The 60-66 "PAYING IT FORWARD" thread! - Page 22 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

loosenutz · 09-24-2019, 01:05 AM

They are all 15". The chrome ones are wider. The painted one looks like a stock wheel but I'm not sure if it is.

Quote:

Originally Posted by oem4me

I assume 15" on the bottom one?

loosenutz · 10-01-2019, 02:58 PM

These wheels are no longer available.

Quote:

Originally Posted by loosenutz

I have 3 6 lug wheels with tires (hold air but otherwise poor shape) that were on my truck when I bought it. Would be good for rolling a project truck around or whatever. Free to pickup but not worth the cost of shipping.

52 gimmy · 10-31-2019, 10:47 AM

I have the front and rear painted steel bumpers off my 65 stepside. They are in great shape if any one can use them and are close enough to Myrtle Beach South Carolina to pick them up.

roll_the_dice · 10-31-2019, 11:09 AM

Quote:

Originally Posted by 52 gimmy

I have the front and rear painted steel bumpers off my 65 stepside. They are in great shape if any one can use them and are close enough to Myrtle Beach South Carolina to pick them up.

I'll take them...Sending you a PM...

52 gimmy · 10-31-2019, 11:33 AM

Bumpers have been spoken for by roll the dice.

roll_the_dice · 11-03-2019, 10:58 AM

Quote:

Originally Posted by 52 gimmy

Bumpers have been spoken for by roll the dice.

Great meeting you yesterday Mike! Beautiful truck. Thanks again for the bumpers...and definitely a small world!!!

52 gimmy · 11-03-2019, 01:55 PM

So nice to meet both of you as well. I hope those bumpers will help your project and getting your truck finished. I'll send you a couple of picks I have of Tommy at the track when I get chance to get them out.

Pirate83 · 11-18-2019, 12:51 PM

Quote:

Originally Posted by COCONUTS

Good Afternoon

I have a pair of 1962-66 parking light bezels and a pair of 1963-66 parking light lens that are both OEM. Bezels should polish up great and lens are intact, but are original. Lens have some crazing, but it won’t cost anymore to include them in the box. Bags shown are what I bought to replace them with. OEM were much better materials that what I installed.

USPS Priority Regional A box is probably the cheapest (maybe $8) and they won’t get damaged.

LMK,

Greg

Is there any of these still available? Looking for both.
Thanks!
Kyle

J Williams · 01-13-2020, 10:58 PM

Quote:

Originally Posted by 63C20

I have a great condition ash tray for a 62

available for pickup in olympia washington

Do you happen to still have the ash tray?

***Liz*** · 01-29-2020, 12:24 PM

This thread has been added to the 60-66 FAQ post and unstuck. The FAQ index is there so that you can find these type of threads at anytime. Please use the report a post feature if you have a FAQ worthy thread you would like added.
Thanks

SCOTI · 01-30-2020, 11:48 AM

http://67-72chevytrucks.com/vboard/s...d.php?t=800113

forestb · 02-03-2020, 05:04 PM

subscribe

**chev-obsession** · 03-21-2020, 12:44 AM

Yanked the motor And trans in my 69 for an ls engine. Guy that bought motor didn’t want the trans which is an sm465, and no luck selling it. Has a like new clutch. Trans went through all the gears good, didn’t pop out of any gears when driving, but when shifting into 3rd it didn’t seem to go in as far as other gears. Anyway, it’s all free. Pm for More details.

goatless · 03-21-2020, 12:59 AM

Free Barden Bumper.

Mountain View, CA. For pickup, only.

oem4me · 03-21-2020, 01:42 AM

Quote:

Originally Posted by goatless

Free Barden Bumper.

Mountain View, CA. For pickup, only.

Nice! I'd be all over that If I were closer.

joesscamaro · 03-25-2020, 08:35 PM

Quote:

Originally Posted by goatless

Free Barden Bumper.

Mountain View, CA. For pickup, only.

Is the head included? If not...I’m out. Haha, sorry...had to do it.

goatless · 03-25-2020, 08:36 PM

Quote:

Originally Posted by joesscamaro

Is the head included? If not...I’m out. Haha, sorry...had to do it.

Have to admit the presentation wasn't exactly the best

**LostMy65** · 03-25-2020, 10:17 PM

Quote:

Originally Posted by goatless

Free Barden Bumper.

Mountain View, CA. For pickup, only.

Please don't get rid of this.
The tag on it is from my home town.
Would you ship it for $200?

goatless · 03-26-2020, 01:23 PM

Quote:

Originally Posted by LostMy65

Please don't get rid of this.
The tag on it is from my home town.
Would you ship it for $200?

If it means that much to you I don't mind holding it, until these virus times pass, and we figure out some way of getting it to you.

**LostMy65** · 03-26-2020, 01:54 PM

Quote:

Originally Posted by goatless

If it means that much to you I don't mind holding it, until these virus times pass, and we figure out some way of getting it to you.

Yes, but please don't hold it for me. Just don't take it to the scrap yard. I'll see what I can arrange.
I do believe it deserves a home.
They are getting harder and harder to find.

roll_the_dice · 04-30-2020, 05:44 PM

Brake Booster and master cylinder... Worked fine when I took it off 2 years ago...replaced with new. If someone can use it, great! Could be cleaned up easily.

Local pickup in Savannah, GA or you pay shipping. It is heavy though so it may not be worth the cost of shipping...I would guess in the $30+ range depending where you live.

PM me or post here if you want it. Thanks

THIS WAS CLAIMED and SHIPPED. Thanks!

goatless · 05-02-2020, 01:51 PM

Quote:

Originally Posted by LostMy65

Yes, but please don't hold it for me. Just don't take it to the scrap yard. I'll see what I can arrange.
I do believe it deserves a home.
They are getting harder and harder to find.

BTW, found a good home for the bumper. Guy's gonna use it on his truck.

**LostMy65** · 05-02-2020, 02:07 PM

Quote:

Originally Posted by goatless

BTW, found a good home for the bumper. Guy's gonna use it on his truck.

Great!

loosenutz · 07-08-2020, 08:37 PM

These items have been claimed - no longer available

**1971 GMC SHORTY** · 07-09-2020, 02:07 AM

Quote:

Originally Posted by roll_the_dice

Brake Booster and master cylinder... Worked fine when I took it off 2 years ago...replaced with new. If someone can use it, great! Could be cleaned up easily.

Local pickup in Savannah, GA or you pay shipping. It is heavy though so it may not be worth the cost of shipping...I would guess in the $30+ range depending where you live.

PM me or post here if you want it. Thanks

Still Available?

10-31-2019, 10:47 AM	#528
52 gimmy Registered User Join Date: Dec 2018 Location: Myrtle Beach South Carolina Posts: 4	Re: The 60-66 "PAYING IT FORWARD" thread! I have the front and rear painted steel bumpers off my 65 stepside. They are in great shape if any one can use them and are close enough to Myrtle Beach South Carolina to pick them up.

10-31-2019, 11:33 AM	#530
52 gimmy Registered User Join Date: Dec 2018 Location: Myrtle Beach South Carolina Posts: 4	Re: The 60-66 "PAYING IT FORWARD" thread! Bumpers have been spoken for by roll the dice.

11-03-2019, 01:55 PM	#532
52 gimmy Registered User Join Date: Dec 2018 Location: Myrtle Beach South Carolina Posts: 4	Re: The 60-66 "PAYING IT FORWARD" thread! So nice to meet both of you as well. I hope those bumpers will help your project and getting your truck finished. I'll send you a couple of picks I have of Tommy at the track when I get chance to get them out.

01-29-2020, 12:24 PM	#535
*Liz* Catchy title goes here.. Join Date: Mar 2002 Location: Rockwell, NC Posts: 39,726	Re: The 60-66 "PAYING IT FORWARD" thread! This thread has been added to the 60-66 FAQ post and unstuck. The FAQ index is there so that you can find these type of threads at anytime. Please use the report a post feature if you have a FAQ worthy thread you would like added. Thanks

01-30-2020, 11:48 AM	#536
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,907	Re: The 60-66 "PAYING IT FORWARD" thread! http://67-72chevytrucks.com/vboard/s...d.php?t=800113 __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

02-03-2020, 05:04 PM	#537
forestb Registered User Join Date: Jan 2009 Location: Burbank, CA Posts: 3,582	Re: The 60-66 "PAYING IT FORWARD" thread! subscribe

03-21-2020, 12:44 AM	#538
chev-obsession Senior Member Join Date: Jul 2008 Location: kennewick, WA Posts: 1,461	Re: The 60-66 "PAYING IT FORWARD" thread! Yanked the motor And trans in my 69 for an ls engine. Guy that bought motor didn’t want the trans which is an sm465, and no luck selling it. Has a like new clutch. Trans went through all the gears good, didn’t pop out of any gears when driving, but when shifting into 3rd it didn’t seem to go in as far as other gears. Anyway, it’s all free. Pm for More details. Attached Images __________________ 1965 c/10 swb 1969 c/10 lwb

03-21-2020, 12:59 AM	#539
goatless Registered User Join Date: Oct 2015 Location: Mountain View Posts: 121	Re: The 60-66 "PAYING IT FORWARD" thread! Free Barden Bumper. Mountain View, CA. For pickup, only. Attached Images __________________ 1964 C10 LWB->SWB, 283->454, SM420->200-4R MECHANIC: "ME"

04-30-2020, 05:44 PM	#546
roll_the_dice Registered User Join Date: Mar 2016 Location: Manlius, NY Posts: 1,698	Free brake booster & mc Brake Booster and master cylinder... Worked fine when I took it off 2 years ago...replaced with new. If someone can use it, great! Could be cleaned up easily. Local pickup in Savannah, GA or you pay shipping. It is heavy though so it may not be worth the cost of shipping...I would guess in the $30+ range depending where you live. PM me or post here if you want it. Thanks THIS WAS CLAIMED and SHIPPED. Thanks! Attached Images __________________ 1965 C10 LWB Stepside 1964 GMC 1 Ton Dually Instagram #notaratrodnotashowtruck Last edited by roll_the_dice; 07-28-2020 at 11:18 AM.

07-08-2020, 08:37 PM	#549
loosenutz Registered User Join Date: Jul 2019 Location: San Diego Posts: 73	Re: The 60-66 "PAYING IT FORWARD" thread! These items have been claimed - no longer available Attached Images __________________ 1966 C10 SWB BBW LM4 4L60E Build 1966 Pro Touring Chevy II Build Last edited by loosenutz; 07-13-2020 at 07:55 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.