What is a good sound deadner 56 chevy truck - The 1947 - Present Chevrolet & GMC Truck Message Board Network

JumboAMONGus · 03-17-2012, 05:03 PM

iam searching for sound deadner my original mats were so crumbly they were almost gone ,, i have the original cardboard top section but looking for something on floor im running flowmaster 40 series 2 1/12 exhaust and gets annoying with no carpet in it , i seen peace maker fatmat and a few others and also who makes a good qaulity carpet that fits real good , along the doors and goes all the way back to where tank is ? thanks for any info

Summabish · 03-18-2012, 09:12 AM

I've heard a lot of good stuff about Fatmat, I'm looking into purchasing some rattle trap fatmat for my 2000 for sound deadner, if it works good I'll use it in my project/playtoy.

LakeAnna · 03-18-2012, 10:12 AM

I just picked up two gallons of the liquid fat mat to do my 72. I'll let you know how it goes... I plan to spray if on Tuesday.

**N2TRUX** · 03-18-2012, 10:52 AM

These days a common practice is to take a two step approach. Take a look at Lizard Skin flr a spray in thermal barrier. Follow that with Brown Bread or Fatmat to reduce harmonics and sound levels

fastwillie 696969 · 03-18-2012, 07:47 PM

i keep the wife out of the truck and its real quite now

JumboAMONGus · 03-18-2012, 11:11 PM

yeah i have a 71 chevy truck to ill take a look at the fatman i never new they were a spray on , pretty cool ,,

H.I. · 05-24-2012, 07:46 AM

I just did my 53 with hushmat. It's awesome! It's a peel and stick then you run a hard wheel roller over it (paper paper edge roller from local paint store). I can't believe the difference. I put it on my floor, back panel, and inside the doors. First hour drive last weekend was amazing the difference in noise reduction in the cab and reduced the heat greatly! I'd highly recommend it.
Posted via Mobile Device

Rochlow · 05-24-2012, 01:46 PM

http://67-72chevytrucks.com/vboard/s...d.php?t=511370

I plan on doing this.. Dynamat, fat mat, lizardskin to be too expensive in my opinion.

**special-K** · 05-28-2012, 06:06 PM

All this info would also apply to pre-47 trucks. Very informative thread.

ETsC10 · 05-28-2012, 09:11 PM

I've been using Second Skin Dampifier for several years and am currently
testing Hy-Tech SC#1000 (gift from Livrat

) on my car.
I did the entire floor board thickly, firewall to rear deck, with about 1 1/2 cups of coating
with a chip brush. Very easy and quick.

Under the coating is Hammerite (what I had on hand) over strips of the dampifier & rust hole patches.
When I drove the car last night I could hear the difference after coating.
This car has ZERO interior...one bucket seat, one seat belt and is normally loud.

Also ordered just the spheres on ebay a couple days ago...1 pint for a total of about 10 bucks.
Plans are to mix some spheres into Rustoleum for a truck floor.

Jeff56 · 07-21-2012, 02:03 PM

I think my problem is the pic of my truck is on my cell phone so its not letting me upload it. Or I just don't know how
Posted via Mobile Device

03-18-2012, 09:12 AM	#2
Summabish Registered User Join Date: Jun 2011 Location: Chesapeake Posts: 74	Re: What is a good sound deadner 56 chevy truck I've heard a lot of good stuff about Fatmat, I'm looking into purchasing some rattle trap fatmat for my 2000 for sound deadner, if it works good I'll use it in my project/playtoy.

03-18-2012, 10:12 AM	#3
LakeAnna Registered User Join Date: Oct 2011 Location: Virginia Posts: 599	Re: What is a good sound deadner 56 chevy truck I just picked up two gallons of the liquid fat mat to do my 72. I'll let you know how it goes... I plan to spray if on Tuesday. __________________ Chris *72 RESTO* http://67-72chevytrucks.com/vboard/s...d.php?t=501870

03-18-2012, 10:52 AM	#4
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: What is a good sound deadner 56 chevy truck These days a common practice is to take a two step approach. Take a look at Lizard Skin flr a spray in thermal barrier. Follow that with Brown Bread or Fatmat to reduce harmonics and sound levels __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

03-18-2012, 07:47 PM	#5
fastwillie 696969 ~Rest In Peace~ Join Date: May 2005 Location: CALIFORNIA NOR CAL Posts: 9,707	Re: What is a good sound deadner 56 chevy truck i keep the wife out of the truck and its real quite now __________________ is it fast ? it has a lighting bolt donut? B___H please, I can remove 90% of your so called "beauty" with a kleenex

03-18-2012, 11:11 PM	#6
JumboAMONGus Registered User Join Date: Jun 2010 Location: WA. Posts: 436	Re: What is a good sound deadner 56 chevy truck yeah i have a 71 chevy truck to ill take a look at the fatman i never new they were a spray on , pretty cool ,,

03-17-2012, 05:03 PM	#1
JumboAMONGus Registered User Join Date: Jun 2010 Location: WA. Posts: 436	What is a good sound deadner 56 chevy truck iam searching for sound deadner my original mats were so crumbly they were almost gone ,, i have the original cardboard top section but looking for something on floor im running flowmaster 40 series 2 1/12 exhaust and gets annoying with no carpet in it , i seen peace maker fatmat and a few others and also who makes a good qaulity carpet that fits real good , along the doors and goes all the way back to where tank is ? thanks for any info

05-24-2012, 07:46 AM	#7
H.I. Registered User Join Date: Sep 2010 Location: Allen, TX Posts: 43	Re: What is a good sound deadner 56 chevy truck I just did my 53 with hushmat. It's awesome! It's a peel and stick then you run a hard wheel roller over it (paper paper edge roller from local paint store). I can't believe the difference. I put it on my floor, back panel, and inside the doors. First hour drive last weekend was amazing the difference in noise reduction in the cab and reduced the heat greatly! I'd highly recommend it. Posted via Mobile Device __________________ H.I. 1953 Chevy 1/2-ton 5 window with 235 ci straight 6, dual fenton headers, dual offy intake with 2x1s. 3" dropped axle w 3 leafs removed front, 3" blocks in rear with 2 leafs removed, T5 Camaro/S10 hybrid transmission

05-24-2012, 01:46 PM	#8
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: What is a good sound deadner 56 chevy truck http://67-72chevytrucks.com/vboard/s...d.php?t=511370 I plan on doing this.. Dynamat, fat mat, lizardskin to be too expensive in my opinion.

05-28-2012, 06:06 PM	#9
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: What is a good sound deadner 56 chevy truck All this info would also apply to pre-47 trucks. Very informative thread. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

05-28-2012, 09:11 PM	#10
ETsC10 Hand Crafted C-10 Join Date: Aug 2006 Location: Burien, WA Posts: 5,180	Re: What is a good sound deadner 56 chevy truck I've been using Second Skin Dampifier for several years and am currently testing Hy-Tech SC#1000 (gift from Livrat ) on my car. I did the entire floor board thickly, firewall to rear deck, with about 1 1/2 cups of coating with a chip brush. Very easy and quick. Under the coating is Hammerite (what I had on hand) over strips of the dampifier & rust hole patches. When I drove the car last night I could hear the difference after coating. This car has ZERO interior...one bucket seat, one seat belt and is normally loud. Also ordered just the spheres on ebay a couple days ago...1 pint for a total of about 10 bucks. Plans are to mix some spheres into Rustoleum for a truck floor. __________________ . Forum Guidelines and Rules Buying and Selling Code of Conduct Become a Board Supporter! Truck FAQ Ellen... the boards artsy-fartsy, eclectic, truck-lovin' gal-member...

07-21-2012, 02:03 PM	#11
Jeff56 Registered User Join Date: Feb 2012 Location: Bakersfield ca. Posts: 76	Re: What is a good sound deadner 56 chevy truck I think my problem is the pic of my truck is on my cell phone so its not letting me upload it. Or I just don't know how Posted via Mobile Device



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.