NY Parting a '72 Blazer 4x4 - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

real68chevy · 10-12-2011, 11:36 PM

hey is there any seat in it

ORANGBLAZ · 10-12-2011, 11:40 PM

Quote:

Originally Posted by real68chevy

hey is there any seat in it

No original buckets, just the rear seat. Someone attached the front seat brackets to a ratty set of '80s (?) Camaro seats.

**WETOWM** · 10-13-2011, 08:21 AM

I am needing the 2 u bolts and lower plate that bolts to the tie rod for the steering shock stabalizer thanks rich

bigrigpardo · 10-13-2011, 08:49 AM

ca n you get some pics of the cracking and chips on the hard top. i will be up in wappingers fals in a week or two to drop a friends car off and would love to bring this home.

ORANGBLAZ · 10-13-2011, 05:36 PM

Quote:

Originally Posted by WETOWM

I am needing the 2 u bolts and lower plate that bolts to the tie rod for the steering shock stabalizer thanks rich

You got it! How's $20 shipped?

ORANGBLAZ · 10-13-2011, 05:42 PM

Noticed that one of the side strips has rust holes, so grabbed an orange one that I had, but noticed that its got a small hole. The green one is good.

Name: 040.jpg
Views: 436
Size: 26.6 KB

ORANGBLAZ · 10-13-2011, 05:44 PM

Tailgate strip. Looks to be pretty straight. The bottom on the one end is a little gnarly, but didn't find any holes.

Name: 046.jpg
Views: 438
Size: 48.4 KB

ORANGBLAZ · 10-13-2011, 07:45 PM

Roill bar pics. There is some grind marks(?) on the inside corners of the hoop, and several small holes. Could be filled, or just recover in new padding. Otherwise pretty nice. Was covered in foam, so paint looks good. A little rusted on the bases, but still very thick, and should clean up good.

Name: 011.jpg
Views: 493
Size: 100.2 KB

ORANGBLAZ · 10-13-2011, 07:53 PM

Rear seat. Foam and frame are good, so may be a solid candidate for recovering, or clean up and use 'as is'. There are only two stands on the back, and no hold downs. I also have a black one that is nice, and includes all the brackets, the hold downs, and 2 pairs of good seat belts for $250.

Name: 008.jpg
Views: 427
Size: 65.1 KB

ORANGBLAZ · 10-13-2011, 07:58 PM

Quote:

Originally Posted by bigrigpardo

ca n you get some pics of the cracking and chips on the hard top. i will be up in wappingers fals in a week or two to drop a friends car off and would love to bring this home.

I have 2 tops, and both are in decent condition but will need a little work. I will post pics tomorrow and get you hooked up. Where in Wappingers? The tops are in LaGrange on 55 just outside of P'keepsie, so should be nice and close.

JBerno · 10-13-2011, 08:26 PM

Quote:

Originally Posted by ORANGBLAZ

Roill bar pics. There is some grind marks(?) on the inside corners of the hoop, and several small holes. Could be filled, or just recover in new padding. Otherwise pretty nice. Was covered in foam, so paint looks good. A little rusted on the bases, but still very thick, and should clean up good.

Attachment 813896

Attachment 813897

Attachment 813898

Attachment 813899

Attachment 813900

What kind of price on this? Are you willing to ship? If so can I get a complete price to 40204

bigrigpardo · 10-13-2011, 09:07 PM

just off 9 a few miles north of 84

bigrigpardo · 10-13-2011, 09:11 PM

yea i have a 72 at home but i want a hard top for it so i can keep it outside and not worry about a tarp and snowloads in the winter

ORANGBLAZ · 10-13-2011, 09:16 PM

Quote:

Originally Posted by bigrigpardo

yea i have a 72 at home but i want a hard top for it so i can keep it outside and not worry about a tarp and snowloads in the winter

I'm in Fishkill on 52 past the diner. Beacon is our mailing address.
Also parting out a '72 3/4 ton pickup. Were you looking for diffs?

bigrigpardo · 10-13-2011, 09:24 PM

i am always looking. what can u tell me about the k20. does it have a decent cab. ha ha yea right not in ny but had to ask. what diffs are it it. does it have a decent seat. and a shot in the dark. do you still have that nos tailgate????

ORANGBLAZ · 10-13-2011, 09:26 PM

Quote:

Originally Posted by JBerno

What kind of price on this? Are you willing to ship? If so can I get a complete price to 40204

Looking to get $150, and shipping Greyhound would be around $75. Waiting to hear from lynnfield and 72gmguy.

**72gmguy** · 10-13-2011, 09:30 PM

If you come this way or we could meet, I am interested in the roll bar.

ORANGBLAZ · 10-13-2011, 09:34 PM

Quote:

Originally Posted by bigrigpardo

i am always looking. what can u tell me about the k20. does it have a decent cab. ha ha yea right not in ny but had to ask. what diffs are it it. does it have a decent seat. and a shot in the dark. do you still have that nos tailgate????

Got it for scrap, really. It has tinted glass, a nice slider, seat looks like it could be recovered. Body is junk, but the tailgate's not horrible. A little bent and some holes in the bottom. Its got a big hub Dana 44 up front and an HO52 open rear w/ 4.10s. DeadheadNM picked up the tailgate a few months back on his way from Boston to NM.

bigrigpardo · 10-13-2011, 09:38 PM

whats with the doubler set up. do u still have it is it compete???? what would you want for it?

ORANGBLAZ · 10-13-2011, 09:41 PM

My bad. Went back and checked, and it turned out to be just a 203 that someone had awkwardly stuffed under the truck.

bigrigpardo · 10-13-2011, 09:44 PM

damn that would have been cool to get. what were the specs on the truck motor trans any cool options. ac etc. what would u want for the front 44.

ORANGBLAZ · 10-13-2011, 09:56 PM

Nothing special on this thing. Has a newer 350/TH350 and a 203 sitting on the original 205 mount. Motor is stuck, tranny case is busted. I'm guessing that someone started to fix this thing and gave up.
How's $100 for the front diff? I may have misspoke before about it being a big hub. It is 8 lug, but not sure about the different variations.

*mrdana60* · 10-13-2011, 09:57 PM

whats left of the frame ? i need the spring hangers off the front.

bigrigpardo · 10-13-2011, 09:58 PM

i just need it to be disc and have 4.10 gears

ORANGBLAZ · 10-13-2011, 10:01 PM

Quote:

Originally Posted by mrdana60

whats left of the frame ? i need the spring hangers off the front.

They look to be good. How's $50 shipped? I will need a week or so to get 'em off.

10-12-2011, 11:36 PM	#26
real68chevy Registered User Join Date: Jul 2011 Location: pasco wa' 99301 Posts: 15	Re: Parting a '72 Blazer 4x4 hey is there any seat in it

10-13-2011, 08:21 AM	#28
WETOWM Senior Member Join Date: Jun 2011 Location: ST LOUIS MO Posts: 2,096	Re: Parting a '72 Blazer 4x4 I am needing the 2 u bolts and lower plate that bolts to the tie rod for the steering shock stabalizer thanks rich

10-13-2011, 08:49 AM	#29
bigrigpardo Registered User Join Date: Sep 2008 Location: NEW MILFORD NJ Posts: 1,453	Re: Parting a '72 Blazer 4x4 ca n you get some pics of the cracking and chips on the hard top. i will be up in wappingers fals in a week or two to drop a friends car off and would love to bring this home.

10-13-2011, 05:42 PM	#31
ORANGBLAZ Registered User Join Date: Jun 2010 Location: Cairo,NY Posts: 353	Re: Parting a '72 Blazer 4x4 Noticed that one of the side strips has rust holes, so grabbed an orange one that I had, but noticed that its got a small hole. The green one is good.

10-13-2011, 05:44 PM	#32
ORANGBLAZ Registered User Join Date: Jun 2010 Location: Cairo,NY Posts: 353	Re: Parting a '72 Blazer 4x4 Tailgate strip. Looks to be pretty straight. The bottom on the one end is a little gnarly, but didn't find any holes.

10-13-2011, 07:45 PM	#33
ORANGBLAZ Registered User Join Date: Jun 2010 Location: Cairo,NY Posts: 353	Re: Parting a '72 Blazer 4x4 Roill bar pics. There is some grind marks(?) on the inside corners of the hoop, and several small holes. Could be filled, or just recover in new padding. Otherwise pretty nice. Was covered in foam, so paint looks good. A little rusted on the bases, but still very thick, and should clean up good.

10-13-2011, 07:53 PM	#34
ORANGBLAZ Registered User Join Date: Jun 2010 Location: Cairo,NY Posts: 353	Re: Parting a '72 Blazer 4x4 Rear seat. Foam and frame are good, so may be a solid candidate for recovering, or clean up and use 'as is'. There are only two stands on the back, and no hold downs. I also have a black one that is nice, and includes all the brackets, the hold downs, and 2 pairs of good seat belts for $250.

10-13-2011, 09:07 PM	#37
bigrigpardo Registered User Join Date: Sep 2008 Location: NEW MILFORD NJ Posts: 1,453	Re: Parting a '72 Blazer 4x4 just off 9 a few miles north of 84

10-13-2011, 09:11 PM	#38
bigrigpardo Registered User Join Date: Sep 2008 Location: NEW MILFORD NJ Posts: 1,453	Re: Parting a '72 Blazer 4x4 yea i have a 72 at home but i want a hard top for it so i can keep it outside and not worry about a tarp and snowloads in the winter

10-13-2011, 09:24 PM	#40
bigrigpardo Registered User Join Date: Sep 2008 Location: NEW MILFORD NJ Posts: 1,453	Re: Parting a '72 Blazer 4x4 i am always looking. what can u tell me about the k20. does it have a decent cab. ha ha yea right not in ny but had to ask. what diffs are it it. does it have a decent seat. and a shot in the dark. do you still have that nos tailgate????

10-13-2011, 09:30 PM	#42
72gmguy Senior Member Join Date: Mar 2009 Location: Brigantine NJ Posts: 819	Re: Parting a '72 Blazer 4x4 If you come this way or we could meet, I am interested in the roll bar. __________________ Jeremy 1969 Blazer 4x4 original cst 1971 Blazer partial 2wd convert 1972 Blazer 4x4 original cst 1970 Blazer 4x4 w/ 2 1/2in lift and 33in tires w/4 wheel camper 1970 4x4 suburban w/ 6in lift and 35in tires 1968 Corvette convertible 1970 Malibu convertible 1959 Brookwood wagon 1972 International Scout ii

10-13-2011, 09:38 PM	#44
bigrigpardo Registered User Join Date: Sep 2008 Location: NEW MILFORD NJ Posts: 1,453	Re: Parting a '72 Blazer 4x4 whats with the doubler set up. do u still have it is it compete???? what would you want for it?

10-13-2011, 09:41 PM	#45
ORANGBLAZ Registered User Join Date: Jun 2010 Location: Cairo,NY Posts: 353	Re: Parting a '72 Blazer 4x4 My bad. Went back and checked, and it turned out to be just a 203 that someone had awkwardly stuffed under the truck.

10-13-2011, 09:44 PM	#46
bigrigpardo Registered User Join Date: Sep 2008 Location: NEW MILFORD NJ Posts: 1,453	Re: Parting a '72 Blazer 4x4 damn that would have been cool to get. what were the specs on the truck motor trans any cool options. ac etc. what would u want for the front 44.

10-13-2011, 09:56 PM	#47
ORANGBLAZ Registered User Join Date: Jun 2010 Location: Cairo,NY Posts: 353	Re: Parting a '72 Blazer 4x4 Nothing special on this thing. Has a newer 350/TH350 and a 203 sitting on the original 205 mount. Motor is stuck, tranny case is busted. I'm guessing that someone started to fix this thing and gave up. How's $100 for the front diff? I may have misspoke before about it being a big hub. It is 8 lug, but not sure about the different variations.



Register or Log In To remove these advertisements.

10-13-2011, 09:57 PM	#48
mrdana60 Account Suspended Join Date: Sep 2010 Location: centre al Posts: 2,472	Re: Parting a '72 Blazer 4x4 whats left of the frame ? i need the spring hangers off the front.

10-13-2011, 09:58 PM	#49
bigrigpardo Registered User Join Date: Sep 2008 Location: NEW MILFORD NJ Posts: 1,453	Re: Parting a '72 Blazer 4x4 i just need it to be disc and have 4.10 gears

Register or Log In To remove these advertisements.