The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current Classic GM Trucks Classifieds > The 1967-1972 Chevrolet & GMC Pickups Parts Board

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 07-31-2007, 10:54 PM   #1
ChevyFan24
Junior Member
 
Join Date: Nov 2006
Location: Indiana
Posts: 181
1972 Chevy SWB Fleetside For Sale in pieces

I purchased this truck in November of 2006. I have it torn down in my garage. We are going to build another house and I do not have the time to complete this project.

1972 Chevy C-10, SWB, Fleetside bed, factory a/c & tilt cab.
The truck was not an original SWB. Frame is a 1968 SWB.

The frame, control arms, trailing arms, spindles, coil springs, rear end housing, crossmembers, bumper brackets, hood hinges, hood latch support, and other misc. items have been blasted and powder coated black.
(50% gloss level)

The frame is mostly assembled. It has a ECE 4/6 drop kit, ECE stainless rear gas tank, stainless brake lines, ECE front sway bar kit, ECE Hidden Hitch, ECE Moog front end kit, New trailing arm bushings, and new rear bumper brackets.

The rear end has been professionally set up with an Eaton Posi unit, 4:11 gears from Randy's Ring & Pinion and all new seals and bearings. I have the posi traction additive and redline oil for it.

I have 2001 5.3 and a 4L60E trans with approx. 80k on it. I have the ECE engine mounts for the LS engines. The motor has been installed and all holes drilled for the mounts and the frame notched for the A/C before it was powdercoated. I also had the drive shaft professionally cut to size and the correct shaft for the 4L60E installed and a new rear U-joint.

The cab has been media/glass blasted and coated with Duponts Epoxy primer. The floor is currently cut out but a new one piece floor from Goodmark is sitting beside it . The one with the mounts. I also have both er rockers, Rt & Lt drip rails, both cab corners, and front and rear pillar patch panels.

The new sheetmetal I have is for a 1968. I have Rt & Lt doors and fenders. I have a new radiator support. They are all from Goodmark and still in the boxes. I also have a stainless/black body bolt kit from GMC Pauls. The cab bolt and mount kit. The bed mount kit.

I have a 1968 grill and hood that are very usable. New chrome bumpers and a new tailgate with the Chevrolet logo in it.

The bed floor is in good shape and it not wavy. I got it from a board member in Georgia. The sides and front panel should be replaced in my opinion.

I have over $10,000 in parts, $1000 in outsourced labor, plus the truck that I can account for. That does not include any of my labor. I have receipts for most of it but I am not sure if I have all of the receipts. I have gone back and for as to sell or not but I thought I would list it on here to see if I have any interest. I really do not want to part it out. It would make someone a good project. I am sure that I have forgot some things but I will post if I think of something else.

I am asking $9500.00 OBO.

Please let me know if anyone has any questions. You can email me at bajadan24@aol or PM. I will try to post pictures but I can take any requested pcitures and email them also. Thanks.
Attached Images
    
ChevyFan24 is offline   Reply With Quote
 

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:25 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com