956.html '81 SWB "Pap paw" (Driver) The 81 build thread http://louisianaclassictruckclub.fre...-swb-t960.html Member of www.louisianaclassictruckclub.com https://www.facebook.com/groups/296290610747732/

02-17-2013, 07:34 PM	#56
restore-em Registered User Join Date: Jan 2013 Location: cottage grove, Mn. Posts: 18	Re: 88 suburban part out Hi Lone_Star, I'm still not sure I'm using the site correctly, but I'm still interested in the front seat mounts if you still have them. My zip code is 55016. Posted via Mobile Device

02-17-2013, 10:44 PM	#63
restore-em Registered User Join Date: Jan 2013 Location: cottage grove, Mn. Posts: 18	Re: 88 suburban part out Yep, those are what I need, what method for payment do you use? Posted via Mobile Device

02-19-2013, 02:55 AM	#65
restore-em Registered User Join Date: Jan 2013 Location: cottage grove, Mn. Posts: 18	Re: 88 suburban part out Money has been sent, Thank You.

02-19-2013, 09:54 PM	#67
restore-em Registered User Join Date: Jan 2013 Location: cottage grove, Mn. Posts: 18	Re: 88 suburban part out Lone_Star, I think I goofed up my first message, but I didn't really need the one's attatched to the seat tracks, I just thought it would be a little easy money for you. I didn't realize they were riveted on, so don't worry about them. Thanks, restore-em. Posted via Mobile Device

02-20-2013, 04:04 PM	#68
restore-em Registered User Join Date: Jan 2013 Location: cottage grove, Mn. Posts: 18	Re: 88 suburban part out Lone_Star, I hope I didn't do anything wrong for you to change your mind about the seat mounts. restore-em. Posted via Mobile Device

02-20-2013, 04:20 PM	#70
Lone_Star Registered User Join Date: Jul 2012 Location: Ft Worth, Texas Posts: 57	Re: 88 suburban part out Big Port Jimmy - I have yours ready to go to the post office also.

02-25-2013, 10:24 AM	#72
Lone_Star Registered User Join Date: Jul 2012 Location: Ft Worth, Texas Posts: 57	Re: 88 suburban part out OK, I hauled the left-overs to scrap on Saturday. I have left: grille with headlight bezels and turn signals - $50 + shipping headers, long tube - $60 + shipping TBI engine, long block, local pickup - $200 Thanks! Bryan Ivorton74 - I have your bumper boxed, should be at the shipper either today or tomorrow.

02-25-2013, 02:42 PM	#73
ivorton74 Registered User Join Date: Nov 2011 Location: South Dakota Posts: 916	Re: 88 suburban part out ok thanks...lemme kno when u ship it out. im kinda excited to get it lol

03-09-2013, 02:12 PM	#74
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,894	Re: 88 suburban part out i'll take grill from '88 if ya still have it, i dont need headlamp pieces 14063

03-09-2013, 06:13 PM	#75
Lone_Star Registered User Join Date: Jul 2012 Location: Ft Worth, Texas Posts: 57	Re: 88 suburban part out gmc 2500 - pm sent



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.