parting out - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**kwmech** · 11-30-2003, 04:07 PM

Have an 86 I am parting out, towed it home the other day blown engine. Black outside and grey inside. 10 bolts front and rear 4.56 gears. Have pics but they will not attach to this website, unless somebody has ideas on how I can do it, can E-mail them upon request. I have a cross post in 4x4s. Got the picture thing figured out.

cochino12 · 12-01-2003, 02:01 PM

how is the dash pad
?

alf4444 · 12-01-2003, 02:55 PM

how much for the door panels shipped to 84116 and please send pics to awolfe@prolexys.com

**kwmech** · 12-04-2003, 03:02 AM

Dash pad is cracked above the intrument cluster and the door panels went with the sale of the doors. Front buckets and rear bench seat are damn near perfect. Center console has misc, cracks. Tilt column.

**old Rusty C10** · 12-04-2003, 05:02 PM

does it have a hood ornament complete?

**kwmech** · 12-04-2003, 11:51 PM

Quote:

Originally posted by old Rusty C10
does it have a hood ornament complete?

What do you mean?

IoWnZa · 12-07-2003, 12:10 AM

Carb'ed for FI?

/IoWnZa

**kwmech** · 12-07-2003, 01:55 AM

86=carburetor

Lots of vacuum lines.

mutant-jimbo · 12-08-2003, 12:56 AM

how much for windshield wiper motors and linkage+bolts w/ s&h?
area code 79720

Destructo · 12-12-2003, 11:35 PM

damn! I want those axles but sure aint driving to california to get them! :p Those gears would work perfect in my truck with 35's!

IoWnZa · 12-13-2003, 01:27 AM

What shape are the doors and tailgate in? Since it's cali are they perfect?

/IoWnZa

Destructo · 12-13-2003, 01:38 AM

What kind of carb is on it?

alf4444 · 12-14-2003, 10:42 PM

heres a stupid little item i need and am too lazy to go salvage at a yard. DS front body mount donut and bolt the one right at the radiator support.

mutant-jimbo · 12-18-2003, 10:31 PM

alf, you shoulda told me yoi needed one, i threw one away from the blazer when i swaped over to the 89 clip. i coulda sent w/ the fender

alf4444 · 12-19-2003, 12:41 PM

I didn't know it was missing until I started putting that fender on.

I threw away a blazer too should have kept it longer.

mutant-jimbo · 12-19-2003, 10:37 PM

poor blazer

IoWnZa · 12-20-2003, 12:21 AM

Is it a rust-free rig? I am looking for some a Driver's Side Fender, and want something in new Condition.

PM me plz.

/IoWnZa

**kwmech** · 12-20-2003, 12:58 AM

rust free and fender is straight---- where are you located?

**kwmech** · 12-20-2003, 12:59 AM

Quote:

Originally posted by Destructo
What kind of carb is on it?

The infamous q-jet ---in all its glory wrapped in lots of vac hoses

**kwmech** · 12-20-2003, 01:03 AM

Quote:

Originally posted by mutant-jimbo
how much for windshield wiper motors and linkage+bolts w/ s&h?
area code 79720

How about 30.00 plus the ride what would shipping be? about 5-10. from nor. cal to texas

IoWnZa · 12-20-2003, 01:31 AM

Ellsworth Maine. Where was the Truck from? Right there in Cali?

/IoWnZa

mutant-jimbo · 12-20-2003, 09:21 AM

Quote:

Originally posted by mutant-jimbo
how much for windshield wiper motors and linkage+bolts w/ s&h?
area code 79720

still need them

CRRoy71 · 12-20-2003, 07:27 PM

I need the male ends for the rear seat belts if you have them. It does not matter what color. See pic.

11-30-2003, 04:07 PM	#1
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,396	parting out Have an 86 I am parting out, towed it home the other day blown engine. Black outside and grey inside. 10 bolts front and rear 4.56 gears. Have pics but they will not attach to this website, unless somebody has ideas on how I can do it, can E-mail them upon request. I have a cross post in 4x4s. Got the picture thing figured out. Last edited by kwmech; 11-30-2003 at 09:25 PM.

12-01-2003, 02:01 PM	#2
cochino12 It followed me home? Join Date: Mar 2003 Location: Yup Posts: 5,751	how is the dash pad ? __________________ Adam That's why they call it a shortcut Kyle, if it was easy it would just be the way. 86 c-10 SWB 85 CCSB 90 GMC K30 Crew SRW 1985 C30 Dually

12-01-2003, 02:55 PM	#3
alf4444 Registered User Join Date: Dec 2002 Location: taylorsville, UT Posts: 778	how much for the door panels shipped to 84116 and please send pics to awolfe@prolexys.com __________________ 2011 CCSB GMC 2500HD DMAX 73 GMC 3/4 ton 4x4 96 Chevy 1500 STD Cab Shortbed Z71 Owner of WickedWolfRC.com

12-04-2003, 05:02 PM	#5
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,268	does it have a hood ornament complete? __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

12-07-2003, 12:10 AM	#7
IoWnZa Big Block Blazer Join Date: Sep 2003 Location: Ellsworth, ME. Posts: 509	Carb'ed for FI? /IoWnZa __________________ [1985 Chevrolet K5 Blazer][454BBC][TH400][NP241][Dana 44][GM 12 Bolt w/ Eaton LSD][Hedman HTC Hedders][Dual 2.5" Stainless Steel Exhaust][Hedman Turbo Muffler's][Dual Spal's 14" Electric Fan's][32x11.50R15 BF Goodrich All Terrain TA KO's on 15x8 Rallys]

12-04-2003, 03:02 AM	#4
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,396	Dash pad is cracked above the intrument cluster and the door panels went with the sale of the doors. Front buckets and rear bench seat are damn near perfect. Center console has misc, cracks. Tilt column.

12-07-2003, 01:55 AM	#8
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,396	86=carburetor Lots of vacuum lines.

12-08-2003, 12:56 AM	#9
mutant-jimbo Registered User Join Date: Nov 2003 Location: Joplin, Mo. Posts: 166	how much for windshield wiper motors and linkage+bolts w/ s&h? area code 79720 __________________ "Texas is an outrage when your husband is dead, Texas is an outrage when they pick up his head, Texas is the reason why the presidents dead"-bullet by The Misfits

12-12-2003, 11:35 PM	#10
Destructo Registered User Join Date: Sep 2003 Location: Lewisville, NC Posts: 1,836	damn! I want those axles but sure aint driving to california to get them! :p Those gears would work perfect in my truck with 35's!

12-13-2003, 01:27 AM	#11
IoWnZa Big Block Blazer Join Date: Sep 2003 Location: Ellsworth, ME. Posts: 509	What shape are the doors and tailgate in? Since it's cali are they perfect? /IoWnZa __________________ [1985 Chevrolet K5 Blazer][454BBC][TH400][NP241][Dana 44][GM 12 Bolt w/ Eaton LSD][Hedman HTC Hedders][Dual 2.5" Stainless Steel Exhaust][Hedman Turbo Muffler's][Dual Spal's 14" Electric Fan's][32x11.50R15 BF Goodrich All Terrain TA KO's on 15x8 Rallys]

12-13-2003, 01:38 AM	#12
Destructo Registered User Join Date: Sep 2003 Location: Lewisville, NC Posts: 1,836	What kind of carb is on it?

12-14-2003, 10:42 PM	#13
alf4444 Registered User Join Date: Dec 2002 Location: taylorsville, UT Posts: 778	heres a stupid little item i need and am too lazy to go salvage at a yard. DS front body mount donut and bolt the one right at the radiator support. __________________ 2011 CCSB GMC 2500HD DMAX 73 GMC 3/4 ton 4x4 96 Chevy 1500 STD Cab Shortbed Z71 Owner of WickedWolfRC.com

12-18-2003, 10:31 PM	#14
mutant-jimbo Registered User Join Date: Nov 2003 Location: Joplin, Mo. Posts: 166	alf, you shoulda told me yoi needed one, i threw one away from the blazer when i swaped over to the 89 clip. i coulda sent w/ the fender __________________ "Texas is an outrage when your husband is dead, Texas is an outrage when they pick up his head, Texas is the reason why the presidents dead"-bullet by The Misfits

12-19-2003, 12:41 PM	#15
alf4444 Registered User Join Date: Dec 2002 Location: taylorsville, UT Posts: 778	I didn't know it was missing until I started putting that fender on. I threw away a blazer too should have kept it longer. __________________ 2011 CCSB GMC 2500HD DMAX 73 GMC 3/4 ton 4x4 96 Chevy 1500 STD Cab Shortbed Z71 Owner of WickedWolfRC.com

12-19-2003, 10:37 PM	#16
mutant-jimbo Registered User Join Date: Nov 2003 Location: Joplin, Mo. Posts: 166	poor blazer __________________ "Texas is an outrage when your husband is dead, Texas is an outrage when they pick up his head, Texas is the reason why the presidents dead"-bullet by The Misfits



Register or Log In To remove these advertisements.

12-20-2003, 12:21 AM	#17
IoWnZa Big Block Blazer Join Date: Sep 2003 Location: Ellsworth, ME. Posts: 509	Is it a rust-free rig? I am looking for some a Driver's Side Fender, and want something in new Condition. PM me plz. /IoWnZa __________________ [1985 Chevrolet K5 Blazer][454BBC][TH400][NP241][Dana 44][GM 12 Bolt w/ Eaton LSD][Hedman HTC Hedders][Dual 2.5" Stainless Steel Exhaust][Hedman Turbo Muffler's][Dual Spal's 14" Electric Fan's][32x11.50R15 BF Goodrich All Terrain TA KO's on 15x8 Rallys]

12-20-2003, 12:58 AM	#18
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,396	rust free and fender is straight---- where are you located?

12-20-2003, 01:31 AM	#21
IoWnZa Big Block Blazer Join Date: Sep 2003 Location: Ellsworth, ME. Posts: 509	Ellsworth Maine. Where was the Truck from? Right there in Cali? /IoWnZa __________________ [1985 Chevrolet K5 Blazer][454BBC][TH400][NP241][Dana 44][GM 12 Bolt w/ Eaton LSD][Hedman HTC Hedders][Dual 2.5" Stainless Steel Exhaust][Hedman Turbo Muffler's][Dual Spal's 14" Electric Fan's][32x11.50R15 BF Goodrich All Terrain TA KO's on 15x8 Rallys]

12-20-2003, 07:27 PM	#23
CRRoy71 Registered User Join Date: Feb 2003 Location: Mont Belvieu, TX Posts: 852	I need the male ends for the rear seat belts if you have them. It does not matter what color. See pic. Attached Images __________________ Chris '92 ext. cab s/b 4.3L "Sparky" '04 crew cab 2500 4x4 6.0L

Register or Log In To remove these advertisements.