Newbie with a 65 Chevy - Page 17 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dwcardfan · 06-04-2015, 08:24 PM

Got the fender wet sanded and buffed out. Came out real nice.

dwcardfan · 06-04-2015, 08:27 PM

Yes it is a 2000 silverado seat. I bought a wrecked truck and I am using the motor,trans, and the bucket seats. I was going to use a middle jump seat out of another truck but is was a little wider than I liked. The console will fit just fine. The jump seat was about 3 inches wider.

bj383ss · 06-04-2015, 09:21 PM

Looks good. One part done!

Ta2Don · 06-04-2015, 09:44 PM

Paint...

**clemdaddy** · 06-04-2015, 09:45 PM

Quote:

Originally Posted by dwcardfan

Not been getting a lot of truck time but I did paint a door and fender. My floor light quit working after my first coat of clear and I could not see that well so I have a couple of runs to sand down and buff.
Oh well if it was easy everybody would do it.

i had a guy come apply for a job at the shop, he was supposed to be a body man. he said that its all about the prep and a monkey can be trained to paint. being the painter here, i told him that he probably wouldn't want a monkey for a boss and i showed him to the door.
painting ain't all that easy... there's a million ways to screw up and only one right. your work looks pretty darn right to me.

dwcardfan · 06-04-2015, 09:59 PM

Quote:

Originally Posted by bj383ss

Looks good. One part done!

Thanks BJ. That's the way I have to do it. One part at a time.

dwcardfan · 06-04-2015, 10:00 PM

Quote:

Originally Posted by Ta2Don

Paint...

You are almost there brother!

dwcardfan · 06-04-2015, 10:05 PM

Quote:

Originally Posted by clemdaddy

i had a guy come apply for a job at the shop, he was supposed to be a body man. he said that its all about the prep and a monkey can be trained to paint. being the painter here, i told him that he probably wouldn't want a monkey for a boss and i showed him to the door.
painting ain't all that easy... there's a million ways to screw up and only one right. your work looks pretty darn right to me.

Thanks Clem. That's a funny story. I have to make sure every thing is just right and take my time or I will mess up. Just when I think I am about to get it something like this happens. The door has a few more runs in it and I hope I can sand them out without sanding through the clear. If I do I can just shoot it again.

**TJ's Chevy** · 06-05-2015, 10:02 AM

Looks real good. I'm a likin it!

dwcardfan · 06-10-2015, 11:54 AM

Quote:

Originally Posted by TJ's Chevy

Looks real good. I'm a likin it!

Thanks TJ!
I got the door sanded and painted again. It looks nice and smooth this time. No runs.

1963c-10 · 06-10-2015, 01:23 PM

Nice job on the paint. I had to do all mine the same. One part at a time. But just down to the bed being left. Keep up the updates and great paint!!!

Ta2Don · 06-10-2015, 10:21 PM

Ooooh, Shiney!!!

dwcardfan · 06-16-2015, 06:18 PM

No truck updates. I have been on vacation with the wife to Colorado.

Ta2Don · 06-16-2015, 10:11 PM

Nice!!!

dwcardfan · 06-22-2015, 05:54 PM

Took the truck in for a new windshield!

dwcardfan · 06-22-2015, 05:58 PM

Maybe tomorrow I can get drivers door and fender on for good. I need a new gasket for my back window. The one I have is an universal and does not fit well. Does any body have a suggestion on what one to use?

Ta2Don · 06-22-2015, 10:14 PM

That's some clean glass… Looking Great Brother!!!

dwcardfan · 06-23-2015, 09:54 PM

Installed driver door seal today. And welded up the antenna hole.

**TJ's Chevy** · 06-24-2015, 10:04 AM

Looking good! New windshield reminds me of when I took Crustine get her's put in. lol

dwcardfan · 06-25-2015, 10:28 PM

Thanks guys. I had a friend stop by today and help me mount the door and fender.

dwcardfan · 06-25-2015, 10:32 PM

Another shot.

Ta2Don · 06-26-2015, 09:09 AM

Dude!!!

Lookin Sweet Brother!!! Cruise Night on the radar...

dwcardfan · 06-26-2015, 09:26 AM

Thanks man! Cruise Night!!!!!!! I am ready for that.

**TJ's Chevy** · 06-26-2015, 09:45 AM

Looks sweeet!!!

dwcardfan · 06-26-2015, 11:12 AM

Quote:

Originally Posted by TJ's Chevy

Looks sweeet!!!

Thanks TJ. Dont forget lots of pics of the show.

06-04-2015, 08:24 PM	#401
dwcardfan Registered User Join Date: Sep 2013 Location: Strawberry Arkansas Posts: 1,137	Re: Newbie with a 65 Chevy Got the fender wet sanded and buffed out. Came out real nice. Attached Images __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=605217

06-04-2015, 08:27 PM	#402
dwcardfan Registered User Join Date: Sep 2013 Location: Strawberry Arkansas Posts: 1,137	Re: Newbie with a 65 Chevy Yes it is a 2000 silverado seat. I bought a wrecked truck and I am using the motor,trans, and the bucket seats. I was going to use a middle jump seat out of another truck but is was a little wider than I liked. The console will fit just fine. The jump seat was about 3 inches wider. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=605217

06-04-2015, 09:21 PM	#403
bj383ss Registered User Join Date: Sep 2012 Location: Leander, TX Posts: 969	Re: Newbie with a 65 Chevy Looks good. One part done! __________________ 64' Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=586955

06-04-2015, 09:44 PM	#404
Ta2Don Registered User Join Date: Apr 2012 Location: Searcy, AR Posts: 4,203	Re: Newbie with a 65 Chevy Paint... __________________ DON Proverbs 27:17 US Air Force Retarded errr Retired My '65 Stepper Build:http://67-72chevytrucks.com/vboard/s...d.php?t=533920 My '60 Rusty Patina Build:http://67-72chevytrucks.com/vboard/s...66#post7402266 My '72 http://67-72chevytrucks.com/vboard/s...59#post7204359 SOLD

06-05-2015, 10:02 AM	#409
TJ's Chevy Post Whore Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: Newbie with a 65 Chevy Looks real good. I'm a likin it! __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

06-10-2015, 01:23 PM	#411
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: Newbie with a 65 Chevy Nice job on the paint. I had to do all mine the same. One part at a time. But just down to the bed being left. Keep up the updates and great paint!!! __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

06-10-2015, 10:21 PM	#412
Ta2Don Registered User Join Date: Apr 2012 Location: Searcy, AR Posts: 4,203	Re: Newbie with a 65 Chevy Ooooh, Shiney!!! __________________ DON Proverbs 27:17 US Air Force Retarded errr Retired My '65 Stepper Build:http://67-72chevytrucks.com/vboard/s...d.php?t=533920 My '60 Rusty Patina Build:http://67-72chevytrucks.com/vboard/s...66#post7402266 My '72 http://67-72chevytrucks.com/vboard/s...59#post7204359 SOLD

06-16-2015, 06:18 PM	#413
dwcardfan Registered User Join Date: Sep 2013 Location: Strawberry Arkansas Posts: 1,137	Re: Newbie with a 65 Chevy No truck updates. I have been on vacation with the wife to Colorado. Attached Images __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=605217

06-16-2015, 10:11 PM	#414
Ta2Don Registered User Join Date: Apr 2012 Location: Searcy, AR Posts: 4,203	Re: Newbie with a 65 Chevy Nice!!! __________________ DON Proverbs 27:17 US Air Force Retarded errr Retired My '65 Stepper Build:http://67-72chevytrucks.com/vboard/s...d.php?t=533920 My '60 Rusty Patina Build:http://67-72chevytrucks.com/vboard/s...66#post7402266 My '72 http://67-72chevytrucks.com/vboard/s...59#post7204359 SOLD

06-22-2015, 05:54 PM	#415
dwcardfan Registered User Join Date: Sep 2013 Location: Strawberry Arkansas Posts: 1,137	Re: Newbie with a 65 Chevy Took the truck in for a new windshield! Attached Images __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=605217

06-22-2015, 05:58 PM	#416
dwcardfan Registered User Join Date: Sep 2013 Location: Strawberry Arkansas Posts: 1,137	Re: Newbie with a 65 Chevy Maybe tomorrow I can get drivers door and fender on for good. I need a new gasket for my back window. The one I have is an universal and does not fit well. Does any body have a suggestion on what one to use? __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=605217

06-22-2015, 10:14 PM	#417
Ta2Don Registered User Join Date: Apr 2012 Location: Searcy, AR Posts: 4,203	Re: Newbie with a 65 Chevy That's some clean glass… Looking Great Brother!!! __________________ DON Proverbs 27:17 US Air Force Retarded errr Retired My '65 Stepper Build:http://67-72chevytrucks.com/vboard/s...d.php?t=533920 My '60 Rusty Patina Build:http://67-72chevytrucks.com/vboard/s...66#post7402266 My '72 http://67-72chevytrucks.com/vboard/s...59#post7204359 SOLD

06-23-2015, 09:54 PM	#418
dwcardfan Registered User Join Date: Sep 2013 Location: Strawberry Arkansas Posts: 1,137	Re: Newbie with a 65 Chevy Installed driver door seal today. And welded up the antenna hole. Attached Images __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=605217

06-24-2015, 10:04 AM	#419
TJ's Chevy Post Whore Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: Newbie with a 65 Chevy Looking good! New windshield reminds me of when I took Crustine get her's put in. lol __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

06-25-2015, 10:28 PM	#420
dwcardfan Registered User Join Date: Sep 2013 Location: Strawberry Arkansas Posts: 1,137	Re: Newbie with a 65 Chevy Thanks guys. I had a friend stop by today and help me mount the door and fender. Attached Images __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=605217



Register or Log In To remove these advertisements.

06-25-2015, 10:32 PM	#421
dwcardfan Registered User Join Date: Sep 2013 Location: Strawberry Arkansas Posts: 1,137	Re: Newbie with a 65 Chevy Another shot. Attached Images __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=605217

06-26-2015, 09:09 AM	#422
Ta2Don Registered User Join Date: Apr 2012 Location: Searcy, AR Posts: 4,203	Re: Newbie with a 65 Chevy Dude!!! Lookin Sweet Brother!!! Cruise Night on the radar... __________________ DON Proverbs 27:17 US Air Force Retarded errr Retired My '65 Stepper Build:http://67-72chevytrucks.com/vboard/s...d.php?t=533920 My '60 Rusty Patina Build:http://67-72chevytrucks.com/vboard/s...66#post7402266 My '72 http://67-72chevytrucks.com/vboard/s...59#post7204359 SOLD

06-26-2015, 09:26 AM	#423
dwcardfan Registered User Join Date: Sep 2013 Location: Strawberry Arkansas Posts: 1,137	Re: Newbie with a 65 Chevy Thanks man! Cruise Night!!!!!!! I am ready for that. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=605217

06-26-2015, 09:45 AM	#424
TJ's Chevy Post Whore Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: Newbie with a 65 Chevy Looks sweeet!!! __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

Register or Log In To remove these advertisements.