stupid question about locking hubs...need help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

88Jimmy4x4 · 10-24-2003, 10:03 PM

Okay, Im new to the SFA suspension, I have only had IFS before so I need some help.

It may sound like a dumb question, but what all do I need to buy and change to go from my auto locking hubs to manual locking hubs?
Is it just as simple as changing this?

Mile Marker Hubs

I have a 10 bolt....anyone know what part number I need?

Thanks

**JIMs70GMC** · 10-25-2003, 08:22 AM

That's all you need. Not sure about part number.

88Jimmy4x4 · 10-25-2003, 11:29 AM

Thanks, I was hoping you would say that :p

How hard is it to swap this out?

**JIMs70GMC** · 10-25-2003, 04:32 PM

Fairly easy. Can be done in about an hour. But since you have the hub off this would be a good time to pack the bearings.

10-24-2003, 10:03 PM	#1
88Jimmy4x4 Registered User Join Date: Oct 2003 Location: houston, texas Posts: 1,974	stupid question about locking hubs...need help Okay, Im new to the SFA suspension, I have only had IFS before so I need some help. It may sound like a dumb question, but what all do I need to buy and change to go from my auto locking hubs to manual locking hubs? Is it just as simple as changing this? Mile Marker Hubs I have a 10 bolt....anyone know what part number I need? Thanks __________________ 2008 Silverado Z71 RCSB 1991 GMC Jimmy 4x4 1976 GMC Sierra C15 SWB

10-25-2003, 08:22 AM	#2
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	That's all you need. Not sure about part number. __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

10-25-2003, 11:29 AM	#3
88Jimmy4x4 Registered User Join Date: Oct 2003 Location: houston, texas Posts: 1,974	Thanks, I was hoping you would say that :p How hard is it to swap this out? __________________ 2008 Silverado Z71 RCSB 1991 GMC Jimmy 4x4 1976 GMC Sierra C15 SWB

10-25-2003, 04:32 PM	#4
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Fairly easy. Can be done in about an hour. But since you have the hub off this would be a good time to pack the bearings. __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.