KS parting a 72 blazer 4x4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 09-04-2010, 07:01 PM

I'll be parting it out as soon as possible. Bought this thing with only a few pics and drove 4 hour round trip was supposed to have factory tach, factory bucket seats, and factory posi, but just my luck NONE of the above ANYWAY
I'll sell the rolling chassis with body, tranny, transfer, drive lines (no top) with title or I will part it out if any interest
individual parts, $350 SOLD
single wall top a few cracks but not real bad, hatch is junk $200
front outer bumper brackets $35 plus shipping
console, couple extra holes on front-$40 plus ship-SOLD
ps pump, pulley and brackets $40 plus ship-SOLD
all motor pullies $36 shipped
ALT brackets $31 shipped
PS box $25 plus ship-sale pending
door caps-$31 shipped-SOLD
inner grill is nice $60 NO SHIP-SOLD
steering column $40 plus ship-SOLD
rear seat $60 no ship-SOLD
See anything else ask and I'll price. I'm hopefully going to start parting this Sun and Mon if the wife lets me. Thanks Randy

teeitup · 09-04-2010, 07:02 PM

822222

teeitup · 09-04-2010, 07:04 PM

877777777

teeitup · 09-04-2010, 07:04 PM

92222222

teeitup · 09-04-2010, 07:05 PM

97777777

red71cheyenne · 09-04-2010, 07:06 PM

Any door caps Randy? I need a passenger side, but would take both.

teeitup · 09-04-2010, 07:06 PM

0100000001

teeitup · 09-04-2010, 07:07 PM

66666666666666

**too much stuff** · 09-04-2010, 07:10 PM

How much for the tachometer, and any good blazer emblems? Eric

**too much stuff** · 09-04-2010, 07:14 PM

I should ask about the 4 speed shifter for bruce. That is chrome, correct? And what is the condition of the trans case knob? Thanks.

teeitup · 09-04-2010, 07:34 PM

red71cheyenne, I'll check them out Sun
Toomuchstuff, Eric, I'll check those out Sun
Thanks Randy

hgs_notes · 09-04-2010, 07:44 PM

How much for the gas tank and coil shipped to 56085? Also, are the rear ends of the frame horns in good shape? I need from the rear cross member back if possible. I'm also looking for a 72 GMC pass fender and both inner fenders.

72Levi · 09-04-2010, 10:48 PM

How much for console and roll bar Randy? Thank you.
Posted via Mobile Device

badpeanut · 09-04-2010, 11:06 PM

Is the transfer case shift lever chrome and in good shape? How much? I don't need the knob too much stuff is interested in.

matthew79 · 09-04-2010, 11:14 PM

I'll take the Chrome strips that run on top of the rails between the body and hatch.
Posted via Mobile Device

**88JRFAN** · 09-04-2010, 11:17 PM

How much for the intake? Is the motor any good? Thanks, Daren

VA72C10 · 09-05-2010, 01:29 AM

passenger front seatbelt there? Will rear seatbelts come with the brackets they bolt to? (seat bracket) Willing to sell the hatch parts/latch/guts brackets on top separately including bolts/screws?

VA72C10 · 09-05-2010, 01:32 AM

how much for rear bumper brackets

How much for seat brackets (under the aftermarket buckets)?

Thanks!

*sharpie1972* · 09-05-2010, 04:00 AM

Hey Randy, looks like something I'd drag home! Last one I got that had "factory" buckets, had seats out of a 66 GTO. Dang the luck! I could use the rear top to body straps with the catches for the hatch if noboby else needs them. Thanks, Sharpie

**k5blazin** · 09-05-2010, 07:26 AM

i am interested in the chrome shifter if it gets to me! also if it is for a sm465. thanks.

**k5blazin** · 09-05-2010, 07:29 AM

is the wire whip for the dome lights in the top still there?

tjsblazer · 09-05-2010, 09:18 AM

Interested in:
1)Brake / Clutch pedal setup including all clutch linkages and springs , from pedal to throwout including engine ball, Zbar, frame mount, etc.
2)Rr bumper splash sheilds, I actually only need one side but I can't remember which till I can look again Mon
3)tranny hump - (4spd 4x4)

This is for a frame off, so all parts would need to be good potentials for restoration. No rush, just let me know when you get a chance. Thanks, Jeff.
Posted via Mobile Device

teeitup · 09-05-2010, 09:28 AM

guys I'll try to get the stuff you all are asking about off today if possible and get you some better pics. if I don't get them off I'll atleast get you all some prices
Thanks Randy

**71blksuper4x4** · 09-05-2010, 10:13 AM

Randy, I would be interested in the roll bar and console as well. What do the tires and wheels look like as well? Thanks Trevor

teeitup · 09-05-2010, 10:25 AM

Trevor, I have one guy ahead of you on console and roll bar but I don't know about shipping roll bar.
The 35 inch tires have good tread, but have weather cracks inside tread but hold air no problem, the wheels are supposed to be 10 inch wheels, they are not scarred up. I priced the tires and wheels to a guy here in town for $300, I don't think he has any money though. Thanks Randy

09-04-2010, 07:01 PM	#1
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	parting a 72 blazer 4x4 I'll be parting it out as soon as possible. Bought this thing with only a few pics and drove 4 hour round trip was supposed to have factory tach, factory bucket seats, and factory posi, but just my luck NONE of the above ANYWAY I'll sell the rolling chassis with body, tranny, transfer, drive lines (no top) with title or I will part it out if any interest individual parts, $350 SOLD single wall top a few cracks but not real bad, hatch is junk $200 front outer bumper brackets $35 plus shipping console, couple extra holes on front-$40 plus ship-SOLD ps pump, pulley and brackets $40 plus ship-SOLD all motor pullies $36 shipped ALT brackets $31 shipped PS box $25 plus ship-sale pending door caps-$31 shipped-SOLD inner grill is nice $60 NO SHIP-SOLD steering column $40 plus ship-SOLD rear seat $60 no ship-SOLD See anything else ask and I'll price. I'm hopefully going to start parting this Sun and Mon if the wife lets me. Thanks Randy Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 10-08-2010 at 03:00 PM.

09-04-2010, 07:02 PM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 72 blazer 4x4 822222 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-04-2010, 07:04 PM	#3
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 72 blazer 4x4 877777777 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-04-2010, 07:04 PM	#4
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 72 blazer 4x4 92222222 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-04-2010, 07:05 PM	#5
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 72 blazer 4x4 97777777 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-04-2010, 07:06 PM	#6
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Re: parting a 72 blazer 4x4 Any door caps Randy? I need a passenger side, but would take both. __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty

09-04-2010, 07:06 PM	#7
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 72 blazer 4x4 0100000001 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-04-2010, 07:07 PM	#8
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 72 blazer 4x4 66666666666666 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-04-2010, 07:10 PM	#9
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,703	Re: parting a 72 blazer 4x4 How much for the tachometer, and any good blazer emblems? Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

09-04-2010, 07:14 PM	#10
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,703	Re: parting a 72 blazer 4x4 I should ask about the 4 speed shifter for bruce. That is chrome, correct? And what is the condition of the trans case knob? Thanks. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

09-04-2010, 07:34 PM	#11
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 72 blazer 4x4 red71cheyenne, I'll check them out Sun Toomuchstuff, Eric, I'll check those out Sun Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-04-2010, 07:44 PM	#12
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,107	Re: parting a 72 blazer 4x4 How much for the gas tank and coil shipped to 56085? Also, are the rear ends of the frame horns in good shape? I need from the rear cross member back if possible. I'm also looking for a 72 GMC pass fender and both inner fenders. __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff Last edited by hgs_notes; 09-04-2010 at 07:45 PM.

09-04-2010, 10:48 PM	#13
72Levi Active Member Join Date: Feb 2006 Location: sa tx Posts: 851	Re: parting a 72 blazer 4x4 How much for console and roll bar Randy? Thank you. Posted via Mobile Device __________________ 1972 K5 Blazer ALL ORIGINAL paint & engine, A/C, Tilt, 4sp, AM/FM, Tow Hooks, Aux Battery Tray, Tach, Vacuum 2004 FORD FX4 SuperCrew 2005 CTS-V 12 sec family car 2008 Buick Enclave AWD, Nav, & DVD, Wife LOVES it!

09-04-2010, 11:06 PM	#14
badpeanut Not a bad nut after all.. Join Date: Dec 2000 Location: ND Posts: 1,755	Re: parting a 72 blazer 4x4 Is the transfer case shift lever chrome and in good shape? How much? I don't need the knob too much stuff is interested in. __________________ '05 Chevy 2500HD 4x4 '72 GMC LWB 4x2 driver '72 Chevy LWB 4x4 plow truck '71 Blazer 4x4 driver '70 GMC LWB trailer

09-04-2010, 11:14 PM	#15
matthew79 Registered User Join Date: Jun 2010 Location: Surprise, AZ Posts: 381	Re: parting a 72 blazer 4x4 I'll take the Chrome strips that run on top of the rails between the body and hatch. Posted via Mobile Device



Register or Log In To remove these advertisements.

09-04-2010, 11:17 PM	#16
88JRFAN LET'S GO RACIN' Join Date: Oct 2007 Location: SALINA,KS Posts: 1,212	Re: parting a 72 blazer 4x4 How much for the intake? Is the motor any good? Thanks, Daren __________________ Daren 04 Chevy Extend cab 2500HD 6.0 Liter 4x4 71 CHEVY 3/4 4X4 402 BB, th400/np205, dana44/eaton ho52 w/4:10-TOY Rip El Jay RIP BOBBO'S MOM

09-05-2010, 01:29 AM	#17
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: parting a 72 blazer 4x4 passenger front seatbelt there? Will rear seatbelts come with the brackets they bolt to? (seat bracket) Willing to sell the hatch parts/latch/guts brackets on top separately including bolts/screws? __________________ Looking for a 67-72 swb or blazer project in or around VA.

09-05-2010, 01:32 AM	#18
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: parting a 72 blazer 4x4 how much for rear bumper brackets How much for seat brackets (under the aftermarket buckets)? Thanks! __________________ Looking for a 67-72 swb or blazer project in or around VA. Last edited by VA72C10; 09-05-2010 at 01:33 AM.

09-05-2010, 04:00 AM	#19
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: parting a 72 blazer 4x4 Hey Randy, looks like something I'd drag home! Last one I got that had "factory" buckets, had seats out of a 66 GTO. Dang the luck! I could use the rear top to body straps with the catches for the hatch if noboby else needs them. Thanks, Sharpie

09-05-2010, 07:26 AM	#20
k5blazin Senior Member Join Date: Oct 2009 Location: potsdam ny Posts: 402	Re: parting a 72 blazer 4x4 i am interested in the chrome shifter if it gets to me! also if it is for a sm465. thanks.

09-05-2010, 07:29 AM	#21
k5blazin Senior Member Join Date: Oct 2009 Location: potsdam ny Posts: 402	Re: parting a 72 blazer 4x4 is the wire whip for the dome lights in the top still there?

09-05-2010, 09:18 AM	#22
tjsblazer Registered User Join Date: Oct 2009 Location: Great White North Posts: 1,520	Re: parting a 72 blazer 4x4 Interested in: 1)Brake / Clutch pedal setup including all clutch linkages and springs , from pedal to throwout including engine ball, Zbar, frame mount, etc. 2)Rr bumper splash sheilds, I actually only need one side but I can't remember which till I can look again Mon 3)tranny hump - (4spd 4x4) This is for a frame off, so all parts would need to be good potentials for restoration. No rush, just let me know when you get a chance. Thanks, Jeff. Posted via Mobile Device __________________ Jeff. '72 Blazer K5 "Camshaft opinions are like belly buttons; everyone has one and no two are alike" My Blazer Build: http://67-72chevytrucks.com/vboard/s...d.php?t=626752 My Engine Build: http://67-72chevytrucks.com/vboard/s...d.php?t=637336

09-05-2010, 09:28 AM	#23
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 72 blazer 4x4 guys I'll try to get the stuff you all are asking about off today if possible and get you some better pics. if I don't get them off I'll atleast get you all some prices Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 09-05-2010 at 09:29 AM.

09-05-2010, 10:13 AM	#24
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,148	Re: parting a 72 blazer 4x4 Randy, I would be interested in the roll bar and console as well. What do the tires and wheels look like as well? Thanks Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever Last edited by 71blksuper4x4; 09-05-2010 at 10:17 AM.

09-05-2010, 10:25 AM	#25
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 72 blazer 4x4 Trevor, I have one guy ahead of you on console and roll bar but I don't know about shipping roll bar. The 35 inch tires have good tread, but have weather cracks inside tread but hold air no problem, the wheels are supposed to be 10 inch wheels, they are not scarred up. I priced the tires and wheels to a guy here in town for $300, I don't think he has any money though. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.