The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current Classic GM Trucks Classifieds > The 1967-1972 Chevrolet & GMC Pickups Parts Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 06-07-2009, 10:53 PM   #1
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 22,380
Power Brake Booster Adapter Bracket

Here is the latest version of the power brake booster adapter bracket that I've been making since 1993. This bracket is fabricated from laser cut 10ga mild steel and fits 1967-'72 Chevy and GMC Pickups, Suburbans and panels and is 100% bolt on using holes already in your firewall. The booster side of the bracket has a 3 3/8" x 3 1/2" hole pattern. Boosters with this pattern are commonly found on S10's and full size pickups, Suburbans, Blazers and Tahoes from 1988 to at least 1998. Of course you will have to join the booster pushrod to your stock MC pushrod that attaches to your brake pedal. This can be done by either threading both ends and using a coupling nut, or by just welding them together once you determine the correct length.

I have had the original version ('63-'66) of this bracket on my '66 Suburban and have driven over 120,000 miles with no issues. I have also installed these on a couple of local pickups with good results as well. If you are wanting to add hydroboost to your pickup, Suburban or Panel I also offer a mounting plate for the hydroboost HERE

The price on the bare steel brackets is $55.00 plus a flat $14.35 shipping in the US. If you are located elsewhere contact me for shipping charges. You can also get this bracket in a satin black powder coat for an additional $9.00. Mounting hardware is included. This pricing is always current and up to date.To place an order and for payment information either send me a PM here on the forum or email me at captainfab454@hotmail.com
Attached Images
     
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE

Last edited by Captainfab; 01-30-2019 at 01:03 AM. Reason: shipping cost increase
Captainfab is offline   Reply With Quote
Old 06-07-2009, 10:57 PM   #2
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 22,380
Re: Power Brake Booster Adapter Bracket

More pics......
Attached Images
     
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE

Last edited by Captainfab; 08-12-2009 at 10:44 PM.
Captainfab is offline   Reply With Quote
Old 06-07-2009, 10:59 PM   #3
STOCKISH
Formerly- 1972SuperCheyenne
 
STOCKISH's Avatar
 
Join Date: Oct 2008
Location: Wake Forest NC
Posts: 5,693
Re: Power Brake Booster Adapter Bracket

Nice part. Looks like it would clear up alot of space for us BBC guys.
__________________
--Josh

My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=717887

A good crossthread is better than Loctite any day.

Life is not about what you have, but who you have to share it with.
STOCKISH is offline   Reply With Quote
Old 06-08-2009, 12:43 AM   #4
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 22,380
Re: Power Brake Booster Adapter Bracket

Thanks Josh
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 06-08-2009, 09:11 AM   #5
72SWBChevy
Registered User
 
72SWBChevy's Avatar
 
Join Date: Jun 2004
Location: Houston Tx
Posts: 753
Re: Power Brake Booster Adapter Bracket

NIce work. I will have to place this on my list of "to buy" items. Craig
__________________
1977 Camaro 468 BBC - SOLD -
1972 Chevy SWB....in the works!!

2006 Crew Cab Dmax/Allison Summit White-SOLD-
2009 Toyota Tacoma V6 Pre Runner - daily driver -

my build thread -http://67-72chevytrucks.com/vboard/s...95#post4774595
72SWBChevy is offline   Reply With Quote
Old 06-17-2009, 09:56 PM   #6
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 22,380
Re: Power Brake Booster Adapter Bracket

Bump for those having trouble finding this thread
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 08-07-2009, 12:15 AM   #7
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 22,380
Re: Power Brake Booster Adapter Bracket

Haven't bumped this in a while......
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 12-20-2009, 12:23 AM   #8
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 22,380
Re: Power Brake Booster Adapter Bracket

Checkout the December deal over in the 'Vendor Marketplace' HERE
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 05-25-2010, 12:40 AM   #9
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 22,380
Re: Power Brake Booster Adapter Bracket

Bump.......
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 05-25-2010, 02:42 AM   #10
hddavis
Registered User
 
Join Date: Mar 2010
Location: Rogersville, MO
Posts: 33
Re: Power Brake Booster Adapter Bracket

do you know if this bracket and the 88 to 98 booster set up will work on a 70 c10 with drums on all four
hddavis is offline   Reply With Quote
Old 05-25-2010, 11:06 PM   #11
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 22,380
Re: Power Brake Booster Adapter Bracket

Yep, no problem. You just need a power brake master for a drum/drum system. The one I use on my Suburban is a power brake master for a '67-'70 truck.

Quote:
Originally Posted by hddavis View Post
do you know if this bracket and the 88 to 98 booster set up will work on a 70 c10 with drums on all four
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 05-26-2010, 03:13 AM   #12
hddavis
Registered User
 
Join Date: Mar 2010
Location: Rogersville, MO
Posts: 33
Re: Power Brake Booster Adapter Bracket

i read on here somewhere that the factory man drum master would work
hddavis is offline   Reply With Quote
Old 05-26-2010, 01:49 PM   #13
hddavis
Registered User
 
Join Date: Mar 2010
Location: Rogersville, MO
Posts: 33
Re: Power Brake Booster Adapter Bracket

do know if that is so
hddavis is offline   Reply With Quote
Old 05-26-2010, 11:50 PM   #14
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 22,380
Re: Power Brake Booster Adapter Bracket

I have not tried that. On the manual master cylinders, the bore in the backside of the piston is deeper than on a power master cylinder. So I suppose if you wanted to make a new pushrod to go between the booster and the master, it could be done. But I wouldn't mess with it. A rebuilt power master isn't that much $$

Quote:
Originally Posted by hddavis View Post
i read on here somewhere that the factory man drum master would work
Quote:
Originally Posted by hddavis View Post
do know if that is so
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 06-11-2010, 08:33 AM   #15
mbrekke
Registered User
 
Join Date: Jan 2009
Location: saginaw mn
Posts: 24
Re: Power Brake Booster Adapter Bracket

if I use your bracket on a '72 will a booster out of a '92 bolt right in or will I need to modify the rod that connects to the pedal. Do I just pm you to buy a bracket?
mbrekke is offline   Reply With Quote
Old 06-11-2010, 11:01 PM   #16
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 22,380
Re: Power Brake Booster Adapter Bracket

Since a '92 full sized truck booster falls within the '88-'98 range, yes it will bolt up. The pushrod will need to be lengthened to reach your pedal. Yes, just send me a PM to purchase.
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 11-03-2010, 11:35 PM   #17
swamp rat
Senior Member
 
swamp rat's Avatar
 
Join Date: Oct 2007
Location: Spanaway
Posts: 8,436
Re: Power Brake Booster Adapter Bracket

Is this for trucks without a booster altogether? or are the newer boosters that much better than the one on my 72?
__________________
Mike.

Swamp Rat build thread :
http://67-72chevytrucks.com/vboard/s...d.php?t=595019

72 3/4T 4X4
4" BDS Lift
33" BFG's
swamp rat is offline   Reply With Quote
Old 01-31-2011, 05:49 AM   #18
Sultan88
Account Suspended
 
Join Date: Jan 2011
Location: maldives
Posts: 6
diagnostic

Spam

Last edited by 70cst; 01-31-2011 at 09:31 AM.
Sultan88 is offline   Reply With Quote
Old 02-22-2011, 12:59 AM   #19
stich626
Account Suspended
 
Join Date: Sep 2010
Location: hingham ma
Posts: 1,721
Re: Power Brake Booster Adapter Bracket

ttt just so I can find this later
stich626 is offline   Reply With Quote
Old 04-13-2011, 06:54 AM   #20
mcmlxix
Collector of Projects
 
mcmlxix's Avatar
 
Join Date: Apr 2003
Location: Las Vegas
Posts: 2,976
Re: Power Brake Booster Adapter Bracket

Quote:
Originally Posted by stich626 View Post
ttt just so I can find this later
x2
__________________
Rich
1972 K5 Blazer CST Click HERE
mcmlxix is offline   Reply With Quote
Old 05-06-2011, 09:05 PM   #21
jocko
Senior Member
 
jocko's Avatar
 
Join Date: Oct 2009
Location: Burleson, TX
Posts: 16,094
Re: Power Brake Booster Adapter Bracket

Captain,
Received the bracket in the mail today - beautiful piece of gear, thanks very much.

For everyone else's reference - I bought a 75 Impala Booster and a 67 C10 Drum/Drum master cylinder to use on this - all the parts fit together with no mods or hole drilling. Part arrived vacuum packed and is PC'ed beautifully. (I have not mounted it to the firewall yet - only speaking of the mc-to-booster-bracket so far, but I know it will fit the firewall also).

I'll post the install if I ever get off these #$%^&* cruthces... but here are the O'Reily's part numbers if you're interested (btw, same stuff/store as "Kragens"):

67 C10 Master Cyl ($18.99 + $10 core) Part # 10-1329 (Note: the part number on the website appears to be incorrect (13-1329) – when I called O’Reilly’s, they didn’t list this part number – they list the MC under 10-1329, and the receipt showed this as well – I think the website must be either a typo or an old part number. But what I bought looks exactly like what is in the link and its part # at O’Reilly’s is 10-1329)
75 Impala Booster ($104.99 + $10 core) Part # 54-81002

Thanks again Captain, appreciate the quick deliv and great craftsmanship.

Last edited by jocko; 05-06-2011 at 09:11 PM.
jocko is offline   Reply With Quote
Old 01-19-2016, 09:40 PM   #22
62LS1
Registered User
 
62LS1's Avatar
 
Join Date: Dec 2008
Location: Spring, TX
Posts: 54
Re: Power Brake Booster Adapter Bracket

Quote:
Originally Posted by jocko View Post
Captain,
Received the bracket in the mail today - beautiful piece of gear, thanks very much.

For everyone else's reference - I bought a 75 Impala Booster and a 67 C10 Drum/Drum master cylinder to use on this - all the parts fit together with no mods or hole drilling. Part arrived vacuum packed and is PC'ed beautifully. (I have not mounted it to the firewall yet - only speaking of the mc-to-booster-bracket so far, but I know it will fit the firewall also).

I'll post the install if I ever get off these #$%^&* cruthces... but here are the O'Reily's part numbers if you're interested (btw, same stuff/store as "Kragens"):

67 C10 Master Cyl ($18.99 + $10 core) Part # 10-1329 (Note: the part number on the website appears to be incorrect (13-1329) – when I called O’Reilly’s, they didn’t list this part number – they list the MC under 10-1329, and the receipt showed this as well – I think the website must be either a typo or an old part number. But what I bought looks exactly like what is in the link and its part # at O’Reilly’s is 10-1329)
75 Impala Booster ($104.99 + $10 core) Part # 54-81002

Thanks again Captain, appreciate the quick deliv and great craftsmanship.

Just so you know, the 13- part number is a new MC from Cardone. The 10- part number is a reman MC from Cardone. I don't believe O'Reilly sells the 13- new versions. I worked for Cardone for 20 years.
__________________
Too many dreams, too little money.
62LS1 is offline   Reply With Quote
Old 05-21-2011, 12:50 AM   #23
doubleRdazz
Registered User
 
Join Date: May 2011
Location: jersey
Posts: 45
Re: Power Brake Booster Adapter Bracket

My truck is manual brakes with drums all around and column shift. So this bracket wont work? Do you make one that will?
Posted via Mobile Device
doubleRdazz is offline   Reply With Quote
Old 05-21-2011, 12:59 AM   #24
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 22,380
Re: Power Brake Booster Adapter Bracket

No, sorry this is the only booster bracket that I make for the '67-'72's. With the column shift you will have to use the factory booster and brackets that move the booster much farther from the firewall.


Quote:
Originally Posted by doubleRdazz View Post
My truck is manual brakes with drums all around and column shift. So this bracket wont work? Do you make one that will?
Posted via Mobile Device
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 05-21-2011, 01:56 AM   #25
doubleRdazz
Registered User
 
Join Date: May 2011
Location: jersey
Posts: 45
Re: Power Brake Booster Adapter Bracket

Ah that sucks. Thanks for the quick reply tho.
Posted via Mobile Device
doubleRdazz is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:03 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.
Copyright 1997-2013 67-72chevytrucks.com