20" Truck Rally Wheels - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

STOCKISH · 12-07-2011, 09:24 PM

I have a source for 20" trim rings very affordable. We are talking about the diamond cutting as mentioned before instead though. If the aluminum ones look close enough this will be the way we probably go. Waiting on response from one more mfg for steel too. I just need to know the market will be there for them in aluminum instead of steel.
Posted via Mobile Device

whiteheadcycle · 12-07-2011, 09:55 PM

If they look rite, I would still be in for a set.
Posted via Mobile Device

packsand · 12-07-2011, 11:39 PM

My 2 cent's...steel dark grey...and offset to bring right to the inside edge of fenders..

74baggedbug · 12-07-2011, 11:41 PM

I'm still interested aluminum or steel .. Link where to send my deposit
Posted via Mobile Device

packsand · 12-07-2011, 11:48 PM

LETS PUT THE FIRST SET ON MY NEW 70....http://67-72chevytrucks.com/vboard/a...1&d=1323316082

gringoloco · 12-08-2011, 01:00 AM

Quote:

Originally Posted by packsand

LETS PUT THE FIRST SET ON MY NEW 70....

Ok...

gringoloco · 12-08-2011, 01:01 AM

Ece

gringoloco · 12-08-2011, 01:02 AM

Pb

VA72C10 · 12-08-2011, 01:05 AM

Nice!!!

whiteheadcycle · 12-08-2011, 01:07 AM

Love the pb pic. That's where ill be...so let's go aluminium and get them done already!!! Please and thank you
Posted via Mobile Device

slick copper · 12-08-2011, 06:44 AM

Very nice! Love the pics. Nice to get an idea of them on an actual truck. Put me on the list!! Just don't tell my wife!

steemin_ehman · 12-08-2011, 09:28 AM

I like the aluminum idea, I'd still go with stock center caps. Easier for them to manufacture, and easier for us to get the right look!

The biggest problem with cast aluminum is back spacing options. There would be minimal options unless you go with a two piece wheel.
Posted via Mobile Device

gringoloco · 12-08-2011, 02:24 PM

Cast centers and off-the-shelf hoops?
Posted via Mobile Device

LEX · 12-08-2011, 03:25 PM

I'm in for a steel set in 5 lug.

packsand · 12-08-2011, 05:38 PM

Quote:

Originally Posted by gringoloco

ok...

nice......

STOCKISH · 12-08-2011, 10:24 PM

Still working it fellas. They said they could probably make the wheel in aluminum as an exact replica so we can still use the caps and rings. Not sure if that'd work well with an aluminum wheel though. Having a confrence call with a Mfg. Monday about steel too! We'll see I guess.

muthstryker · 12-08-2011, 10:43 PM

Why wouldnt it work if it was aluminum? As long as it looked the same, and had the removable trim ring and center cap im sure it would be fine. The reason I originally said steel because I figured that would of been the cheaper route. But if you cant get them in steel I think the aluminum would be a good substitute.

sleepertruck72 · 12-10-2011, 01:48 AM

Quote:

Originally Posted by gringoloco

Ece

I hope all this works out for you 5 luggers..

**LEEVON** · 12-10-2011, 05:39 AM

Woohoo! I'm with the rest of the crowd who always thought "wouldn't it be cool to have 20" rallys" but never did anything about it. Well when it happens, I'll be in line!

muthstryker · 12-26-2011, 08:25 PM

Updates?

Delmo · 12-26-2011, 10:41 PM

Very cool, I love the look. And great cad work, man that looks awesome. I know there is a lot involved with getting wheels passed for federal regulations to sell to the public. Maybe ask around and get some info on this before putting out to much doe for R and D. A friend of mine designed some Milk truck wheels and had a bunch of proto types made. He spent over 10 grand getting them tested and such to meet regutaions. I'm sure you've thought of this already just thoght I'd mention it.
Would love to see you succeed with these babies.

sitos · 01-16-2012, 09:07 PM

update?????

Chrislidgett · 01-16-2012, 09:11 PM

I would interested if we can do a 6 lug and the option of a 10 inch wide wheel
Posted via Mobile Device

packsand · 01-16-2012, 11:23 PM

I just got this...These a american racing new wheel's for 2012...they do a full polished also....http://67-72chevytrucks.com/vboard/a...1&d=1326770561

**Hart_Rod** · 01-16-2012, 11:33 PM

Quote:

Originally Posted by packsand

I just got this...These a american racing new wheel's for 2012...they do a full polished also....http://67-72chevytrucks.com/vboard/a...1&d=1326770561

What is the price?
Posted via Mobile Device

12-07-2011, 09:24 PM	#151
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: 20" Truck Rally Wheels I have a source for 20" trim rings very affordable. We are talking about the diamond cutting as mentioned before instead though. If the aluminum ones look close enough this will be the way we probably go. Waiting on response from one more mfg for steel too. I just need to know the market will be there for them in aluminum instead of steel. Posted via Mobile Device __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

12-07-2011, 09:55 PM	#152
whiteheadcycle Registered User Join Date: Oct 2009 Location: san jose ca Posts: 108	Re: 20" Truck Rally Wheels If they look rite, I would still be in for a set. Posted via Mobile Device

12-07-2011, 11:39 PM	#153
packsand Registered User Join Date: Mar 2011 Location: Boise Id Posts: 80	Re: 20" Truck Rally Wheels My 2 cent's...steel dark grey...and offset to bring right to the inside edge of fenders..

12-07-2011, 11:41 PM	#154
74baggedbug Registered User Join Date: Oct 2011 Location: Houston tx Posts: 699	Re: 20" Truck Rally Wheels I'm still interested aluminum or steel .. Link where to send my deposit Posted via Mobile Device

12-07-2011, 11:48 PM	#155
packsand Registered User Join Date: Mar 2011 Location: Boise Id Posts: 80	Re: 20" Truck Rally Wheels LETS PUT THE FIRST SET ON MY NEW 70....http://67-72chevytrucks.com/vboard/a...1&d=1323316082 Attached Images

12-08-2011, 01:01 AM	#157
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: 20" Truck Rally Wheels Ece Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

12-08-2011, 01:02 AM	#158
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: 20" Truck Rally Wheels Pb Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

12-08-2011, 01:05 AM	#159
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: 20" Truck Rally Wheels Nice!!! __________________ Looking for a 67-72 swb or blazer project in or around VA.

12-08-2011, 01:07 AM	#160
whiteheadcycle Registered User Join Date: Oct 2009 Location: san jose ca Posts: 108	Re: 20" Truck Rally Wheels Love the pb pic. That's where ill be...so let's go aluminium and get them done already!!! Please and thank you Posted via Mobile Device

12-08-2011, 06:44 AM	#161
slick copper Registered User Join Date: Aug 2010 Location: Richmond, KY Posts: 1,137	Re: 20" Truck Rally Wheels Very nice! Love the pics. Nice to get an idea of them on an actual truck. Put me on the list!! Just don't tell my wife! __________________ Raymond 1967 Chevy C/10 LWB Custom Optioned "big window truck" AKA Copper. My build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=452594 The story of how I got the truck:http://67-72chevytrucks.com/vboard/s...d.php?t=450939 Ole Smokey Build Thread 2002 Silverado 8.1L Crew Cab SOLDhttp://67-72chevytrucks.com/vboard/s...d.php?t=618402

12-08-2011, 09:28 AM	#162
steemin_ehman False Lies Join Date: Feb 2006 Location: Esterhazy, SK Posts: 305	Re: 20" Truck Rally Wheels I like the aluminum idea, I'd still go with stock center caps. Easier for them to manufacture, and easier for us to get the right look! The biggest problem with cast aluminum is back spacing options. There would be minimal options unless you go with a two piece wheel. Posted via Mobile Device __________________ Kyle (Steemin) Ehman -1979 Chevy CCLB, 6.7L Cummins swap - Project "RAMERADO" -2015 Yukon XL Denali (Family ride) -1977 Chevy stepside, carb'ed vortec 350 (SOLD) -Father of three daughters who will also have something cool...

12-08-2011, 02:24 PM	#163
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: 20" Truck Rally Wheels Cast centers and off-the-shelf hoops? Posted via Mobile Device __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

12-08-2011, 03:25 PM	#164
LEX Registered User Join Date: Oct 2011 Location: Houston, Texas Posts: 884	Re: 20" Truck Rally Wheels I'm in for a steel set in 5 lug.

12-08-2011, 10:24 PM	#166
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: 20" Truck Rally Wheels Still working it fellas. They said they could probably make the wheel in aluminum as an exact replica so we can still use the caps and rings. Not sure if that'd work well with an aluminum wheel though. Having a confrence call with a Mfg. Monday about steel too! We'll see I guess. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

12-08-2011, 10:43 PM	#167
muthstryker Registered User Join Date: Dec 2009 Location: Snohomish, Washington Posts: 1,187	Re: 20" Truck Rally Wheels Why wouldnt it work if it was aluminum? As long as it looked the same, and had the removable trim ring and center cap im sure it would be fine. The reason I originally said steel because I figured that would of been the cheaper route. But if you cant get them in steel I think the aluminum would be a good substitute. __________________ Matt



Register or Log In To remove these advertisements.

12-10-2011, 05:39 AM	#169
LEEVON Registered User Join Date: Jul 2006 Location: Ozark, MO Posts: 4,887	Re: 20" Truck Rally Wheels Woohoo! I'm with the rest of the crowd who always thought "wouldn't it be cool to have 20" rallys" but never did anything about it. Well when it happens, I'll be in line! __________________ '20 Silverado Trail Boss ~ '17 Tahoe ~ '79 K15 Sierra Grande ~ '76 Blazer 2wd ~ '71 Cheyenne swb ~ '55 Pontiac Safari ~'50 3100 bagged ~ '80 Wife ~ Late model kids

12-26-2011, 08:25 PM	#170
muthstryker Registered User Join Date: Dec 2009 Location: Snohomish, Washington Posts: 1,187	Re: 20" Truck Rally Wheels Updates? __________________ Matt

12-26-2011, 10:41 PM	#171
Delmo Registered User Join Date: Feb 2003 Location: Burbank CA Posts: 1,226	Re: 20" Truck Rally Wheels Very cool, I love the look. And great cad work, man that looks awesome. I know there is a lot involved with getting wheels passed for federal regulations to sell to the public. Maybe ask around and get some info on this before putting out to much doe for R and D. A friend of mine designed some Milk truck wheels and had a bunch of proto types made. He spent over 10 grand getting them tested and such to meet regutaions. I'm sure you've thought of this already just thoght I'd mention it. Would love to see you succeed with these babies.

01-16-2012, 09:07 PM	#172
sitos Registered User Join Date: May 2011 Location: hacienda heights,ca Posts: 16	Re: 20" Truck Rally Wheels update?????

01-16-2012, 09:11 PM	#173
Chrislidgett Registered User Join Date: Jan 2012 Location: Omaha Nebraska Posts: 38	Re: 20" Truck Rally Wheels I would interested if we can do a 6 lug and the option of a 10 inch wide wheel Posted via Mobile Device __________________ 1970 c10 2wd th400 and a stock 350...BBC soon to follow ~ Mild Built 454 Sitting in my Garage 2011 Silverado Crew Cab 6.2L Fast Motorsports Performance Tune 20 inch KMCs Nitto Terra Grapplers BDS Leveling Kit

01-16-2012, 11:23 PM	#174
packsand Registered User Join Date: Mar 2011 Location: Boise Id Posts: 80	Re: 20" Truck Rally Wheels I just got this...These a american racing new wheel's for 2012...they do a full polished also....http://67-72chevytrucks.com/vboard/a...1&d=1326770561 Attached Images

Register or Log In To remove these advertisements.