My first build - 67 GMC small window stepper - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

naphtali5725 · 05-22-2012, 09:48 PM

got a DA sander, getting things together for more work

naphtali5725 · 05-23-2012, 08:36 AM

Who makes the best quality repair panels for the 67-72 trucks? Fenders, cab corners, etc. etc. ??

Kind regards

naphtali5725 · 05-23-2012, 10:12 PM

I got all the parts together for my engine rebuild.
All parts will be replaced.

All performance machine and head work, including assembly will be done by Oldsmobile specialist Mark Smith (smitty) at http://www.mjproformance.com/

Check him out on www.realoldspower.com smitty275

Oldsmobile 455
Silv-o-Lite 1631+.030 Pistons 10.25:1 compression
Melling M-22FHV Oil Pump
Melling 22-FHVS Oil Pump Pick-up
Melling IS-22F Intermediate Oil Pump Drive Shaft
Melling 3-494SD Timing chain and gears set
Melling MPE-124BR Expansion plug kit
SBI VL49 Hydraulic Lifters
Pioneer R-396-4 Rocker Arms
Clevite SH-1354S Cam Bearings set
Clevite MS-804 P10 .010 Main Bearings Set
Clevite CB-542 P-10(8) .010 Rod Bearings set
Hastings 2M 661 030 Piston Ring Set
Enginetech S2886 Valve Seals
Rear Main seal
Fel-Pro EIS 2010 PT Engine Gasket Set
Fel-Pro MS 96015 Intake Gasket Set

Camshaft will be provided by Smitty

kind regards

Tinkermc · 05-30-2012, 03:33 PM

looks like a good truck to start with, thanks 4 the pics

naphtali5725 · 05-30-2012, 05:02 PM

Quote:

Originally Posted by Tinkermc

looks like a good truck to start with, thanks 4 the pics

Thanks Tinkermc! I am in the process of having my engine built, and I am looking into finding a good manual trans that will handle 510+ ft. lbs of torque! Hopefully I'll be able to find a Tremec TKO, spec-25, or a good muncie.

Kind regards

tsali39 · 05-30-2012, 08:25 PM

Quote:

Originally Posted by naphtali5725

Thanks! How far is Spencer from Asheville?

About two and a half hours! We love Asheville!

naphtali5725 · 05-30-2012, 09:00 PM

Quote:

Originally Posted by tsali39

About two and a half hours! We love Asheville!

Yeah man, I love it too! I'm about 25 minutes south of it, great place !

kind regards

NewType72 · 05-30-2012, 09:16 PM

man what a perfect place to start a full off resto if you didn't drive it before it's much easier to let it sit until finished haha will be following this

tsali39 · 05-31-2012, 09:48 AM

Quote:

Originally Posted by naphtali5725

Did some more dis-assembly tonite, made some progress inside, dash out, heater core, etc.

My airbox looks just like this one!

naphtali5725 · 05-31-2012, 09:52 AM

Quote:

Originally Posted by tsali39

My airbox looks just like this one!

Mine had a mouse nest, as well as bumble bees in it, crazy what will take up in a truck that has sat out in a field for a few years...

naphtali5725 · 05-31-2012, 09:56 AM

Waiting to hear from porter built on some suspension pieces for my truck, I'm pretty sure I'll be changing the rear suspension from leaf spring to track bar style. I'll probably swap in the whole front crossmember from my 86 C10 Silverado, so i'll have disc brake and power steering.

tsali39 · 05-31-2012, 10:37 AM

Quote:

Originally Posted by naphtali5725

Mine had a mouse nest, as well as bumble bees in it, crazy what will take up in a truck that has sat out in a field for a few years...

Do you have any photos of the truck as you found it in the field?

naphtali5725 · 05-31-2012, 10:46 AM

Quote:

Originally Posted by tsali39

Do you have any photos of the truck as you found it in the field?

Here it was

it was pulled forward out from under the brush a little in these shots...

tsali39 · 05-31-2012, 10:48 AM

Nice find. That truck has a great color! Thanks for sharing!

naphtali5725 · 05-31-2012, 10:55 AM

Quote:

Originally Posted by tsali39

Nice find. That truck has a great color! Thanks for sharing!

it's a factory GMC color... palomino tan

72SWBChevy · 05-31-2012, 11:47 AM

Nice truck to start a build with!!

naphtali5725 · 06-10-2012, 12:01 AM

Lots of progress on dis-assembly...

lots of pics

naphtali5725 · 06-10-2012, 12:02 AM

more

naphtali5725 · 06-10-2012, 12:04 AM

more....

naphtali5725 · 06-10-2012, 12:06 AM

more.....

naphtali5725 · 06-10-2012, 12:08 AM

lots of dis-assembly done...pretty busy

naphtali5725 · 06-10-2012, 12:09 AM

more teardown

naphtali5725 · 06-10-2012, 12:11 AM

keeping busy, teardown almost done

NewType72 · 06-10-2012, 02:17 AM

Man that is quite the disassembly looks like it was blown apart after

Posted via Mobile Device

naphtali5725 · 06-10-2012, 09:57 AM

Quote:

Originally Posted by NewType72

Man that is quite the disassembly looks like it was blown apart after

Posted via Mobile Device

yeah i was on it after i got my a-frame/hoist built.

now i wish it would go back together as fast

05-22-2012, 09:48 PM	#26
naphtali5725 Registered User Join Date: Mar 2012 Location: NC Posts: 1,101	Re: My first build - 67 GMC small window stepper got a DA sander, getting things together for more work Attached Images __________________ My build thread... http://67-72chevytrucks.com/vboard/s...d.php?t=515829 Disabled Veteran 82nd Airborne Division Operations: Desert Shield, Desert Storm, and Uphold Democracy

05-23-2012, 08:36 AM	#27
naphtali5725 Registered User Join Date: Mar 2012 Location: NC Posts: 1,101	Re: My first build - 67 GMC small window stepper Who makes the best quality repair panels for the 67-72 trucks? Fenders, cab corners, etc. etc. ?? Kind regards __________________ My build thread... http://67-72chevytrucks.com/vboard/s...d.php?t=515829 Disabled Veteran 82nd Airborne Division Operations: Desert Shield, Desert Storm, and Uphold Democracy

05-23-2012, 10:12 PM	#28
naphtali5725 Registered User Join Date: Mar 2012 Location: NC Posts: 1,101	Re: My first build - 67 GMC small window stepper I got all the parts together for my engine rebuild. All parts will be replaced. All performance machine and head work, including assembly will be done by Oldsmobile specialist Mark Smith (smitty) at http://www.mjproformance.com/ Check him out on www.realoldspower.com smitty275 Oldsmobile 455 Silv-o-Lite 1631+.030 Pistons 10.25:1 compression Melling M-22FHV Oil Pump Melling 22-FHVS Oil Pump Pick-up Melling IS-22F Intermediate Oil Pump Drive Shaft Melling 3-494SD Timing chain and gears set Melling MPE-124BR Expansion plug kit SBI VL49 Hydraulic Lifters Pioneer R-396-4 Rocker Arms Clevite SH-1354S Cam Bearings set Clevite MS-804 P10 .010 Main Bearings Set Clevite CB-542 P-10(8) .010 Rod Bearings set Hastings 2M 661 030 Piston Ring Set Enginetech S2886 Valve Seals Rear Main seal Fel-Pro EIS 2010 PT Engine Gasket Set Fel-Pro MS 96015 Intake Gasket Set Camshaft will be provided by Smitty kind regards __________________ My build thread... http://67-72chevytrucks.com/vboard/s...d.php?t=515829 Disabled Veteran 82nd Airborne Division Operations: Desert Shield, Desert Storm, and Uphold Democracy

05-30-2012, 03:33 PM	#29
Tinkermc Registered User Join Date: Jul 2011 Location: Farmville, Va Posts: 3,027	Re: My first build - 67 GMC small window stepper looks like a good truck to start with, thanks 4 the pics

05-30-2012, 09:16 PM	#33
NewType72 Registered User Join Date: Feb 2012 Location: turlock Posts: 2,177	Re: My first build - 67 GMC small window stepper man what a perfect place to start a full off resto if you didn't drive it before it's much easier to let it sit until finished haha will be following this __________________ Project NewType 1972 Chevy C/10 Cheyenne Super ( Daily Driven Showtruck ) http://67-72chevytrucks.com/vboard/s...d.php?t=507903 Project Great Grandpa's Legacy 1973 Chevy C/10 Cheyenne ( Current daily driver collecting big time parts ) http://67-72chevytrucks.com/vboard/s...89#post7084289 - Dylan (209)-985-7721

05-31-2012, 09:56 AM	#36
naphtali5725 Registered User Join Date: Mar 2012 Location: NC Posts: 1,101	Re: My first build - 67 GMC small window stepper Waiting to hear from porter built on some suspension pieces for my truck, I'm pretty sure I'll be changing the rear suspension from leaf spring to track bar style. I'll probably swap in the whole front crossmember from my 86 C10 Silverado, so i'll have disc brake and power steering. __________________ My build thread... http://67-72chevytrucks.com/vboard/s...d.php?t=515829 Disabled Veteran 82nd Airborne Division Operations: Desert Shield, Desert Storm, and Uphold Democracy Last edited by old Rusty C10; 03-30-2013 at 06:50 PM.

05-31-2012, 10:48 AM	#39
tsali39 Registered User Join Date: Apr 2012 Location: Yadkin Valley North Carolina Posts: 238	Re: My first build - 67 GMC small window stepper Nice find. That truck has a great color! Thanks for sharing!

05-31-2012, 11:47 AM	#41
72SWBChevy Registered User Join Date: Jun 2004 Location: Houston Tx Posts: 753	Re: My first build - 67 GMC small window stepper Nice truck to start a build with!! __________________ 1977 Camaro 468 BBC - SOLD - 1972 Chevy SWB....in the works!! 2006 Crew Cab Dmax/Allison Summit White-SOLD- 2009 Toyota Tacoma V6 Pre Runner - daily driver - my build thread -http://67-72chevytrucks.com/vboard/s...95#post4774595

06-10-2012, 12:01 AM	#42
naphtali5725 Registered User Join Date: Mar 2012 Location: NC Posts: 1,101	Re: My first build - 67 GMC small window stepper Lots of progress on dis-assembly... lots of pics Attached Images __________________ My build thread... http://67-72chevytrucks.com/vboard/s...d.php?t=515829 Disabled Veteran 82nd Airborne Division Operations: Desert Shield, Desert Storm, and Uphold Democracy

06-10-2012, 12:02 AM	#43
naphtali5725 Registered User Join Date: Mar 2012 Location: NC Posts: 1,101	Re: My first build - 67 GMC small window stepper more Attached Images __________________ My build thread... http://67-72chevytrucks.com/vboard/s...d.php?t=515829 Disabled Veteran 82nd Airborne Division Operations: Desert Shield, Desert Storm, and Uphold Democracy

06-10-2012, 12:04 AM	#44
naphtali5725 Registered User Join Date: Mar 2012 Location: NC Posts: 1,101	Re: My first build - 67 GMC small window stepper more.... Attached Images __________________ My build thread... http://67-72chevytrucks.com/vboard/s...d.php?t=515829 Disabled Veteran 82nd Airborne Division Operations: Desert Shield, Desert Storm, and Uphold Democracy

06-10-2012, 12:06 AM	#45
naphtali5725 Registered User Join Date: Mar 2012 Location: NC Posts: 1,101	Re: My first build - 67 GMC small window stepper more..... Attached Images __________________ My build thread... http://67-72chevytrucks.com/vboard/s...d.php?t=515829 Disabled Veteran 82nd Airborne Division Operations: Desert Shield, Desert Storm, and Uphold Democracy

06-10-2012, 12:08 AM	#46
naphtali5725 Registered User Join Date: Mar 2012 Location: NC Posts: 1,101	Re: My first build - 67 GMC small window stepper lots of dis-assembly done...pretty busy Attached Images __________________ My build thread... http://67-72chevytrucks.com/vboard/s...d.php?t=515829 Disabled Veteran 82nd Airborne Division Operations: Desert Shield, Desert Storm, and Uphold Democracy

06-10-2012, 12:09 AM	#47
naphtali5725 Registered User Join Date: Mar 2012 Location: NC Posts: 1,101	Re: My first build - 67 GMC small window stepper more teardown Attached Images __________________ My build thread... http://67-72chevytrucks.com/vboard/s...d.php?t=515829 Disabled Veteran 82nd Airborne Division Operations: Desert Shield, Desert Storm, and Uphold Democracy

06-10-2012, 12:11 AM	#48
naphtali5725 Registered User Join Date: Mar 2012 Location: NC Posts: 1,101	Re: My first build - 67 GMC small window stepper keeping busy, teardown almost done Attached Images __________________ My build thread... http://67-72chevytrucks.com/vboard/s...d.php?t=515829 Disabled Veteran 82nd Airborne Division Operations: Desert Shield, Desert Storm, and Uphold Democracy



Register or Log In To remove these advertisements.

06-10-2012, 02:17 AM	#49
NewType72 Registered User Join Date: Feb 2012 Location: turlock Posts: 2,177	Re: My first build - 67 GMC small window stepper Man that is quite the disassembly looks like it was blown apart after Posted via Mobile Device __________________ Project NewType 1972 Chevy C/10 Cheyenne Super ( Daily Driven Showtruck ) http://67-72chevytrucks.com/vboard/s...d.php?t=507903 Project Great Grandpa's Legacy 1973 Chevy C/10 Cheyenne ( Current daily driver collecting big time parts ) http://67-72chevytrucks.com/vboard/s...89#post7084289 - Dylan (209)-985-7721

Register or Log In To remove these advertisements.