C10 almost roadworthy during the day and night.

[S_Gibson]

Originally Posted by stsalvage

To help you guys out a little 1973 was the last year corvette Used the ram horn's on the 350 motor It was the first year of the HEI When ordering your spark plug wires tell them you have a 1973 corvette.If your using factory Ram Horns it will give you a longer plug wire to run them up behind the motor and put 1-3 2-4 throw the front motor mounts keeping them out of the way like the factory did it from 1960--1972.Us UD40 to losen the boots up lightly pull on them and the boots will slide off.Then you push from under your motor push them throw the small Gap if your using the factory motor mounts and brackets.I will show you pics It cleans up the top of your motor

Thanks for the info. I shall keep this in mind. As you can see in the picture the wires are a mess and someone zip tied them to the brake line and heater hose. They were laying on the exhaust manifolds.