GA 6 cyl carb , HEI , and more - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**southern parts** · 10-14-2013, 08:14 PM

I pulled this from a 72 swb truck. 6 cyl automatic.
the engine skips and knocks but still has some useable parts.

bare engine- $50 (NO SHIPPING)

turbo 350 trans- it would go into gear but I only tested it enough to move the truck back and forth a couple feet. being sold as a core $100 (NO SHIPPING)

carb- looks to be rebuilt, #7040007 shows to be from a 70 model truck or blazer. $30

motor mounts $25

frame stands $25

exhaust manifold with intake and bolts $75

hei distributor- $50

fan , spacer , wp pulley, and bolts. $25

gas pedal with throttle cable $25

t- stat housing $10

1 pc. drive shaft $100

all prices are plus shipping

going to scrap on saturday

72ChevySS · 10-14-2013, 09:00 PM

Interested in the heads, also what's the casting# on the block and do the heads have the lift bracket hole on rear of head?

72ChevySS · 10-14-2013, 09:21 PM

Interested in carb, if it comes with air filter and hoses I'll take it.

RJGeister · 11-04-2013, 03:18 AM

Valve cover any good?

**NGN** · 11-04-2013, 10:41 AM

I'll take every thing to do with the automatic , intake ,exhuast manifolds ,linkage and all parts related to the automatic and carb if still avilabe oh and gas padel with throddel cabel also distributor.
Thanks Nick

**NGN** · 11-04-2013, 10:59 AM

I will also take any brackets all linkage to the carb back to the trans if possible and colume linkage to. Would that truck have the full fan shrout like a V8 one looks but for a L6 , if it's in good shape I'll take it all .
Thank again Nick

**NGN** · 11-04-2013, 11:04 AM

I just seen the date, I hope it's not to late. Did I miss out.
Nick

68 IRON · 11-04-2013, 05:17 PM

Interested in HEI....too late? Let us know. Ya...I just saw this too!

**southern parts** · 11-04-2013, 07:29 PM

RJGeister- valve cover had some kind of epoxy repair. it was junked with the engine.

NGN- i still have the intake & exhaust manifold, carb, pedal & throttle cable. No help on the shroud or column linkage.

68 iron- i still have the hei too.

**NGN** · 11-04-2013, 10:12 PM

Cool , and would you have linkage on the carb . I made my truck a 350 auto and would like all parts after the trans to the carb the more parts the better, I'll take what you got. Shoot me price , do you take money order. Thanks Nick

RJGeister · 11-05-2013, 02:22 AM

Thanks!

altunaa · 11-05-2013, 04:19 PM

please put me next in line for the hei distributor ( shipped to fl, usa ),thanks, best regards

68 IRON · 11-06-2013, 04:01 PM

Can I get a shipping quote to 98501......I wont need the wires. Thanks! Oh while I'm at it.....could ya give me a price for dipstick and t-stat lower housing. Thanks again!!!

altunaa · 11-07-2013, 07:06 AM

hi, i am interested in the wires, shipped to a relative in miami, fl

**NGN** · 11-08-2013, 02:08 PM

I'm still here and I still take them parts just a little busy . My zip 08857. I'll send ya pm . Thanks Nick

68 IRON · 11-10-2013, 12:06 PM

No worries.....I'll check in later!

68 IRON · 11-13-2013, 10:56 AM

Money sent per PM.....Thank you!

68 IRON · 11-18-2013, 08:08 PM

I got the parts just now, but the lower t-stat housing is not the one in the picture. The one I got looks as though it came off of an earlier engine.
Name: PreMove 073.jpg
Views: 158
Size: 39.4 KB

Name: PreMove 073.jpg
Views: 158
Size: 39.4 KB

Name: PreMove 074.jpg
Views: 158
Size: 34.7 KB

Let me know....I dont know how I would make this work correctly for my application.

**southern parts** · 11-18-2013, 10:53 PM

my bad, that one is from a 292. send it back and I`ll send this one and repay you for the shipping. sorry, Woody

68 IRON · 11-19-2013, 11:53 AM

Thanks Woody! I do appreciate it. I'll try and send it out in a couple days.
-John

68 IRON · 11-19-2013, 11:54 AM

And the HEI should clean up nicely too.....thanks again!

OLEBEATER · 07-29-2017, 03:11 PM

This is about parts from 2013 but am looking for carb linkage parts from the 6 cyl. I have cable linkage. Thanks............

10-14-2013, 08:14 PM	#1
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,470	6 cyl carb , HEI , and more I pulled this from a 72 swb truck. 6 cyl automatic. the engine skips and knocks but still has some useable parts. bare engine- $50 (NO SHIPPING) turbo 350 trans- it would go into gear but I only tested it enough to move the truck back and forth a couple feet. being sold as a core $100 (NO SHIPPING) carb- looks to be rebuilt, #7040007 shows to be from a 70 model truck or blazer. $30 motor mounts $25 frame stands $25 exhaust manifold with intake and bolts $75 hei distributor- $50 fan , spacer , wp pulley, and bolts. $25 gas pedal with throttle cable $25 t- stat housing $10 1 pc. drive shaft $100 all prices are plus shipping going to scrap on saturday Attached Images Last edited by southern parts; 10-14-2013 at 09:42 PM.

10-14-2013, 09:00 PM	#2
72ChevySS Registered User Join Date: Jun 2011 Location: Rio Rancho, NM Posts: 47	Re: 6 cyl carb , HEI , and more Interested in the heads, also what's the casting# on the block and do the heads have the lift bracket hole on rear of head? __________________ Jonathan

10-14-2013, 09:21 PM	#3
72ChevySS Registered User Join Date: Jun 2011 Location: Rio Rancho, NM Posts: 47	Re: 6 cyl carb , HEI , and more Interested in carb, if it comes with air filter and hoses I'll take it. __________________ Jonathan

11-04-2013, 03:18 AM	#4
RJGeister Retired Air Force 87-09 Join Date: Feb 2007 Location: Bonaire, Georgia 31005 Posts: 284	Re: 6 cyl carb , HEI , and more Valve cover any good?

11-04-2013, 10:41 AM	#5
NGN Registered User Join Date: Nov 2001 Location: Old Bridge,NJ Posts: 820	Re: 6 cyl carb , HEI , and more I'll take every thing to do with the automatic , intake ,exhuast manifolds ,linkage and all parts related to the automatic and carb if still avilabe oh and gas padel with throddel cabel also distributor. Thanks Nick

11-04-2013, 10:59 AM	#6
NGN Registered User Join Date: Nov 2001 Location: Old Bridge,NJ Posts: 820	Re: 6 cyl carb , HEI , and more I will also take any brackets all linkage to the carb back to the trans if possible and colume linkage to. Would that truck have the full fan shrout like a V8 one looks but for a L6 , if it's in good shape I'll take it all . Thank again Nick

11-04-2013, 11:04 AM	#7
NGN Registered User Join Date: Nov 2001 Location: Old Bridge,NJ Posts: 820	Re: 6 cyl carb , HEI , and more I just seen the date, I hope it's not to late. Did I miss out. Nick Last edited by NGN; 11-04-2013 at 05:17 PM.

11-04-2013, 05:17 PM	#8
68 IRON Registered User Join Date: Sep 2010 Location: Olympia, WA Posts: 736	Re: 6 cyl carb , HEI , and more Interested in HEI....too late? Let us know. Ya...I just saw this too!

11-04-2013, 07:29 PM	#9
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,470	Re: 6 cyl carb , HEI , and more RJGeister- valve cover had some kind of epoxy repair. it was junked with the engine. NGN- i still have the intake & exhaust manifold, carb, pedal & throttle cable. No help on the shroud or column linkage. 68 iron- i still have the hei too.

11-04-2013, 10:12 PM	#10
NGN Registered User Join Date: Nov 2001 Location: Old Bridge,NJ Posts: 820	Re: 6 cyl carb , HEI , and more Cool , and would you have linkage on the carb . I made my truck a 350 auto and would like all parts after the trans to the carb the more parts the better, I'll take what you got. Shoot me price , do you take money order. Thanks Nick Last edited by NGN; 11-04-2013 at 10:24 PM.

11-05-2013, 02:22 AM	#11
RJGeister Retired Air Force 87-09 Join Date: Feb 2007 Location: Bonaire, Georgia 31005 Posts: 284	Re: 6 cyl carb , HEI , and more Thanks!

11-05-2013, 04:19 PM	#12
altunaa Registered User Join Date: Jan 2006 Location: Uruguay Posts: 101	Re: 6 cyl carb , HEI , and more please put me next in line for the hei distributor ( shipped to fl, usa ),thanks, best regards

11-06-2013, 04:01 PM	#13
68 IRON Registered User Join Date: Sep 2010 Location: Olympia, WA Posts: 736	Re: 6 cyl carb , HEI , and more Can I get a shipping quote to 98501......I wont need the wires. Thanks! Oh while I'm at it.....could ya give me a price for dipstick and t-stat lower housing. Thanks again!!!

11-07-2013, 07:06 AM	#14
altunaa Registered User Join Date: Jan 2006 Location: Uruguay Posts: 101	Re: 6 cyl carb , HEI , and more hi, i am interested in the wires, shipped to a relative in miami, fl

11-08-2013, 02:08 PM	#15
NGN Registered User Join Date: Nov 2001 Location: Old Bridge,NJ Posts: 820	Re: 6 cyl carb , HEI , and more I'm still here and I still take them parts just a little busy . My zip 08857. I'll send ya pm . Thanks Nick Last edited by NGN; 11-08-2013 at 02:31 PM.



Register or Log In To remove these advertisements.

11-10-2013, 12:06 PM	#16
68 IRON Registered User Join Date: Sep 2010 Location: Olympia, WA Posts: 736	Re: 6 cyl carb , HEI , and more No worries.....I'll check in later!

11-13-2013, 10:56 AM	#17
68 IRON Registered User Join Date: Sep 2010 Location: Olympia, WA Posts: 736	Re: 6 cyl carb , HEI , and more Money sent per PM.....Thank you!

11-18-2013, 08:08 PM	#18
68 IRON Registered User Join Date: Sep 2010 Location: Olympia, WA Posts: 736	Re: 6 cyl carb , HEI , and more I got the parts just now, but the lower t-stat housing is not the one in the picture. The one I got looks as though it came off of an earlier engine. Let me know....I dont know how I would make this work correctly for my application.

11-18-2013, 10:53 PM	#19
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,470	Re: 6 cyl carb , HEI , and more my bad, that one is from a 292. send it back and I`ll send this one and repay you for the shipping. sorry, Woody Attached Images

11-19-2013, 11:53 AM	#20
68 IRON Registered User Join Date: Sep 2010 Location: Olympia, WA Posts: 736	Re: 6 cyl carb , HEI , and more Thanks Woody! I do appreciate it. I'll try and send it out in a couple days. -John

11-19-2013, 11:54 AM	#21
68 IRON Registered User Join Date: Sep 2010 Location: Olympia, WA Posts: 736	Re: 6 cyl carb , HEI , and more And the HEI should clean up nicely too.....thanks again!

07-29-2017, 03:11 PM	#22
OLEBEATER Registered User Join Date: Mar 2009 Location: Virginia Posts: 295	Re: 6 cyl carb , HEI , and more This is about parts from 2013 but am looking for carb linkage parts from the 6 cyl. I have cable linkage. Thanks............

Register or Log In To remove these advertisements.