WI ISO/WTB GMC V6 power steering brackets and pulleys - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**schwoch1** · 03-18-2018, 12:17 PM

Looking for a set of power steering brackets and pulleys to bolt a PS pump and associated hardware to a GMC V6. My '67 has armstrong steering and the wife has expressed interest in driving the truck, but with no PS that isn't an option!
Let me know if anyone has anything of the sorts lying around!

Mike

**The Rocknrod** · 03-18-2018, 06:20 PM

Have you tried GMC Pauls? - Email- robbinspd1199@yahoo.com

**southern parts** · 03-19-2018, 08:09 AM

I think I still have the pump and brackets. I'll check after work

larry66 · 03-19-2018, 06:58 PM

I am looking for the power steering brackets and hardware for a 1966 GMC 305 V6. I think your setup would fit my truck, hope you still have these parts.
larry

duallyjams · 03-25-2018, 10:07 AM

Just an FYI 60-66 V6 pump and brackets are different then 67-69 V6 pump and brackets and there two different size pulleys also.

03-18-2018, 12:17 PM	#1
schwoch1 Local Detroit diesel nut! Join Date: Apr 2008 Location: Burlington, WI Posts: 175	ISO/WTB GMC V6 power steering brackets and pulleys Looking for a set of power steering brackets and pulleys to bolt a PS pump and associated hardware to a GMC V6. My '67 has armstrong steering and the wife has expressed interest in driving the truck, but with no PS that isn't an option! Let me know if anyone has anything of the sorts lying around! Mike __________________ Nothing cool anymore, I am old and boring....

03-18-2018, 06:20 PM	#2
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: ISO/WTB GMC V6 power steering brackets and pulleys Have you tried GMC Pauls? - Email- robbinspd1199@yahoo.com __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

03-19-2018, 08:09 AM	#3
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,469	Re: ISO/WTB GMC V6 power steering brackets and pulleys I think I still have the pump and brackets. I'll check after work

03-19-2018, 06:58 PM	#4
larry66 Registered User Join Date: Mar 2018 Location: Edmonton, Alberta Posts: 7	Re: ISO/WTB GMC V6 power steering brackets and pulleys I am looking for the power steering brackets and hardware for a 1966 GMC 305 V6. I think your setup would fit my truck, hope you still have these parts. larry

03-25-2018, 10:07 AM	#5
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: ISO/WTB GMC V6 power steering brackets and pulleys Just an FYI 60-66 V6 pump and brackets are different then 67-69 V6 pump and brackets and there two different size pulleys also. __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.