47-55.1 1954 inner windshield trim - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**8man** · 02-07-2021, 11:32 AM

I'm looking for the clips that clip to the back side of the inner windshield trim for a 54-55 first series.

Any body have any ideas on where to get them?

greg_h · 02-07-2021, 04:31 PM

No idea where to find replacements but what they are actually are spacers to leave a gap between that moulding and the windshield for defrost air. Just mentioning this in case you can't find any and want to try to "engineer" some sort of replacements.

**8man** · 02-07-2021, 05:29 PM

Thanks Greg.

vintovka · 02-08-2021, 12:02 AM

Tough to find, The clips are actually spacers that allow defroster to reach window. When i was scouring yards i noticed the interior trim and clips were always absent. Was considering using angled blocks but found my originals squirrelled away from decades ago. Almost tossed them till i realized what they were.

**8man** · 02-08-2021, 01:53 PM

Vintovka, thanks.

Luckily I have 2, so I think I'll take the advice of others and just make them. They won't be spring steel, but they will hold it up.

02-07-2021, 11:32 AM	#1
8man Senior Member Join Date: Sep 2017 Location: Bryan, Texas Posts: 2,277	1954 inner windshield trim I'm looking for the clips that clip to the back side of the inner windshield trim for a 54-55 first series. Any body have any ideas on where to get them? __________________ 8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204

02-07-2021, 04:31 PM	#2
greg_h Registered User Join Date: Apr 2015 Location: Enid OK Posts: 85	Re: 1954 inner windshield trim No idea where to find replacements but what they are actually are spacers to leave a gap between that moulding and the windshield for defrost air. Just mentioning this in case you can't find any and want to try to "engineer" some sort of replacements.

02-07-2021, 05:29 PM	#3
8man Senior Member Join Date: Sep 2017 Location: Bryan, Texas Posts: 2,277	Re: 1954 inner windshield trim Thanks Greg. __________________ 8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204

02-08-2021, 12:02 AM	#4
vintovka Registered User Join Date: Aug 2016 Location: Hunkered Down Posts: 1,774	Re: 1954 inner windshield trim Tough to find, The clips are actually spacers that allow defroster to reach window. When i was scouring yards i noticed the interior trim and clips were always absent. Was considering using angled blocks but found my originals squirrelled away from decades ago. Almost tossed them till i realized what they were. __________________ 1954 USAF 3100 http://67-72chevytrucks.com/vboard/s...d.php?t=714917

02-08-2021, 01:53 PM	#5
8man Senior Member Join Date: Sep 2017 Location: Bryan, Texas Posts: 2,277	Re: 1954 inner windshield trim Vintovka, thanks. Luckily I have 2, so I think I'll take the advice of others and just make them. They won't be spring steel, but they will hold it up. __________________ 8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.