GA 2wd Frame for Blazer - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chuckmc8 · 10-09-2010, 08:00 AM

I had shortened a 1971 2wd truck frame for my 2wd Blazer project, then I was able to buy a 2wd Blazer project that has a frame, so I don't need this one. I documented the process when I shortened it, in case someone wanted to see how it was done. Pics below show that and I have lots more pics of the process.
The frame comes with 3:08 five lug differential and a front crossmember with stock 71 spindles and springs that can go with it, but no brake parts, upper A arms or draglink. It does have a nice Power steering box.

None of these are pics of the finished frame, these are just some that I had of the project that I had on my computer.

I will also sell this as a bare frame or with any combo of the parts listed

Will need Blazer Body Mounts added,Members here have those available.

The frame is freshly cleaned and painted semi gloss black.
Excellent start on 2wd Blazer

$500 picked up 30 miles west of Atlanta

I need a tach or a tach dash, tilt column and LS motor, so I'd trade on those or other stuff of 67-72 interest

10-09-2010, 08:00 AM	#1
chuckmc8 It's alsways something..... Join Date: Nov 2008 Location: Douglasville GA Posts: 1,171	2wd Frame for Blazer I had shortened a 1971 2wd truck frame for my 2wd Blazer project, then I was able to buy a 2wd Blazer project that has a frame, so I don't need this one. I documented the process when I shortened it, in case someone wanted to see how it was done. Pics below show that and I have lots more pics of the process. The frame comes with 3:08 five lug differential and a front crossmember with stock 71 spindles and springs that can go with it, but no brake parts, upper A arms or draglink. It does have a nice Power steering box. None of these are pics of the finished frame, these are just some that I had of the project that I had on my computer. I will also sell this as a bare frame or with any combo of the parts listed Will need Blazer Body Mounts added,Members here have those available. The frame is freshly cleaned and painted semi gloss black. Excellent start on 2wd Blazer $500 picked up 30 miles west of Atlanta I need a tach or a tach dash, tilt column and LS motor, so I'd trade on those or other stuff of 67-72 interest Attached Images __________________ 1968 RS Camaro 'Vert Matching number 327 and M21 Muncie 1968 C10 Black with red interior and orig paint. 5.3 / 4l60e,3:73 POSI 17" Torq Thrusts 1968 CST 514 Red with black interior. Buddy Buckets, Factory A/C, PS, PB- 20" AR custom shop TT, 5.3 and 4l60e Last edited by chuckmc8; 10-11-2010 at 05:55 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.