The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 09-25-2007, 05:04 PM   #1
ChevyDude
Senior Member
 
Join Date: Jun 2003
Location: Westminster, CO
Posts: 3,071
Price quote on Sandblasting your frame???

Just wondering what all you guys are paying to get your frames sandblasted???

I dropped off my frame last week and asked how much it would be and I was told $150. Got a call to come pick it up and they say it's $350??? I tired to explain to them I was quoted $150 and had asked for a phone call to confirm it...The guy starts cussing at me on the phone that I am "F" ing" pissing him off and says "Pick up your frame at 5pm"...and hangs up on me.

I did nothing, but said "I was quoted $150". Now what????

sitting here feeling abused.

Alex
__________________
Alex


1971 Lil' Red 350 SBC 700R4

Last edited by ChevyDude; 09-25-2007 at 05:05 PM.
ChevyDude is offline   Reply With Quote
Old 09-25-2007, 05:10 PM   #2
1972CheyenneSuper
Registered User
 
1972CheyenneSuper's Avatar
 
Join Date: Feb 2006
Location: ND
Posts: 208
Re: Price quote on Sandblasting your frame???

I'm not sure what you can do at this point. I'd make sure to receive a paper copy of the next quote you get. Maybe try contacting the BBB. I wonder if it isn't a common thing among blasters, the one in my area is a dick too.

Either way, that is no way to be talking to customers. If anyone should feel stupid, it would be him. When you go to pick your frame up, try being nice with him, if that doesn't work, show him that it works both ways.

Last edited by 1972CheyenneSuper; 09-25-2007 at 05:12 PM.
1972CheyenneSuper is offline   Reply With Quote
Old 09-25-2007, 05:11 PM   #3
jorgensensc
Registered User
 
jorgensensc's Avatar
 
Join Date: Jul 2003
Location: Cypress, Tx
Posts: 4,006
Re: Price quote on Sandblasting your frame???

Tka 150.00 cash, maybe 200.00, a couple of friends to help get the frame on trailer, or back of pickup, show up at 4:30, and be ready to argue. If he refuses to give you the frame for 150, offer him 200.00, but that's it (if you really need the frame). Unfortunately he has you in a bad spot now that he actually has the frame. Hopefully your couple of "large" freinds will help persuade him. Be polite and don't get angry or blow up immediately, it won't help you. Let him know that you recieved a quote and would appreciate him sticking to it, that way you can refer future business to him. Hope this helps some. Good luck and let us know how it works out for you!
SHawn
__________________
1972 C20 Suburban- Big Blue Betty
'56 Chevy Bel Air Sedan- Frame up Restoration

-What would you attempt to achieve if you knew you could not fail?-

-I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door-

R.I.P. EAST SIDE LOW LIFE
jorgensensc is offline   Reply With Quote
Old 09-25-2007, 05:12 PM   #4
BCOWANWHEELS
Registered User
 
Join Date: Nov 2006
Location: KINGSPORT,TN.
Posts: 3,035
Re: Price quote on Sandblasting your frame???

65.00 PER HOUR dont use nothing but white sand. NO BLACK BEAUTY ITS TOO COARSE...
BOB
__________________
I BELIEVE IN JOHN 3:16
BCOWANWHEELS is offline   Reply With Quote
Old 09-25-2007, 05:24 PM   #5
70GMCer
Senior Member
 
70GMCer's Avatar
 
Join Date: Apr 2005
Location: Joppa, Maryland
Posts: 4,408
Re: Price quote on Sandblasting your frame???

What is it about sand blasters and junk yard guys.....Always seem to act like you're interrupting their coffee break.......or that they're "king" and you are the servant....

I'm not saying all of them.....but a lot......
__________________
1997 GMC Sierra Ext

1965 Mustang

Last edited by 70GMCer; 09-25-2007 at 05:24 PM.
70GMCer is offline   Reply With Quote
Old 09-25-2007, 05:26 PM   #6
ChevyDude
Senior Member
 
Join Date: Jun 2003
Location: Westminster, CO
Posts: 3,071
Re: Price quote on Sandblasting your frame???

I need the frame...yes. I am in no way going to blow up at him. I was calm on the phone and never was disrespectful....It was all him. We will see what happens.

Alex
__________________
Alex


1971 Lil' Red 350 SBC 700R4
ChevyDude is offline   Reply With Quote
Old 09-25-2007, 05:27 PM   #7
72 cheyenne pdx
Registered User
 
72 cheyenne pdx's Avatar
 
Join Date: Nov 2006
Location: Portland
Posts: 382
Re: Price quote on Sandblasting your frame???

Do you know who you talked to that gave you that quote? If you can say I was quoted/told by (insert name here) $150, then they should honor the price.

You may also want to go back on them stating that you needed a confirm price before you would authorize work on the frame.

Tell them that you are a dealer of GatorHyde and to offset the $200 difference, you are willing to give them a $200 credit to bedline anything they want. They might go for that, and you will only be out of the materials.

Good Luck
72 cheyenne pdx is offline   Reply With Quote
Old 09-25-2007, 05:29 PM   #8
djw32
Registered User
 
Join Date: May 2006
Location: So.Cal
Posts: 542
Re: Price quote on Sandblasting your frame???

That guy sounds like a d*ck. Offer him cash, first. Second, offer him your credit card. If you feel that you have been taken advantage of after the transaction, call the credit card company and dispute the charges. Good luck. I had 2 different blasters try the same thing. I will always get a quote in writing from now on.

David
djw32 is offline   Reply With Quote
Old 09-25-2007, 05:30 PM   #9
ChevyDude
Senior Member
 
Join Date: Jun 2003
Location: Westminster, CO
Posts: 3,071
Re: Price quote on Sandblasting your frame???

Yes I told him who quoted the price...he said if the price wasn't from me it is not valid. I asked him if the man was his employee that I dropped the frame off with and whom quoted me? He said yes, but the price is wrong...Its's 350.00.....he hung up on me after he told me I was F ing pissing him off.

Alex
__________________
Alex


1971 Lil' Red 350 SBC 700R4
ChevyDude is offline   Reply With Quote
Old 09-25-2007, 05:39 PM   #10
msgross
Registered User
 
msgross's Avatar
 
Join Date: Jul 2006
Location: Central PA
Posts: 12,201
Re: Price quote on Sandblasting your frame???

I was quoted $150-200 for a bare frame and paid another $225 for axles, springs, rad support, crossmembers etc...

Good luck...
__________________
The Garage:
1968 K-10 SWB - "Project Money Pit"
1996 Z-71 - "huntin rig"
1969 C-10 LWB (SOLD) "Project flip that truck or else"
1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie"


My Garage Build "The 1,000 footer"
msgross is offline   Reply With Quote
Old 09-25-2007, 08:43 PM   #11
jlaird
Senior Member
 
jlaird's Avatar
 
Join Date: May 2004
Location: johnstown, NY
Posts: 2,393
Re: Price quote on Sandblasting your frame???

I absolutely hate when I get a quote and end up paying 50% more. It happened to me once and I was pissed! I understand a quote is just that, an estimate. An approximate 10% difference is acceptable, but anything more without first notifying the customer is BS!
jlaird is offline   Reply With Quote
Old 09-25-2007, 08:50 PM   #12
EyeH8the24
Registered User
 
EyeH8the24's Avatar
 
Join Date: Dec 2004
Location: beulah,alabama
Posts: 1,075
Re: Price quote on Sandblasting your frame???

i paid 150 for sand blasting a lwb frame and all suspension plus a thick coat of primer....hate to hear you are being jerked around
EyeH8the24 is offline   Reply With Quote
Old 09-25-2007, 08:53 PM   #13
sick69
Registered User
 
sick69's Avatar
 
Join Date: Sep 2006
Location: colorado springs colorado
Posts: 737
Re: Price quote on Sandblasting your frame???

Well how did it go? What did you end up paying? Whats the name of the business?


Questions man we have questions!!!!!!!!lol

Frank
__________________
70 chevy lwb c10
454/th400 and a 9" rearend
suicide doors, marker light fuel fill, 4" cowl , mini tub
sick69 is offline   Reply With Quote
Old 09-25-2007, 10:14 PM   #14
jhow66
Registered User
 
jhow66's Avatar
 
Join Date: Jun 2002
Location: Knoxville Tenn.
Posts: 3,058
Re: Price quote on Sandblasting your frame???

Paid $125 for the one on my son's Blazer.
__________________
56 Chevy Bel-Air 2dr. HT (purchased new)
71 Chevy Cheyenne SWB PU (502HO)
65 GMC short bed step--work in progress and my gofer
jhow66 is offline   Reply With Quote
Old 09-25-2007, 10:35 PM   #15
tclaremont
Registered User
 
Join Date: Aug 2007
Location: Rochester, NY USA
Posts: 70
Re: Price quote on Sandblasting your frame???

Remember, people get treated the way they ALLOW themselves to be treated.
tclaremont is offline   Reply With Quote
Old 09-25-2007, 10:49 PM   #16
57sailplane
Senior Member
 
57sailplane's Avatar
 
Join Date: Mar 2004
Location: Nebraska
Posts: 583
Re: Price quote on Sandblasting your frame???

hi,

a local company that builds agriculture equipment has a machine called a willabrator. it uses metal shot to blast large pieces. the pieces are hung on a convaor hook and then ran through the meachine. they did my frame and suspension parts for 25 dollars.
57sailplane is offline   Reply With Quote
Old 09-25-2007, 11:37 PM   #17
LockDoc
The Older Generation


 
LockDoc's Avatar
 
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,332
Re: Price quote on Sandblasting your frame???

-
My bare frame was $65. I left it with the blaster and came back in an hour and a half and picked it up.... He did a nice job on it too.

LockDoc
__________________
Leon

Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles

(My Dually Pickup Project Thread)

http://67-72chevytrucks.com/vboard/s...d.php?t=829820

-
LockDoc is offline   Reply With Quote
Old 09-25-2007, 11:59 PM   #18
68GMCCustom
Truck and auto performance nut
 
68GMCCustom's Avatar
 
Join Date: Feb 2007
Location: McKinney,Texas
Posts: 3,848
Re: Price quote on Sandblasting your frame???

There's NO WAY I would pay 233% (or whatever it comes out to) of the price I was quoted. I would tell him to have your frame ready and in the best of condition he can make it for the price quoted, or if he insists on charging you that amount that in addition to a trailer (or how ever you were going to pick it up) that you'll come visit him with a police officer in tow (or meet you there). He may figure he has you by the balls since he has your frame and you have to pay him to get it back...but he's wrong in thinking he can get away with that type of quoting.
Tell him if he's set on getting that price to take the difference out of the employee's check. If the employee is mis-quoting then are they still employed there?
__________________
Kurt -

'68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy
'72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close
'06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD
'18 Kia Sorento - wife's econo-driver
'95 Chevy S10 - reg cab shortbed, LS, 4.3, auto...

my '68's powertrain and chassis build -links broken
A surprise phase - carb to efi -links broken
68GMCCustom is offline   Reply With Quote
Old 09-26-2007, 12:16 AM   #19
wheels67
Registered User
 
wheels67's Avatar
 
Join Date: Dec 2006
Location: southern Utah
Posts: 103
Re: Price quote on Sandblasting your frame???

68 gmc custom is right. As a business owner myself, this is a matter between the employee and the owner. The customer is NOT responsible for this misquote.

Go to him and state that youre going to hold youre ground on the quote and if theirs a problem youll get the police involved. All these guys agree that the market value for this service is 150-200 dollars or so.

Do make sure to call the BBB and file a complaint of his yelling and cursing you...
wheels67 is offline   Reply With Quote
Old 09-26-2007, 12:33 AM   #20
67 cst swb
Senior Member
 
67 cst swb's Avatar
 
Join Date: Nov 2001
Location: Rapid City, SD
Posts: 2,281
Re: Price quote on Sandblasting your frame???

I paid $125.00 for shortbox frame and a few odd small pieces.
Sorry to hear your having a time with this guy.
Curious how it all turns out.
__________________
My Trucks:
1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project
1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver
1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck
1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck
2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White
2002 Chevrolet 1500HD 4x4 Crew Cab 6.0L 4L80E Red
67 cst swb is offline   Reply With Quote
Old 09-26-2007, 08:43 AM   #21
72BlckButy
Tot Roddin'
 
72BlckButy's Avatar
 
Join Date: Apr 2005
Location: Mid-MO
Posts: 24,461
Re: Price quote on Sandblasting your frame???

Quote:
Originally Posted by 72 cheyenne pdx View Post
Do you know who you talked to that gave you that quote? If you can say I was quoted/told by (insert name here) $150, then they should honor the price.

You may also want to go back on them stating that you needed a confirm price before you would authorize work on the frame.

Tell them that you are a dealer of GatorHyde and to offset the $200 difference, you are willing to give them a $200 credit to bedline anything they want. They might go for that, and you will only be out of the materials.

Good Luck
Any updates? Were you able to pick it up for $150?
__________________
-Nate

1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6)
1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior)
2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)
72BlckButy is offline   Reply With Quote
Old 09-26-2007, 09:07 AM   #22
72 longhorn BB
Registered User
 
72 longhorn BB's Avatar
 
Join Date: Jan 2000
Location: Michigan
Posts: 312
Re: Price quote on Sandblasting your frame???

Remember - the person who loses their temper in an arguement first is the one at a tactical disadvantage.

Staying calm and focusing on the facts will keep you with the upper hand, although you are in a tough spot without a written quote.

Still, if an employee gave a price quote, then that employee represented the business to you, and the matter needs to be settled between them first.

I'd recommend that you get that guy to tell his boss in front of you what he said, then if he lies to save face, you can call him on that.

You might end up writing it off to an expensive lesson.

I know most of us can tell a good story about a similar situation - they are all just one of lifes painful lessons that need to be learned, so that the NEXT time when the stakes are higher, you do follow the procedure of getting a proper written quote.

IMHO

I just want to rule out any other possible justification for him charging more, So two more questions:

Did he ONLY do the frame and NO other parts? Was there any other work required by him before he got started (disassembly/prep that you did not do)?
__________________
Chuck

1972 C-20 Longhorn
402 BB .030" over (409?), curved HEI,
RV cam, quadrajet, dual 3" exhaust, TH 400 ported w/shift kit

1999 K1500 Suburban (old style)
5.7L Vortec
4L60E

"No matter where you go, ........ there you are"

Last edited by 72 longhorn BB; 09-26-2007 at 09:18 AM. Reason: added question to clarify
72 longhorn BB is offline   Reply With Quote
Old 09-26-2007, 09:36 AM   #23
gotchevys?
Registered User
 
gotchevys?'s Avatar
 
Join Date: Dec 2006
Location: Virginia
Posts: 118
Re: Price quote on Sandblasting your frame???

They quoted you $150 and are now trying to get over double that, plus being an A$$ on top of that. I'd take a couple buddies to help you load it and $150 cash. Show up and tell him here is his $150 and you are taking the frame. If he doens't like it he can call the cops. More than likely the cops will tell him to take the $150 and you take the frame and that if he feels the need he will have to take you to court. He more than likely won't bother and if he does I'm sure the judge won't award him the money if his employee quoted you the price. He should train his emplyees better. DON'T let him screw you!
__________________
www.fatdaddieshotrods.com
gotchevys? is offline   Reply With Quote
Old 09-26-2007, 09:57 AM   #24
outlawc
Registered User
 
Join Date: Oct 2006
Location: Louisiana
Posts: 211
Re: Price quote on Sandblasting your frame???

You were quoted a price by an employee representing that company. Any discrepancies are between him and his boss, not to be passed on to you. It is the owners responsibility to make sure jobs are being quoted correctly and if not it is his responsibility to make sure you know the actual cost prior to any work being done and then to honor the quote given. The boss and employee dropped the ball and that is not your problem and should not be passed onto you.

More than likely you will have to get the police involved as you already know you are dealing with a shady operation.
outlawc is offline   Reply With Quote
Old 09-26-2007, 10:06 AM   #25
ChevyDude
Senior Member
 
Join Date: Jun 2003
Location: Westminster, CO
Posts: 3,071
Re: Price quote on Sandblasting your frame???

Ok guys....sorry for the delay in reporting. I got to his shop at 4:45...door was locked generic note on the door telling customers to go to a different location about a mile away. So we drive over there and I ask to talk to Wayne, the owner. he comes out and I say "Hi, I'm Alex with GatorHyde". Silence...he says nothing so I say "Wayne, As a customer I have never been spoken to so rudely in my life, and then you hang up on me". So he goes into his speach about he is very direct and that when it's time to go it's time to go. Whatever! I bought a witness to the 150 dollar quote with me, because Wayne tried to tell me the quote was 150 dollars and hour. Mike (my friend) who helped me drop it off say's "Nope I was right there and your employee quoted 150.00". In the end the guy tells me my frame isn't done as his compressors that cost 15,000 dollars broke down and that my frame will be done tomorrow. So I brought the conversation back to "Why don't we meet in the middle, $250.00" He went into a song and dance about he's lossing money and doesn't want "my kinda job" (frames)...and that he will have 5 hours in it...blah blah blah....and says "the least he can give it to me is $275.00 to 300.00. You know he is going to charge $300. So it went from 150.00 quoted to $300.00, an increase of a 100% which is deplorable and aweful business practice. Guys, in my younger days I would have pulled him over the counter, beat his ass, and ended up in jail and court. I'm am past that point in my life. I will pay the ass the $300.00 and report him to the BBB, and do everything I can in the Denver community to make others aware of the way this guy conducts business.....once I get my frame back.

Alex
__________________
Alex


1971 Lil' Red 350 SBC 700R4
ChevyDude is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:08 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com