Soon to be Crewcab Dually - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Dinos63 · 05-24-2013, 12:03 PM

Quote:

Originally Posted by bodydropped68

Awesome rendering the colors look great.

THANKS KAT!

Quote:

Originally Posted by quest

Is there a truck or classic car show in Arizona you are referring to? Are these events posted somewhere on the site?

I WILL POST IT FOR YA ... WERE ARE DOING A ONE DAY BUILT AT MY HOUSE

Quote:

Originally Posted by Bomp

You got it all going on down there!
Wifey says if I did go to the 'one and done' get together I'd probably never come home.

Looking into getting a bigger flat screen for my computer so I can fit your CC Dually on it!

SHE MAYBE WRIGHT!

BIGGER SCREEN NICE

moose1008 · 05-27-2013, 06:39 PM

Hey Dino just a couple of questions. First are you going with the 2" extended control arms so you dont have to use spacers like on your last dually(bad ass btw). Second question is you mentioned Nate at PB was building your trailing arms? Are the 1 ton and 1/2 ton frames the same on the inside of the c channel allowing you to use the trialing arm cross member?

duallyjams · 05-28-2013, 02:29 PM

If you first don't succeed try try again but in Dino's case he succeeded the first time the second time the third time the fourth time ect ect ect........... I can't count that high I don't have enough fingers and toes, I think it breaks down to one truck build every quarter.

Dinos63 · 05-28-2013, 04:34 PM

Quote:

Originally Posted by moose1008

Hey Dino just a couple of questions. First are you going with the 2" extended control arms so you dont have to use spacers like on your last dually(bad ass btw). Second question is you mentioned Nate at PB was building your trailing arms? Are the 1 ton and 1/2 ton frames the same on the inside of the c channel allowing you to use the trialing arm cross member?

MOOSE YEAH nates making my arms 2" wider arms, some are and some are not (lame answer huh) my dually the frame was the same it was a c20 with a add on axle done by the dealer... i think the one tons are bigger not much help huh

Quote:

Originally Posted by duallyjams

If you first don't succeed try try again but in Dino's case he succeeded the first time the second time the third time the fourth time ect ect ect........... I can't count that high I don't have enough fingers and toes, I think it breaks down to one truck build every quarter.

very nice

**clemdaddy** · 05-29-2013, 06:04 AM

doing some fast work out there. don't know how you keep track with multiple builds going on at once. but you do. keep'er going dude, we'll be following along. dig the wheels... hope you keep the big block...

cbeeman63 · 05-29-2013, 11:18 AM

Sorry I missed the One Day Build. All my plans fell apart last minute.

I sold my T-Bucket project Friday to focus a little more time on my suburban and my vette! Priorities!!

I really like the rendering of the CC colors look great, stance is perfect!

Did you modify the trailer to haul the CC?

Dinos63 · 05-29-2013, 11:44 AM

Quote:

Originally Posted by clemdaddy

doing some fast work out there. don't know how you keep track with multiple builds going on at once. but you do. keep'er going dude, we'll be following along. dig the wheels... hope you keep the big block...

thanks clem , I like to keep the big block,but its get real tight in the engine bay with those 22" semi wheels

Quote:

Originally Posted by cbeeman63

Sorry I missed the One Day Build. All my plans fell apart last minute.

I sold my T-Bucket project Friday to focus a little more time on my suburban and my vette! Priorities!!

I really like the rendering of the CC colors look great, stance is perfect!

Did you modify the trailer to haul the CC?

next time , I did the mods to my trailer so with my lowered trucks I could open the doors to get out after I load them

creep · 05-29-2013, 12:02 PM

Quote:

Originally Posted by duallyjams

If you first don't succeed try try again but in Dino's case he succeeded the first time the second time the third time the fourth time ect ect ect........... I can't count that high I don't have enough fingers and toes, I think it breaks down to one truck build every quarter.

I just think of each truck as a new season in "The Dino Show".

Dinos63 · 05-29-2013, 05:36 PM

Quote:

Originally Posted by creep

I just think of each truck as a new season in "The Dino Show".

nice!

thanks wimpy for the new sketches of my truck too

Dinos63 · 05-29-2013, 05:40 PM

forgot the pic

moose1008 · 05-31-2013, 01:34 AM

Quote:

Originally Posted by Dinos63

MOOSE YEAH nates making my arms 2" wider arms, some are and some are not (lame answer huh) my dually the frame was the same it was a c20 with a add on axle done by the dealer... i think the one tons are bigger not much help huh

very nice

Thanks man! Can't wait to see what you have in store for us with this build
Posted via Mobile Device

vegadesign · 06-10-2013, 08:49 PM

Subscribed
Dying to see this build
Posted via Mobile Device

Dinos63 · 06-11-2013, 01:46 AM

I am ready too get started also, I have the chassi ready to go the sand blaster, and I get the rest of all my suspension from nate this week. I have my new crate motor and all the air ride stuff. We should have the blue truck ready to go to brothers in a few weeks then on the dually full speed

**superflysteiny** · 06-11-2013, 02:20 PM

I am on this build. I cant wait to see it completed.

creep · 06-11-2013, 06:10 PM

Hey, while your picking up you suspension parts why don'tcha give Nate a nudge to get those dang hood strut kits out already. The wait is killin' me.

This truck is gonna be what a crewcab AND a dually should be

Jmorales3181 · 06-11-2013, 06:46 PM

Yeah I think I'm going to need some of those fancy hinges too! Can't wait to see how this one comes out. The original dually was my favorite but am really liking the blue truck and now this....hard to chose with all these awesome trucks! C-10 godfather

Posted via Mobile Device

PBFAB.COM · 06-14-2013, 11:17 AM

Quote:

Originally Posted by creep

Hey, while your picking up you suspension parts why don'tcha give Nate a nudge to get those dang hood strut kits out already. The wait is killin' me.

This truck is gonna be what a crewcab AND a dually should be

Creep, I will get back on the hinges here shortly.... been waiting for some new toys to get here before we get back to the new products. Fortunately the wait for the equipment is almost over. Waterjet shows up Monday and press brake should be here Wednesday.

Not sure what the fuss is all about... ever wonder why Dino's arms are so huge? It's from opening the hoods on all these 60-66 trucks he builds! LOL

Nate

Dinos63 · 06-14-2013, 04:45 PM

Quote:

Originally Posted by Porterbuilt Street Rods

Creep, I will get back on the hinges here shortly.... been waiting for some new toys to get here before we get back to the new products. Fortunately the wait for the equipment is almost over. Waterjet shows up Monday and press brake should be here Wednesday.

Not sure what the fuss is all about... ever wonder why Dino's arms are so huge? It's from opening the hoods on all these 60-66 trucks he builds! LOL

Nate

Modges'66 · 06-14-2013, 07:49 PM

Dino, are you ...Kidding me? Does your heater control take 4 knobs?
I only have 3 right now, and thought that I would be good-to-go! but I wanna make sure that they match perfectly (lots of eyes on this build)
I gotta do some work to remedy this situation in the next few weeks, but I'll figure something out!.
...Really, I would like nothin better, than to l look at your dash and see my $htuff!...and Know that basically nobody else has it as of yet!
PM me!

bj383ss · 06-14-2013, 08:10 PM

Quote:

Originally Posted by cbeeman63

I found a picture from about 1995 right after I painted the truck. I also painted those wheels, HAHAHA!! Vintage camper shell too...

Thank you so much for this pic. Now I know what to do with my wheels until I can afford Smoothies!

Bret

zippeay · 06-17-2013, 12:27 PM

Ok wtf.... This will be 3 trucks finished before mine. I hate you

lol
Posted via Mobile Device

Dinos63 · 06-20-2013, 01:32 AM

Quote:

Originally Posted by Modges'66

Dino, are you ...Kidding me? Does your heater control take 4 knobs?
I only have 3 right now, and thought that I would be good-to-go! but I wanna make sure that they match perfectly (lots of eyes on this build)
I gotta do some work to remedy this situation in the next few weeks, but I'll figure something out!.
...Really, I would like nothin better, than to l look at your dash and see my $htuff!...and Know that basically nobody else has it as of yet!
PM me!

modges love and be stoked to have some of your work on this truck

Quote:

Originally Posted by zippeay

Ok wtf.... This will be 3 trucks finished before mine. I hate you

lol
Posted via Mobile Device

I got all my parts from nate lca/uca stretched and trailing arm cross member Joe got busy and knocked out pancaked cross member. after brothers next week we should be on the c/c dually full time I have all the parts for the chassi just need to get it sand blasted

jhrusk · 06-20-2013, 09:32 AM

lookin forward to it Dino

Dinos63 · 06-20-2013, 09:54 PM

Quote:

Originally Posted by jhrusk

lookin forward to it Dino

thanks j!
few updates the blue trucks a home and I am tight on space so I have some of my trucks and parts for the c/c dually at my shop

Dinos63 · 06-20-2013, 09:57 PM

frame will leave for sand blasting next week, and all pb stuff super nice

05-27-2013, 06:39 PM	#127
moose1008 Registered User Join Date: Sep 2012 Location: King North Carolina Posts: 95	Re: Soon to be Crewcab Dually Hey Dino just a couple of questions. First are you going with the 2" extended control arms so you dont have to use spacers like on your last dually(bad ass btw). Second question is you mentioned Nate at PB was building your trailing arms? Are the 1 ton and 1/2 ton frames the same on the inside of the c channel allowing you to use the trialing arm cross member?

05-28-2013, 02:29 PM	#128
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: Soon to be Crewcab Dually If you first don't succeed try try again but in Dino's case he succeeded the first time the second time the third time the fourth time ect ect ect........... I can't count that high I don't have enough fingers and toes, I think it breaks down to one truck build every quarter. __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

05-29-2013, 06:04 AM	#130
clemdaddy Senior Member Join Date: Oct 2009 Location: Fayetteville, Arkansas Posts: 1,923	Re: Soon to be Crewcab Dually doing some fast work out there. don't know how you keep track with multiple builds going on at once. but you do. keep'er going dude, we'll be following along. dig the wheels... hope you keep the big block...

05-29-2013, 11:18 AM	#131
cbeeman63 Registered User Join Date: Apr 2013 Location: Murrieta CA Posts: 7	Re: Soon to be Crewcab Dually Sorry I missed the One Day Build. All my plans fell apart last minute. I sold my T-Bucket project Friday to focus a little more time on my suburban and my vette! Priorities!! I really like the rendering of the CC colors look great, stance is perfect! Did you modify the trailer to haul the CC?

05-29-2013, 05:40 PM	#135
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: Soon to be Crewcab Dually forgot the pic Attached Images __________________ CHEVY ONLY... Nothin Else !

06-10-2013, 08:49 PM	#137
vegadesign Registered User Join Date: May 2012 Location: murfreesboro, TN Posts: 743	Re: Soon to be Crewcab Dually Subscribed Dying to see this build Posted via Mobile Device __________________ "its not a hobby, It's a Lifestyle" . bagged and soon to be bodied 70 longbed http://67-72chevytrucks.com/vboard/s...d.php?t=564028

06-11-2013, 01:46 AM	#138
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: Soon to be Crewcab Dually I am ready too get started also, I have the chassi ready to go the sand blaster, and I get the rest of all my suspension from nate this week. I have my new crate motor and all the air ride stuff. We should have the blue truck ready to go to brothers in a few weeks then on the dually full speed __________________ CHEVY ONLY... Nothin Else !

06-11-2013, 02:20 PM	#139
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Soon to be Crewcab Dually I am on this build. I cant wait to see it completed. __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

06-11-2013, 06:10 PM	#140
creep Registered Loser Join Date: Jun 2009 Location: Elyria, OH Posts: 1,523	Re: Soon to be Crewcab Dually Hey, while your picking up you suspension parts why don'tcha give Nate a nudge to get those dang hood strut kits out already. The wait is killin' me. This truck is gonna be what a crewcab AND a dually should be __________________ ((..)) ((0)) '63 GMC lwb, 383, th350, lays frame, genuine patina. The Build Thread - http://67-72chevytrucks.com/vboard/s...d.php?t=374267 '88 Astro cargo bagged, shaved, phantom grille. SOLD '50 Chevy 2 door sedan awaiting attention. 2014 Silverado Ext cab, 5.3, daily driver.

06-11-2013, 06:46 PM	#141
Jmorales3181 Registered User Join Date: Aug 2012 Location: Smithfield rhode island Posts: 722	Re: Soon to be Crewcab Dually Yeah I think I'm going to need some of those fancy hinges too! Can't wait to see how this one comes out. The original dually was my favorite but am really liking the blue truck and now this....hard to chose with all these awesome trucks! C-10 godfather Posted via Mobile Device __________________ My frame Layin 63 short bed project http://67-72chevytrucks.com/vboard/s...d.php?t=551353

06-14-2013, 07:49 PM	#144
Modges'66 Registered User Join Date: Feb 2012 Location: Grand Rapids, Michigan, otherwise known as Beer City U.S.A. Posts: 1,081	Re: Soon to be Crewcab Dually Dino, are you ...Kidding me? Does your heater control take 4 knobs? I only have 3 right now, and thought that I would be good-to-go! but I wanna make sure that they match perfectly (lots of eyes on this build) I gotta do some work to remedy this situation in the next few weeks, but I'll figure something out!. ...Really, I would like nothin better, than to l look at your dash and see my $htuff!...and Know that basically nobody else has it as of yet! PM me! __________________ My Build: http://67-72chevytrucks.com/vboard/s...d.php?t=512904

06-17-2013, 12:27 PM	#146
zippeay Registered User Join Date: Mar 2012 Location: Hooper Ut Posts: 466	Re: Soon to be Crewcab Dually Ok wtf.... This will be 3 trucks finished before mine. I hate you lol Posted via Mobile Device

06-20-2013, 09:32 AM	#148
jhrusk Registered User Join Date: Nov 2011 Location: mid ga Posts: 552	Re: Soon to be Crewcab Dually lookin forward to it Dino __________________ check out SANFORD build thread http://67-72chevytrucks.com/vboard/s...d.php?t=522019

06-20-2013, 09:57 PM	#150
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: Soon to be Crewcab Dually frame will leave for sand blasting next week, and all pb stuff super nice Attached Images __________________ CHEVY ONLY... Nothin Else !



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.