The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-13-2012, 01:12 PM   #76
j.kirn
Registered User
 
Join Date: Jun 2006
Location: MO.
Posts: 970
Re: All about heaters.

Quote:
Originally Posted by j.kirn View Post
I have a complete NOS deluxe 1 in box i will have to post pics when i get a chance to get to it
j.kirn is offline   Reply With Quote
Old 03-13-2012, 02:08 PM   #77
1963c-10
Registered User
 
1963c-10's Avatar
 
Join Date: Nov 2011
Location: fayetteville nc
Posts: 10,338
Re: All about heaters.

Quote:
Originally Posted by ABX131 View Post
I was told using a blower motor out of a suburban that has rear air and heat vents in an earlier truck, like my 63' will give you a ton of force through the shorter ductwork...the motors should be interchangeable.
Thats a great idea
__________________
1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual
http://67-72chevytrucks.com/vboard/s...d.php?t=519869
1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide
http://67-72chevytrucks.com/vboard/s...d.php?t=619024
1964 Short bed trailer
1963c-10 is offline   Reply With Quote
Old 03-13-2012, 08:58 PM   #78
tc64
Registered User
 
tc64's Avatar
 
Join Date: Jan 2012
Location: gold country,ca
Posts: 134
Re: All about heaters.

mine is a deluxe with that outside control arm missing.without this thread i never would have figured it out.
tc64 is offline   Reply With Quote
Old 07-02-2012, 03:35 AM   #79
LostMy65
But Found Her 25yrs Later!
 
LostMy65's Avatar
 
Join Date: Oct 2010
Location: Oregon City, Oregon
Posts: 10,457
Re: All about heaters.

Quote:
Originally Posted by Rich 5150 69 View Post

When Bubba327 changed out his heater core for the larger core he had to open up his upper lid the accomidate the larger core, as shown in the pic above....my upper section is already larger/factory but has a notch in it for a block off plate, I`m assumming that this would be a later design as to cut costs one box fits all...? I ended up with a smaller core only because I could`nt find a larger core locally, made a quick plate from alumimun. Anybody have pics as to how the factory hung the core in the box.....?
I opened mine up today.
Somebody put the smaller core in mine and left the rest wide open.
I guess I could make a plate like like you did.
__________________
I lost my 65 - Found it 25 years later:
http://67-72chevytrucks.com/vboard/s...d.php?t=426650

66 C20 Service Truck:
http://67-72chevytrucks.com/vboard/s...d.php?t=428035
LostMy65 is offline   Reply With Quote
Old 07-22-2012, 08:27 PM   #80
jbgroby
Registered User
 
jbgroby's Avatar
 
Join Date: Nov 2008
Location: Lacombe, LA
Posts: 2,768
Re: All about heaters.

Ok I have something to ad to the thread that is a bit puzzling. I decided to take the heater box apart and start the dry fit to see what core I might need. I have a "large" core with the Ranco valve, have not decided as of yet whether I'm going to keep this set up or not and just go with a hand turn valve under the hood. I a bit of a purest so I'm torn between the OEM look and less aggravation.

I took the top off of the box and discovered that although the firewall has the proper hole in it for a the control cable to pass, the deluxe heater box does not? I snapped some pictures of everything for the record and everyone’s reference. I also took pictures of the core with the Ranco valve in situ, to see how it all lines up. It seems to fit well and I’m hoping that the core and Ranco valve will be usable. I bought the valve off eBay about 3 years back. IF this core is no go I’ll probably go with a match and will need to modify the top of the heater box I believe, based on other pictures I’ve seen.

I have not figured out what the large hole in front is for just yet, any Ideas?

Let me know what you fine folks think.
Attached Images
     
jbgroby is offline   Reply With Quote
Old 07-23-2012, 01:08 AM   #81
piratexpress1369a
Registered User
 
piratexpress1369a's Avatar
 
Join Date: Jun 2012
Location: Selkirk Ontario Canada
Posts: 1,141
Re: All about heaters.

this is great info
__________________
My 63 GMC Panel Slow Build

http://67-72chevytrucks.com/vboard/s...=1#post5457281
63
piratexpress1369a is offline   Reply With Quote
Old 07-28-2012, 10:13 AM   #82
jbgroby
Registered User
 
jbgroby's Avatar
 
Join Date: Nov 2008
Location: Lacombe, LA
Posts: 2,768
Re: All about heaters.

Ok Update. Rad shop said that core has holes and it would be about 300 to patch it right. Sorry I can't justiify that much money on something with and 'Out-of-Sight' warrenty (As soon as you're out of sight, it's out of warrenty).

I need to by after market. Based on my measurements I 'believe' it will be part number (32-2509 from LMC $70.00 with trade in. I'm going to call them and see if we can match it up..
jbgroby is offline   Reply With Quote
Old 07-31-2012, 03:22 PM   #83
jbgroby
Registered User
 
jbgroby's Avatar
 
Join Date: Nov 2008
Location: Lacombe, LA
Posts: 2,768
Re: All about heaters.

Ok I called LMC to inquire about the “deluxe” heater core (part number 32-2510)

http://www.lmctruck.com/icatalog/cbe/full.aspx?Page=31

I was hoping to see a picture vs. a drawing. Sure enough they had a picture on file and sent it me (below). I’m going to order this one and install with an external valve to control water flow. I don’t want to do this, but as the cost to fix the little holes will run $300, it just does not make since to invest this when living in New Orleans, LA. I won’t use the heater all that often and if needed, I’ll just twist a valve open.

I’ll probably need to modify the top of the heater box.

Jake
Attached Images
 
jbgroby is offline   Reply With Quote
Old 08-01-2012, 06:04 PM   #84
GWs62
Registered User
 
GWs62's Avatar
 
Join Date: Mar 2012
Location: portland, OR
Posts: 56
Re: All about heaters.

You will indeed have to modify the cover as I've learned w/ my '62 deluxe. After much research and returning cores that did not match my original, I concluded that there is no aftermarket that will match; so I reordered from LMC and cut a new hole in the cover and will eventually patch the lower hole. The real challenge will be cutting the top cover to accomodate the upper tube.
Attached Images
   
__________________
When was the last time you did something for the first time?


We never really grow up, we only learn how to act in public.
GWs62 is offline   Reply With Quote
Old 08-03-2012, 02:40 PM   #85
jbgroby
Registered User
 
jbgroby's Avatar
 
Join Date: Nov 2008
Location: Lacombe, LA
Posts: 2,768
Re: All about heaters.

Thanks that is what I needed to see. How did you end up popping the hold in; with a punch or just rough cut?
jbgroby is offline   Reply With Quote
Old 08-08-2012, 04:12 PM   #86
GWs62
Registered User
 
GWs62's Avatar
 
Join Date: Mar 2012
Location: portland, OR
Posts: 56
Re: All about heaters.

Just used a cone shaped burr w/ 1/4" shank. Makes it nice & clean.
__________________
When was the last time you did something for the first time?


We never really grow up, we only learn how to act in public.
GWs62 is offline   Reply With Quote
Old 08-09-2012, 01:38 PM   #87
6T6
Registered User
 
6T6's Avatar
 
Join Date: Jul 2012
Location: SE AK
Posts: 40
Re: All about heaters.

Replaced my heater blower motor and discovered that the last person to work on it only re-installed 3 of the 5 screws. There was also 2 missing from the heater core cover.

This has probably been done by alot of guys but thought I would post here anyway........

Went to the hardware store and a couple auto parts stores and could not find the right screws so what I ended uop doing is buying some Stainless Steel self tappers in the right size and ground the tip off. Looks really close to OEM and will hold up much better in this climate.

TC
Attached Images
  
__________________
My other Chevy Truck is a 2004 2500HD 4X4 with an 8.1L (496cid) and Allison T1000 (5spd Auto)

1966 C20 DD Build

6T6 is offline   Reply With Quote
Old 12-04-2012, 11:29 AM   #88
Corts60
Just here to tinker
 
Corts60's Avatar
 
Join Date: Jun 2008
Location: Holland, MI
Posts: 3,672
Re: All about heaters.

Ok, thought I would mention that the 60-63 metal defrost vents are not integral to the dash, the bolts are underneath the windshield seal and I'm pretty sure are impossible to get at with removing the windshield.
Posted via Mobile Device
Corts60 is offline   Reply With Quote
Old 12-04-2012, 11:39 PM   #89
Bigffjoe
Registered User
 
Bigffjoe's Avatar
 
Join Date: Nov 2012
Location: Sandy, Oregon
Posts: 86
Re: All about heaters.

Here is a pic of my 61 suburban.



Great thread!

Thank you markeb01 for pictures of you manuals... helped me figure out where the plug from the fan switch to the fan motor needs to go. I thought something was missing on my rig, looks like there is a spot on the back of the unit in the cab to plug it onto. Might be why my fan is either on or off out of the 4 positions. After plugged in, maybe the fan will have off and then 3 speeds.

Great picture of the auxiliary heater for the suburban aerotruk63, I would love that in mine to warm up the larger space in my suburban. It get kinda chilly in Sandy Oregon.
__________________
Joe.
1961 K14 Suburban 4x4
My suburban build thread. http://67-72chevytrucks.com/vboard/s...d.php?t=555159
CList stuff. http://67-72chevytrucks.com/vboard/s...=428759&page=7
Bigffjoe is offline   Reply With Quote
Old 12-05-2012, 07:23 AM   #90
Hx16457
Registered User
 
Hx16457's Avatar
 
Join Date: Sep 2012
Location: Lawton Oklahoma
Posts: 308
Re: All about heaters.

Ordered a new 64-66 blower motor,
Question;
Why is there a 1in hole in the side of the new motor housing?
The old one did not have this hole.
Looks like I will now need a rubber plug to cover this hole....
Posted via Mobile Device
__________________
People who make excuses didn't want to do it in the first place!
http://s1326.photobucket.com/albums/...cpZZ1QQtppZZ16
Hx16457 is offline   Reply With Quote
Old 12-05-2012, 09:21 AM   #91
1963c-10
Registered User
 
1963c-10's Avatar
 
Join Date: Nov 2011
Location: fayetteville nc
Posts: 10,338
Re: All about heaters.

Quote:
Originally Posted by jbgroby View Post
Ok Update. Rad shop said that core has holes and it would be about 300 to patch it right. Sorry I can't justiify that much money on something with and 'Out-of-Sight' warrenty (As soon as you're out of sight, it's out of warrenty).

I need to by after market. Based on my measurements I 'believe' it will be part number (32-2509 from LMC $70.00 with trade in. I'm going to call them and see if we can match it up..
I ran into the same problem w/my 63 deluxe w/ranco valve. Take the off the shelf deluxe core and your oem core to your local shop. Have them, swap the oem tanks to your new core. Cost around $60 and you will not have to modify anything on the heater box or lid.
__________________
1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual
http://67-72chevytrucks.com/vboard/s...d.php?t=519869
1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide
http://67-72chevytrucks.com/vboard/s...d.php?t=619024
1964 Short bed trailer
1963c-10 is offline   Reply With Quote
Old 12-05-2012, 03:16 PM   #92
QBA
Proud Americano
 
Join Date: May 2008
Location: CORONA,CA
Posts: 98
Re: All about heaters.

it should be for a breather hose.for other applications.mine came with a plug and instructions explaning if I needed it or not
__________________
Tattooed Cuban Trailer Trash.
putting the cart before the horse since 1964.
QBA is offline   Reply With Quote
Old 12-05-2012, 07:12 PM   #93
Hx16457
Registered User
 
Hx16457's Avatar
 
Join Date: Sep 2012
Location: Lawton Oklahoma
Posts: 308
Re: All about heaters.

Any ideas where to find this breather?
Posted via Mobile Device
__________________
People who make excuses didn't want to do it in the first place!
http://s1326.photobucket.com/albums/...cpZZ1QQtppZZ16
Hx16457 is offline   Reply With Quote
Old 12-05-2012, 07:34 PM   #94
QBA
Proud Americano
 
Join Date: May 2008
Location: CORONA,CA
Posts: 98
Re: All about heaters.

you don't really need the hose,a rubber plug will sufice.
I know that gm cars with tight and enclosed areas like the fiero had them.

search heater motor,there is a post some one had showing the hose.

hope this helps
__________________
Tattooed Cuban Trailer Trash.
putting the cart before the horse since 1964.
QBA is offline   Reply With Quote
Old 12-05-2012, 08:38 PM   #95
Hx16457
Registered User
 
Hx16457's Avatar
 
Join Date: Sep 2012
Location: Lawton Oklahoma
Posts: 308
Re: All about heaters.

Okay I found a plug for it thanks, though maybe this motor might need the breather!
But you say no so a plug is what I used!
Thx
Posted via Mobile Device
__________________
People who make excuses didn't want to do it in the first place!
http://s1326.photobucket.com/albums/...cpZZ1QQtppZZ16
Hx16457 is offline   Reply With Quote
Old 12-07-2012, 11:37 PM   #96
LostMy65
But Found Her 25yrs Later!
 
LostMy65's Avatar
 
Join Date: Oct 2010
Location: Oregon City, Oregon
Posts: 10,457
Re: All about heaters.

What's the purpose of this part I've circled?:

Posted via Mobile Device
__________________
I lost my 65 - Found it 25 years later:
http://67-72chevytrucks.com/vboard/s...d.php?t=426650

66 C20 Service Truck:
http://67-72chevytrucks.com/vboard/s...d.php?t=428035
LostMy65 is offline   Reply With Quote
Old 12-08-2012, 01:47 PM   #97
61K10
Registered User
 
61K10's Avatar
 
Join Date: Feb 2012
Location: pleasant valley--placerville ca
Posts: 3,039
Re: All about heaters.

how about after-market knobs on a 61. bought new ones as i was missing one. the new ones don't have the metal insert to hold it on the lever. what do you do to to make them stay on?
__________________
1961 chevy K10

my build is------------61K10 build
61K10 is offline   Reply With Quote
Old 12-08-2012, 04:37 PM   #98
jonzcustomshop
1961 crewcab
 
jonzcustomshop's Avatar
 
Join Date: Dec 2007
Location: missoula, mt
Posts: 6,164
Re: All about heaters.

Quote:
Originally Posted by LostMy65 View Post
What's the purpose of this part I've circled?:

Posted via Mobile Device
that shold just help route the defrost ductwork
jonzcustomshop is offline   Reply With Quote
Old 12-09-2012, 02:30 AM   #99
Bigffjoe
Registered User
 
Bigffjoe's Avatar
 
Join Date: Nov 2012
Location: Sandy, Oregon
Posts: 86
Re: All about heaters.

I almost bought some of the new heater knobs too, I thought they would come with the clips.
__________________
Joe.
1961 K14 Suburban 4x4
My suburban build thread. http://67-72chevytrucks.com/vboard/s...d.php?t=555159
CList stuff. http://67-72chevytrucks.com/vboard/s...=428759&page=7
Bigffjoe is offline   Reply With Quote
Old 12-09-2012, 01:22 PM   #100
61K10
Registered User
 
61K10's Avatar
 
Join Date: Feb 2012
Location: pleasant valley--placerville ca
Posts: 3,039
Re: All about heaters.

I thank 64-66 are different in how they slide on the levers. levers have like teeth, but not the 60-63? 62?
__________________
1961 chevy K10

my build is------------61K10 build
61K10 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:21 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com