|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
|
|
Thread Tools | Display Modes |
08-01-2022, 12:36 PM
|
#1 |
|
Senior Member
 
Join Date: Feb 2001
Location: New Madison, Ohio
Posts: 21,339
|
Turning Issue. SOLVED!! Center-link
I have a 72 5 lug disc brake set up on my 70 C10. Way back I had ECE 2 1/2" Drop Spindles installed ... I have rubbing issues where the truck has a short turn radius ... when I turn my truck it acts like it’s a 4x4 and I get that 4x4 turning hop feeling. If I go with a 2: Drip Spindle ... in theory that should raise the front end about 1/2" which is all the clearance I need. Your thoughts … No its not the wheel hitting as I have done the grinding to make clearance. Check out the pics. Thanks
PS: I have a factory 402BB if that makes a difference...
__________________
A husband can be right...or...A husband can be happy.  67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk.  1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc   JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder! Last edited by 70cst; 08-10-2022 at 10:22 AM. |
|
|
| Bookmarks |
|
|
Threaded Mode