Buddy Bucket Console/Center Seat Dimensions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Portmod7 · 11-15-2012, 04:33 PM

Can any of you buddy bucket owners out there take some measurements for me?

I wanted to see if I could get the dimensions of the "box" (length, width, height) including the dimension from the bottom to the centerline of the hinge. Also, the thickness of the material it is made of.

Also the dimensions of the seat and backrest. Same thing; length, width, and height.

Thanks in advance for any help!

rpatowers · 11-15-2012, 09:25 PM

Can somebody help this fellow out??

nds1968 · 11-16-2012, 12:31 AM

I'll try to get some measurements and pics tomorrow if no one else beats me to it. Nate

Portmod7 · 11-16-2012, 10:30 AM

Thanks guys, I appreciate it!

nds1968 · 11-16-2012, 08:33 PM

Let me know if this helps, I don't know how to make the dimensions on the photos. 16 gauge .0625 thickness All measurements are from inside of bends. Inside dimension is 12 5/8" wide and 16 5/8" long. The sides and front are 3 5/8" deep and the rear is 7 3/4" deep. The return lip on the sides and front are 7/16" The front corner angles are 15/16" x 15/16" x 3 5/8" high. The rear Z support is 9/16" x 7/8" x 15/16" x 7 3/4" high.

nds1968 · 11-16-2012, 08:35 PM

Hinge width measurements. 1 7/8"--1 3/16"--5 1/4"--1 3/16"--1 7/8"

nds1968 · 11-16-2012, 08:57 PM

The outside diameter of the hinge is 3/8" The center hinge bracket bolted to the seat measures 5 1/4" wide by 4 3/16" from center of hinge with a 1 1/2" return that has the screws.

nds1968 · 11-16-2012, 09:00 PM

Hope this helps and not confuses you

If you need additional measurements let me know. Maybe if you can make the photos with a line I can give specific measurements. Nate

Portmod7 · 11-16-2012, 09:38 PM

That's AWESOME Nate, thanks a ton! Could I ask another favor, and get you to measure the seat and back pads? Then I should have everything I need.

Thanks again!
Posted via Mobile Device

**LostMy65** · 08-25-2014, 01:17 AM

Did you ever get the remaining dimensions you needed?

**leddzepp** · 08-25-2014, 01:44 AM

14 5/8" wide.

**leddzepp** · 08-25-2014, 01:49 AM

17 3/4" long.

**leddzepp** · 08-25-2014, 01:56 AM

The top cushion appears to be 14 5/8" square

**LostMy65** · 08-27-2014, 09:22 PM

Thank you

**SOON2BLAZE** · 03-26-2024, 09:54 PM

Getting ready to take a Slosh Tub buddy bucket console to the upholstery shop. Any chance anyone can post the thickness of the seat bun and armrest portions as my upholster will do the foam as well. Thanks, Chris

11-15-2012, 04:33 PM	#1
Portmod7 Registered User Join Date: Dec 2004 Location: Aztec, NM Posts: 388	Buddy Bucket Console/Center Seat Dimensions Can any of you buddy bucket owners out there take some measurements for me? I wanted to see if I could get the dimensions of the "box" (length, width, height) including the dimension from the bottom to the centerline of the hinge. Also, the thickness of the material it is made of. Also the dimensions of the seat and backrest. Same thing; length, width, and height. Thanks in advance for any help! __________________ Super Blue - 1968 C-10 Short Stepside Fastburn 385, 4-Speed Sag. on the Column, Coleman 9" Floater w/Detroit TrueTrac

11-15-2012, 09:25 PM	#2
rpatowers Registered User Join Date: Dec 2004 Location: Hayward, CA Posts: 124	Re: Buddy Bucket Console/Center Seat Dimensions Can somebody help this fellow out??

11-16-2012, 12:31 AM	#3
nds1968 Registered User Join Date: Mar 2006 Location: Pittsburgh Posts: 1,694	Re: Buddy Bucket Console/Center Seat Dimensions I'll try to get some measurements and pics tomorrow if no one else beats me to it. Nate __________________ Nate 1967 short fleet Project Blue Goose 'If it don't bounce back... heeheehee you go hungry!" Blues Brothers

11-16-2012, 10:30 AM	#4
Portmod7 Registered User Join Date: Dec 2004 Location: Aztec, NM Posts: 388	Re: Buddy Bucket Console/Center Seat Dimensions Thanks guys, I appreciate it! __________________ Super Blue - 1968 C-10 Short Stepside Fastburn 385, 4-Speed Sag. on the Column, Coleman 9" Floater w/Detroit TrueTrac

11-16-2012, 08:33 PM	#5
nds1968 Registered User Join Date: Mar 2006 Location: Pittsburgh Posts: 1,694	Re: Buddy Bucket Console/Center Seat Dimensions Let me know if this helps, I don't know how to make the dimensions on the photos. 16 gauge .0625 thickness All measurements are from inside of bends. Inside dimension is 12 5/8" wide and 16 5/8" long. The sides and front are 3 5/8" deep and the rear is 7 3/4" deep. The return lip on the sides and front are 7/16" The front corner angles are 15/16" x 15/16" x 3 5/8" high. The rear Z support is 9/16" x 7/8" x 15/16" x 7 3/4" high. Attached Images __________________ Nate 1967 short fleet Project Blue Goose 'If it don't bounce back... heeheehee you go hungry!" Blues Brothers Last edited by nds1968; 11-16-2012 at 08:44 PM.

11-16-2012, 08:35 PM	#6
nds1968 Registered User Join Date: Mar 2006 Location: Pittsburgh Posts: 1,694	Re: Buddy Bucket Console/Center Seat Dimensions Hinge width measurements. 1 7/8"--1 3/16"--5 1/4"--1 3/16"--1 7/8" Attached Images __________________ Nate 1967 short fleet Project Blue Goose 'If it don't bounce back... heeheehee you go hungry!" Blues Brothers Last edited by nds1968; 11-16-2012 at 08:49 PM.

11-16-2012, 08:57 PM	#7
nds1968 Registered User Join Date: Mar 2006 Location: Pittsburgh Posts: 1,694	Re: Buddy Bucket Console/Center Seat Dimensions The outside diameter of the hinge is 3/8" The center hinge bracket bolted to the seat measures 5 1/4" wide by 4 3/16" from center of hinge with a 1 1/2" return that has the screws. Attached Images __________________ Nate 1967 short fleet Project Blue Goose 'If it don't bounce back... heeheehee you go hungry!" Blues Brothers

11-16-2012, 09:00 PM	#8
nds1968 Registered User Join Date: Mar 2006 Location: Pittsburgh Posts: 1,694	Re: Buddy Bucket Console/Center Seat Dimensions Hope this helps and not confuses you If you need additional measurements let me know. Maybe if you can make the photos with a line I can give specific measurements. Nate __________________ Nate 1967 short fleet Project Blue Goose 'If it don't bounce back... heeheehee you go hungry!" Blues Brothers

11-16-2012, 09:38 PM	#9
Portmod7 Registered User Join Date: Dec 2004 Location: Aztec, NM Posts: 388	Re: Buddy Bucket Console/Center Seat Dimensions That's AWESOME Nate, thanks a ton! Could I ask another favor, and get you to measure the seat and back pads? Then I should have everything I need. Thanks again! Posted via Mobile Device __________________ Super Blue - 1968 C-10 Short Stepside Fastburn 385, 4-Speed Sag. on the Column, Coleman 9" Floater w/Detroit TrueTrac

08-25-2014, 01:17 AM	#10
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,468	Re: Buddy Bucket Console/Center Seat Dimensions Did you ever get the remaining dimensions you needed? __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

08-25-2014, 01:44 AM	#11
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,981	Re: Buddy Bucket Console/Center Seat Dimensions 14 5/8" wide. Attached Images __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man

08-25-2014, 01:49 AM	#12
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,981	Re: Buddy Bucket Console/Center Seat Dimensions 17 3/4" long. Attached Images __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man

08-25-2014, 01:56 AM	#13
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,981	Re: Buddy Bucket Console/Center Seat Dimensions The top cushion appears to be 14 5/8" square Attached Images __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man

08-27-2014, 09:22 PM	#14
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,468	Re: Buddy Bucket Console/Center Seat Dimensions Thank you __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

03-26-2024, 09:54 PM	#15
SOON2BLAZE Account Suspended Join Date: Aug 2005 Location: Southern UT Posts: 905	Re: Buddy Bucket Console/Center Seat Dimensions Getting ready to take a Slosh Tub buddy bucket console to the upholstery shop. Any chance anyone can post the thickness of the seat bun and armrest portions as my upholster will do the foam as well. Thanks, Chris



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.