KS parting a 72 blazer 4x4 - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**71blksuper4x4** · 09-06-2010, 12:37 AM

Quote:

Originally Posted by VA72C10

This was what confused me...how much for an inner and outer set...and those must be 72 specific because my 71's inners were different as well as the repops I ordered. But that's cool because I'm looking for a 72 set! Thanks again!!!

I believe '72 is specific to '72. I believe they don't use inners, but just strickly outers because of how the frame horns are in the rear. Thus, the 2 indents in the rear bed crossmember. Randy, should be able to clarify for you for sure.

Back to the thread, Randy, put me down for the transfer case boot, and keep me posted on the console and roll bar. Is the rollbar the more correct factory/dealer hickey bar? I am not real good with blazer parts. Thanks Trevor

**6t727t2** · 09-06-2010, 01:17 PM

Randy, also would take the pass side floor hold down bracket. When the dust clears let me know about hatch guts, door/jamb pcs, any/all top to body brackets also. Thanks, Harry

teeitup · 09-06-2010, 04:49 PM

VA72C10, 72 did not have inner brackets, tehy were frame horns like the front ends. These looked fine with bumper, they have been cut on top side to go around body bolt. $35 for set of 4.
Trevor, the boot has one small tear, cannot be seen. I'll give him till tomorrow on the console. The roll bar looks good but I am also unsure about hickey/dealer.
Harry, seat bracket has been spoke for already, sorry. I'll get with you later this week once I find out what everyone wants
Thanks Randy

teeitup · 09-06-2010, 04:50 PM

182222

teeitup · 09-06-2010, 04:51 PM

877777777777

teeitup · 09-06-2010, 04:52 PM

windshield frame is pretty good, only the corners on side that has the plate. No rust in any other corners, one spot on firewall

teeitup · 09-06-2010, 04:53 PM

97777777777

teeitup · 09-06-2010, 04:54 PM

2022222222

teeitup · 09-06-2010, 04:55 PM

207777777

teeitup · 09-06-2010, 04:55 PM

dsdsds

teeitup · 09-06-2010, 05:01 PM

OK I basically got it all parted and pics for everyone, please let me know if you want more pics. I'll keep tearing apart some other stuff I have spoken for already. Please let me know what parts you want me to get shipping prices on. Thanks for your patience, Randy

red71cheyenne · 09-06-2010, 05:08 PM

Whoo doggy!! You tore that thing right up! Don't suppose I could talk you into throwing that battery hold down into my box with the door caps could I? Hmmm?

**88JRFAN** · 09-06-2010, 08:06 PM

I want the intake. Checking on block. Can pick up this weekend.

**too much stuff** · 09-06-2010, 08:49 PM

Boy randy, you don't mess around! Any thoughts on the tach, gauge cluster, BB extension? Thanks, Eric

teeitup · 09-06-2010, 09:20 PM

Jeff, got you covered
Daren, I'll get number off block, I don't know if its a 4 bolt or 2
Eric, not sure on tach, ext is $25
Thanks Randy

teeitup · 09-06-2010, 09:48 PM

block number

red71cheyenne · 09-06-2010, 11:00 PM

Thanks Randy!!!

72Levi · 09-06-2010, 11:13 PM

Ok Randy thank you for the good pics of the console with cracks. How much shipped to TX 78015? Price on the roll bar? Shipping is tough though. Will you throw in the ash tray from a diff thread? Thank you.
Posted via Mobile Device

teeitup · 09-06-2010, 11:26 PM

72Levi, $60 for the roll bar but unsure about shipping. Thanks Randy

72Levi · 09-06-2010, 11:29 PM

Good price on rb, Ugh give me 1-2 days to work on shipping roll bar, thanks, and waiting on console price.
Posted via Mobile Device

orange72blazer · 09-07-2010, 11:04 AM

How much for the door latch reinforcement plates & the wiper arms? & shipping to 49315?
Thanks

hgs_notes · 09-07-2010, 01:06 PM

Can you give me an estimate for shipping on the gas tank? I know it's not heavy, but kind of bulky.

teeitup · 09-07-2010, 06:00 PM

Orange72blazer, pass side reinforcement plate is dinged up quite a bit. $30 shipped for them and original Trico wipers
hgs_notes, total sent
Thanks Randy

70BLAZERX2 · 09-07-2010, 08:17 PM

randy,take a scraper to the pad in front of passenger cyl head. (Block deck).Get the #s and code off there..I can tell you what motor is and what year..by the casting # and date that is above the bellhousing by or near the top 2 bell bolts.. I have all the codes in my comp.

72Levi · 09-07-2010, 09:29 PM

Randy, I'll take the console, thank you, pm sent with info.

09-06-2010, 01:17 PM	#77
6t727t2 Active Member Join Date: Dec 2004 Location: NJ Posts: 6,430	Re: parting a 72 blazer 4x4 Randy, also would take the pass side floor hold down bracket. When the dust clears let me know about hatch guts, door/jamb pcs, any/all top to body brackets also. Thanks, Harry

09-06-2010, 04:49 PM	#78
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 72 blazer 4x4 VA72C10, 72 did not have inner brackets, tehy were frame horns like the front ends. These looked fine with bumper, they have been cut on top side to go around body bolt. $35 for set of 4. Trevor, the boot has one small tear, cannot be seen. I'll give him till tomorrow on the console. The roll bar looks good but I am also unsure about hickey/dealer. Harry, seat bracket has been spoke for already, sorry. I'll get with you later this week once I find out what everyone wants Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-06-2010, 04:50 PM	#79
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 72 blazer 4x4 182222 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-06-2010, 04:51 PM	#80
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 72 blazer 4x4 877777777777 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-06-2010, 04:52 PM	#81
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 72 blazer 4x4 windshield frame is pretty good, only the corners on side that has the plate. No rust in any other corners, one spot on firewall Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 09-06-2010 at 04:57 PM.

09-06-2010, 04:53 PM	#82
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 72 blazer 4x4 97777777777 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-06-2010, 04:54 PM	#83
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 72 blazer 4x4 2022222222 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-06-2010, 04:55 PM	#84
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 72 blazer 4x4 207777777 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-06-2010, 04:55 PM	#85
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 72 blazer 4x4 dsdsds Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-06-2010, 05:01 PM	#86
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 72 blazer 4x4 OK I basically got it all parted and pics for everyone, please let me know if you want more pics. I'll keep tearing apart some other stuff I have spoken for already. Please let me know what parts you want me to get shipping prices on. Thanks for your patience, Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-06-2010, 05:08 PM	#87
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Re: parting a 72 blazer 4x4 Whoo doggy!! You tore that thing right up! Don't suppose I could talk you into throwing that battery hold down into my box with the door caps could I? Hmmm? __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty

09-06-2010, 08:06 PM	#88
88JRFAN LET'S GO RACIN' Join Date: Oct 2007 Location: SALINA,KS Posts: 1,212	Re: parting a 72 blazer 4x4 I want the intake. Checking on block. Can pick up this weekend. __________________ Daren 04 Chevy Extend cab 2500HD 6.0 Liter 4x4 71 CHEVY 3/4 4X4 402 BB, th400/np205, dana44/eaton ho52 w/4:10-TOY Rip El Jay RIP BOBBO'S MOM

09-06-2010, 08:49 PM	#89
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,697	Re: parting a 72 blazer 4x4 Boy randy, you don't mess around! Any thoughts on the tach, gauge cluster, BB extension? Thanks, Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

09-06-2010, 09:20 PM	#90
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 72 blazer 4x4 Jeff, got you covered Daren, I'll get number off block, I don't know if its a 4 bolt or 2 Eric, not sure on tach, ext is $25 Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-06-2010, 09:48 PM	#91
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 72 blazer 4x4 block number Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

09-06-2010, 11:00 PM	#92
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Re: parting a 72 blazer 4x4 Thanks Randy!!! __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty

09-06-2010, 11:13 PM	#93
72Levi Active Member Join Date: Feb 2006 Location: sa tx Posts: 851	Re: parting a 72 blazer 4x4 Ok Randy thank you for the good pics of the console with cracks. How much shipped to TX 78015? Price on the roll bar? Shipping is tough though. Will you throw in the ash tray from a diff thread? Thank you. Posted via Mobile Device __________________ 1972 K5 Blazer ALL ORIGINAL paint & engine, A/C, Tilt, 4sp, AM/FM, Tow Hooks, Aux Battery Tray, Tach, Vacuum 2004 FORD FX4 SuperCrew 2005 CTS-V 12 sec family car 2008 Buick Enclave AWD, Nav, & DVD, Wife LOVES it!

09-06-2010, 11:26 PM	#94
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 72 blazer 4x4 72Levi, $60 for the roll bar but unsure about shipping. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-06-2010, 11:29 PM	#95
72Levi Active Member Join Date: Feb 2006 Location: sa tx Posts: 851	Re: parting a 72 blazer 4x4 Good price on rb, Ugh give me 1-2 days to work on shipping roll bar, thanks, and waiting on console price. Posted via Mobile Device __________________ 1972 K5 Blazer ALL ORIGINAL paint & engine, A/C, Tilt, 4sp, AM/FM, Tow Hooks, Aux Battery Tray, Tach, Vacuum 2004 FORD FX4 SuperCrew 2005 CTS-V 12 sec family car 2008 Buick Enclave AWD, Nav, & DVD, Wife LOVES it!

09-07-2010, 11:04 AM	#96
orange72blazer Registered User Join Date: Dec 2003 Location: West Michigan Posts: 447	Re: parting a 72 blazer 4x4 How much for the door latch reinforcement plates & the wiper arms? & shipping to 49315? Thanks __________________ 1972 Chevy Blazer 1997 GMC Sierra 2009 Chevy Tahoe

09-07-2010, 01:06 PM	#97
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,107	Re: parting a 72 blazer 4x4 Can you give me an estimate for shipping on the gas tank? I know it's not heavy, but kind of bulky. __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

09-07-2010, 06:00 PM	#98
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 72 blazer 4x4 Orange72blazer, pass side reinforcement plate is dinged up quite a bit. $30 shipped for them and original Trico wipers hgs_notes, total sent Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-07-2010, 08:17 PM	#99
70BLAZERX2 Registered User Join Date: Jan 2010 Location: GREENEVILLE TENNESSEE Posts: 1,311	Re: parting a 72 blazer 4x4 randy,take a scraper to the pad in front of passenger cyl head. (Block deck).Get the #s and code off there..I can tell you what motor is and what year..by the casting # and date that is above the bellhousing by or near the top 2 bell bolts.. I have all the codes in my comp.

09-07-2010, 09:29 PM	#100
72Levi Active Member Join Date: Feb 2006 Location: sa tx Posts: 851	Re: parting a 72 blazer 4x4 Randy, I'll take the console, thank you, pm sent with info. __________________ 1972 K5 Blazer ALL ORIGINAL paint & engine, A/C, Tilt, 4sp, AM/FM, Tow Hooks, Aux Battery Tray, Tach, Vacuum 2004 FORD FX4 SuperCrew 2005 CTS-V 12 sec family car 2008 Buick Enclave AWD, Nav, & DVD, Wife LOVES it! Last edited by 72Levi; 09-07-2010 at 09:29 PM.

Register or Log In To remove these advertisements.