OR Parting out 72 GMC K20 4x4 350-TH350 - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DjS71 · 01-29-2014, 09:04 AM

Sent you a PM regarding the column.

teeitup · 01-29-2014, 09:04 AM

Tom, do you have a throttle cable for a 4x4? Needing one for the blazer. Thanks Randy

**Sandtrap9072** · 01-29-2014, 10:56 AM

Pm sent about painting gmc letters.

**tll74** · 01-30-2014, 03:49 AM

Quote:

Originally Posted by JimH2828

Tom, any 205 rubber mounts left? These or others you have.
Jim, Yes I have more. Theses in the thread are sold.
Thanks
Jim

Quote:

Originally Posted by blackbolt

You have yourself a nice stash!!!!!!! wish you were closer.

Me too!

Quote:

Originally Posted by DjS71

Sent you a PM regarding the column.

PM returned

Quote:

Originally Posted by teeitup

Tom, do you have a throttle cable for a 4x4? Needing one for the blazer. Thanks Randy

Randy, yea I got a couple trucks that have them still. 15.00

Quote:

Originally Posted by Sandtrap9072

Pm sent about painting gmc letters.

PM returned

**Sandtrap9072** · 01-30-2014, 09:06 AM

Payment sent.

Vintage Windmills · 01-30-2014, 03:03 PM

tom, do you have any good ac outer fiberglass shells? i just need the shell. Have a couple here but they got overzealus pulling engines at some point. Price shipped to 55020. thanks, Jud

diver · 01-30-2014, 04:44 PM

throttle cable from dash knob out to carb. for 67 4x4 327 thanks

**Cali72K20** · 01-30-2014, 05:30 PM

Hello,
I pm'd about parking brake cable kit and I was wondering if you have the bed spare tire mount too?
Thank you,

casey

**tll74** · 01-30-2014, 09:33 PM

Sandtrap9072Thanks! I'll paint the letters over the weekend.

Vintage Windmills Jud, I only have one off and it is complete. It is very nice, nice color, no damage and even has a 4x4 mount for the vac reservoir. I kinda think to part with it I would need 200.00 plus shipping. I've had it stashed in case I need it for a build. I have more on trucks but I don't pull them till it is parted and not sure how nice they are. If 200.00 works I'll get a shipping cost. Probably 30.00ish

diver, Sorry, no manual throttles right now.

Cali72K20 casey, Dam I knew I was forgetting something. I do have the e-brake set up just like the one in this thread 45.00 plus 15.00 shipping. I checked for you and just forgot to PM you back. I may have the carrier. I thought I seen one laying loose the other day. I'll look.

Thanks Guys, Tom

Vintage Windmills · 01-31-2014, 01:03 AM

Thanks Tom, going to have to pass as it doesn't need to be that nice or for a 4x4.

Jud

**Cali72K20** · 01-31-2014, 03:56 PM

Thank You!!!

**DeadheadNM** · 01-31-2014, 06:18 PM

Parts arrived and look great. Always appreciate your help Tom. Thank you!! You're a huge asset to the community here.

If you happen across a K20 Suburban that's clean keep me in mind. Unsubscribing from the thread. Best, Pete

**karphan** · 01-31-2014, 08:23 PM

I got the rag joint today. Very nice. Thank You, Dan

JimH2828 · 02-01-2014, 01:26 AM

Tom, here's the latest. Let me know about #7. I think since the 4x4 engine sits back further the TH350 fill tube is longer, than 4x2s. Except the shroud, please post some pics that show condition.

1) 4x4 fan shroud $85
2) NP205 bottom rubber mount set $27.50
3) NP205 side mount kit $45
4) 2x radio mount cups and nuts $5 each - $10
5) Drive leaf spring rear safety stop bracket and hardware $5
6) Coiled covered oil pressure line for $5
7) 4x4 turbo hyrda-matic 350 dip stick and fill tube (34" long) $25

I wonder how much it would cost to ship that NP205 to GA 300o5? I'm tempted.

Thanks
Jim

**tll74** · 02-02-2014, 02:32 AM

Cali72K20, I looked and can't seem to find the spare carrier.

Jim, I'll get some pics and a shipping cost on tcase Monday.

Thanks, Tom

freakshow108 · 02-02-2014, 11:25 AM

My deal on a local fan shroud fell through. Ifvyounstill have the shroud I will take it. PM me your pay pal info and I will get it taken care of, thanks.

I just noticed the last post, if I'm too late, just put me in line. Thanks.

**tll74** · 02-02-2014, 12:57 PM

Quote:

Originally Posted by freakshow108

My deal on a local fan shroud fell through. Ifvyounstill have the shroud I will take it. PM me your pay pal info and I will get it taken care of, thanks.

I just noticed the last post, if I'm too late, just put me in line. Thanks.

I have another one equally as nice so your covered. If you need pics just say so and I'll post some. Thanks, Tom

freakshow108 · 02-02-2014, 01:10 PM

Pics would be appreciated, not that I don't trust you! I will send funds your way upon viewing pics. You do pay pal, correct?

**tll74** · 02-02-2014, 01:27 PM

Paypal is fine with no fees. Pics will have to wait till Monday as I won't be near it till then.

freakshow108 · 02-02-2014, 01:38 PM

I will send payment now, I trust you. No worries on pic.

Just PM me your pay pal info, thanks.

54blackhornet · 02-02-2014, 04:03 PM

Tom, I need the small U Bolt plates, used to locate the rear end on to the leaf springs. The U portion of the bolt goes over them...? 97827 in Oregon

**tll74** · 02-02-2014, 04:30 PM

freakshow108, Thanks! You'll like it.

54blackhornet, Sure no problem. 8.00 shipped. Where abouts are you in the best side of the state?

freakshow108 · 02-02-2014, 07:10 PM

Money is sent, thanks

**tll74** · 02-02-2014, 09:00 PM

Quote:

Originally Posted by freakshow108

money is sent, thanks

thanks!

**tll74** · 02-05-2014, 03:28 AM

GMC pic for Sandtrap9072

01-29-2014, 09:04 AM	#76
DjS71 Registered User Join Date: Feb 2009 Location: Santa Rosa, CA Posts: 267	Re: Parting out 72 GMC K20 4x4 350-TH350 Sent you a PM regarding the column. __________________ 1971 C10 Short/Fleet 307-2BBL/3OTT 1999 Silverado 2500 ECSB 6.0/4L80

01-29-2014, 09:04 AM	#77
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting out 72 GMC K20 4x4 350-TH350 Tom, do you have a throttle cable for a 4x4? Needing one for the blazer. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-29-2014, 10:56 AM	#78
Sandtrap9072 Senior Member Join Date: Apr 2012 Location: Michigan Posts: 388	Re: Parting out 72 GMC K20 4x4 350-TH350 Pm sent about painting gmc letters.

01-30-2014, 09:06 AM	#80
Sandtrap9072 Senior Member Join Date: Apr 2012 Location: Michigan Posts: 388	Re: Parting out 72 GMC K20 4x4 350-TH350 Payment sent.

01-30-2014, 03:03 PM	#81
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Parting out 72 GMC K20 4x4 350-TH350 tom, do you have any good ac outer fiberglass shells? i just need the shell. Have a couple here but they got overzealus pulling engines at some point. Price shipped to 55020. thanks, Jud __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

01-30-2014, 04:44 PM	#82
diver Registered User Join Date: Nov 2013 Location: hiram,georgia Posts: 243	Re: Parting out 72 GMC K20 4x4 350-TH350 throttle cable from dash knob out to carb. for 67 4x4 327 thanks

01-30-2014, 05:30 PM	#83
Cali72K20 Senior Member Join Date: Aug 2013 Location: Northern Santa Barbara County, California Posts: 2,671	Re: Parting out 72 GMC K20 4x4 350-TH350 Hello, I pm'd about parking brake cable kit and I was wondering if you have the bed spare tire mount too? Thank you, casey

01-30-2014, 09:33 PM	#84
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: Parting out 72 GMC K20 4x4 350-TH350 Sandtrap9072Thanks! I'll paint the letters over the weekend. Vintage Windmills Jud, I only have one off and it is complete. It is very nice, nice color, no damage and even has a 4x4 mount for the vac reservoir. I kinda think to part with it I would need 200.00 plus shipping. I've had it stashed in case I need it for a build. I have more on trucks but I don't pull them till it is parted and not sure how nice they are. If 200.00 works I'll get a shipping cost. Probably 30.00ish diver, Sorry, no manual throttles right now. Cali72K20 casey, Dam I knew I was forgetting something. I do have the e-brake set up just like the one in this thread 45.00 plus 15.00 shipping. I checked for you and just forgot to PM you back. I may have the carrier. I thought I seen one laying loose the other day. I'll look. Thanks Guys, Tom __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

01-31-2014, 01:03 AM	#85
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Parting out 72 GMC K20 4x4 350-TH350 Thanks Tom, going to have to pass as it doesn't need to be that nice or for a 4x4. Jud __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

01-31-2014, 03:56 PM	#86
Cali72K20 Senior Member Join Date: Aug 2013 Location: Northern Santa Barbara County, California Posts: 2,671	Re: Parting out 72 GMC K20 4x4 350-TH350 Thank You!!!

01-31-2014, 06:18 PM	#87
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,285	Re: Parting out 72 GMC K20 4x4 350-TH350 Parts arrived and look great. Always appreciate your help Tom. Thank you!! You're a huge asset to the community here. If you happen across a K20 Suburban that's clean keep me in mind. Unsubscribing from the thread. Best, Pete __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

01-31-2014, 08:23 PM	#88
karphan Senior Member Join Date: Nov 2010 Location: Sparks, NV Posts: 258	Re: Parting out 72 GMC K20 4x4 350-TH350 I got the rag joint today. Very nice. Thank You, Dan

02-01-2014, 01:26 AM	#89
JimH2828 Registered User Join Date: Oct 2012 Location: Cumming GA Posts: 613	Re: Parting out 72 GMC K20 4x4 350-TH350 Tom, here's the latest. Let me know about #7. I think since the 4x4 engine sits back further the TH350 fill tube is longer, than 4x2s. Except the shroud, please post some pics that show condition. 1) 4x4 fan shroud $85 2) NP205 bottom rubber mount set $27.50 3) NP205 side mount kit $45 4) 2x radio mount cups and nuts $5 each - $10 5) Drive leaf spring rear safety stop bracket and hardware $5 6) Coiled covered oil pressure line for $5 7) 4x4 turbo hyrda-matic 350 dip stick and fill tube (34" long) $25 I wonder how much it would cost to ship that NP205 to GA 300o5? I'm tempted. Thanks Jim

02-02-2014, 02:32 AM	#90
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: Parting out 72 GMC K20 4x4 350-TH350 Cali72K20, I looked and can't seem to find the spare carrier. Jim, I'll get some pics and a shipping cost on tcase Monday. Thanks, Tom __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

02-02-2014, 11:25 AM	#91
freakshow108 Registered User Join Date: May 2010 Location: Eatonville WA Posts: 296	Re: Parting out 72 GMC K20 4x4 350-TH350 My deal on a local fan shroud fell through. Ifvyounstill have the shroud I will take it. PM me your pay pal info and I will get it taken care of, thanks.I just noticed the last post, if I'm too late, just put me in line. Thanks. Last edited by freakshow108; 02-02-2014 at 11:36 AM.



Register or Log In To remove these advertisements.

02-02-2014, 01:10 PM	#93
freakshow108 Registered User Join Date: May 2010 Location: Eatonville WA Posts: 296	Re: Parting out 72 GMC K20 4x4 350-TH350 Pics would be appreciated, not that I don't trust you! I will send funds your way upon viewing pics. You do pay pal, correct?

02-02-2014, 01:27 PM	#94
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: Parting out 72 GMC K20 4x4 350-TH350 Paypal is fine with no fees. Pics will have to wait till Monday as I won't be near it till then. __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

02-02-2014, 01:38 PM	#95
freakshow108 Registered User Join Date: May 2010 Location: Eatonville WA Posts: 296	Re: Parting out 72 GMC K20 4x4 350-TH350 I will send payment now, I trust you. No worries on pic. Just PM me your pay pal info, thanks.

02-02-2014, 04:03 PM	#96
54blackhornet Registered User Join Date: Jul 2008 Location: Eastern Oregon Posts: 2,258	Re: Parting out 72 GMC K20 4x4 350-TH350 Tom, I need the small U Bolt plates, used to locate the rear end on to the leaf springs. The U portion of the bolt goes over them...? 97827 in Oregon __________________ 71 C-20 07 Magnum RT AWD

02-02-2014, 04:30 PM	#97
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: Parting out 72 GMC K20 4x4 350-TH350 freakshow108, Thanks! You'll like it. 54blackhornet, Sure no problem. 8.00 shipped. Where abouts are you in the best side of the state? __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

02-02-2014, 07:10 PM	#98
freakshow108 Registered User Join Date: May 2010 Location: Eatonville WA Posts: 296	Re: Parting out 72 GMC K20 4x4 350-TH350 Money is sent, thanks

02-05-2014, 03:28 AM	#100
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: Parting out 72 GMC K20 4x4 350-TH350 GMC pic for Sandtrap9072 Attached Images __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

Register or Log In To remove these advertisements.