Putting a 72 body on a 2003 Yukon frame - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**BigBird05** · 01-22-2020, 12:09 AM

The 2003 Yukon wheel base is one inch longer than my 1972 C-10 SWB. This would be a great swap for anyone that wants to run an LS engine.

MARKDTN · 01-22-2020, 02:29 PM

There was a thread on a guy in Alaska doing this with a 2001 Tahoe a few years back. He got pretty far and stopped updating. If you can find that thread it might help you. He had details on how he overcame some of the challenges.

I found it
http://67-72chevytrucks.com/vboard/s...d.php?t=688570

01-22-2020, 12:09 AM	#1
BigBird05 Senior Member Join Date: Aug 2019 Location: Cheraw Posts: 1,305	Putting a 72 body on a 2003 Yukon frame The 2003 Yukon wheel base is one inch longer than my 1972 C-10 SWB. This would be a great swap for anyone that wants to run an LS engine.

01-22-2020, 02:29 PM	#2
MARKDTN Registered User Join Date: Jan 2011 Location: Chattanooga, TN Posts: 2,131	Re: Putting a 72 body on a 2003 Yukon frame There was a thread on a guy in Alaska doing this with a 2001 Tahoe a few years back. He got pretty far and stopped updating. If you can find that thread it might help you. He had details on how he overcame some of the challenges. I found it http://67-72chevytrucks.com/vboard/s...d.php?t=688570 __________________ '83 K20-TPI '73 C10 '79 C10-ex-diesel(SOLD) '07 Tahoe(Son driving) '14 Suburban-DD '71 C10-current project Last edited by MARKDTN; 01-22-2020 at 02:35 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.