hacked wiring - The 1947 - Present Chevrolet & GMC Truck Message Board Network

96duck · 01-14-2012, 04:16 PM

Im trying to fix the mess of wires. In my truck! PO had butchered most of the wiring in the truck. I have replaced the main under dash wiring and im trying to fix the engine bay now. Is there a harness available from the plug in the first picture? I have a 350, HEI, internal alt. I have looked at several harnessesand not sure what one I need or if I can just wireit myself.
Posted via Mobile Device

**Clyde65** · 01-14-2012, 08:31 PM

The one that gous to the starter and etc is the engine harness, the one that goes to the horn relay and lights is the front harness
Posted via Mobile Device

**PGSigns** · 01-14-2012, 09:34 PM

The one in my truck was a huge mess. After spending hours trying to fix it I decided to replace it all. I used American Auto wire. I put the classic update in mine. They do make restoration style harnesses and may have what you need. One thing for sure the quality is very good.
Jimmy

blackdawg · 01-15-2012, 01:14 PM

I going through the same thing.I have decided to have the whole truck rewired from one end to the other.my mechanic friend says he will get everything wired up properly lights,guages,heater etc.For around 400 -600 dollars its a alot of money and wiring is not my thing.I have alot invested in the drive train and it gives piece of mind.So never cut corners on the wiring.

01-14-2012, 04:16 PM	#1
96duck Registered User Join Date: Nov 2011 Location: High Point NC Posts: 28	hacked wiring Im trying to fix the mess of wires. In my truck! PO had butchered most of the wiring in the truck. I have replaced the main under dash wiring and im trying to fix the engine bay now. Is there a harness available from the plug in the first picture? I have a 350, HEI, internal alt. I have looked at several harnessesand not sure what one I need or if I can just wireit myself. Posted via Mobile Device Attached Images

01-14-2012, 08:31 PM	#2
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,539	Re: hacked wiring The one that gous to the starter and etc is the engine harness, the one that goes to the horn relay and lights is the front harness Posted via Mobile Device __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

01-14-2012, 09:34 PM	#3
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: hacked wiring The one in my truck was a huge mess. After spending hours trying to fix it I decided to replace it all. I used American Auto wire. I put the classic update in mine. They do make restoration style harnesses and may have what you need. One thing for sure the quality is very good. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

01-15-2012, 01:14 PM	#4
blackdawg Blackdawg Join Date: Aug 2010 Location: North Delta ,British Columbia Posts: 213	Re: hacked wiring I going through the same thing.I have decided to have the whole truck rewired from one end to the other.my mechanic friend says he will get everything wired up properly lights,guages,heater etc.For around 400 -600 dollars its a alot of money and wiring is not my thing.I have alot invested in the drive train and it gives piece of mind.So never cut corners on the wiring. __________________ LIFE NEEDS NO RED LIGHTS !! 1966 chevy stepside. Aka Bella. 1998 chevy s-10 4x4 daily driver. my build thread http://67-72chevytrucks.com/vboard/s...d.php?t=467164



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.