6 Lug Rear Disc with 15" Wheels and an E-Brake - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Captainfab** · 01-15-2015, 12:27 AM

I don't see a problem with fitment. PM sent

Quote:

Originally Posted by Campbel45

So these will work with the 15" steelie disc brake wheels (4 nub) or no? If so I am interested in a set

Z28SB350 · 03-31-2015, 05:03 PM

New to this forum, but I'm interested in a set of these. I've got a '69 with a 12-bolt, 6 lug rear- running factory steel rims. I've seen others suggest that you could simply purchase new axles that would be ready to go with the rotors required with this system- does anyone have the associated P/N's for those or know where to get them? Also, has anyone discovered what sort of E-brake cables are required with this setup?

**Captainfab** · 04-01-2015, 01:00 AM

You can get 6 lug replacement axles from any vendor that specializes in differentials such as Randy's Ring and Pinion, or Toms Differentials, or from Summit Racing. Before purchasing axles just to have the correct flange OD for the rotors, I would verify the dimension of the axles being purchased.

**First c10** · 04-05-2015, 12:45 PM

Hey captain happy Easter
The rotors for this install are 88-91 k1500 they show 2 kinds. 1" and 1.29" version I haven't seen anything on the f44 version.
Do you happen to have part numbers and info like you have in your other post? I just want to get the info right and I will be ordering ASAP.
Can you help me out?
Thanks Scott

**Captainfab** · 04-06-2015, 12:48 AM

I don't have that parts list here on my home computer. The part numbers are on the list of parts that come with the brackets.

Quote:

Originally Posted by First c10

Hey captain happy Easter
The rotors for this install are 88-91 k1500 they show 2 kinds. 1" and 1.29" version I haven't seen anything on the f44 version.
Do you happen to have part numbers and info like you have in your other post? I just want to get the info right and I will be ordering ASAP.
Can you help me out?
Thanks Scott

**First c10** · 04-06-2015, 12:51 AM

Ok I want to see the cost for me to go the rear disc route.

shawno72 · 04-06-2015, 01:06 AM

Great info

**First c10** · 04-07-2015, 02:32 AM

Can you please pm me with payment info and please post the parts list.
Thanks

**Captainfab** · 04-08-2015, 12:09 AM

I'll send you a PM.

Here is the parts list.

Rotors

Raybestos (Brake Best) #5977 or #5977RGS (economy)

Loaded Calipers

A1 Cardone # 16-4138(right)
# 16-4139(left)

The calipers can also be found at Speedway Motors and on ebay as a pair

Pads

Brake Best #MKD202 (can substitute MKD154)

Hoses

This is merely a suggestion as there are several OEM applications that will work

1979 Chevette front hoses (14.25”)

Brake Best #BH86572 (left or right)
Raybestos #BH36832

’79-’85 Eldorado, Riveria, Toronado front hoses (16.75”)

Brake Best #BH98913
#BH98914

Quote:

Originally Posted by First c10

Can you please pm me with payment info and please post the parts list.
Thanks

**First c10** · 04-08-2015, 01:05 AM

Quote:

Originally Posted by Captainfab

I'll send you a PM.

Here is the parts list.

Rotors

Raybestos (Brake Best) #5977 or #5977RGS (economy)

Loaded Calipers

A1 Cardone # 16-4138(right)
# 16-4139(left)

The calipers can also be found at Speedway Motors and on ebay as a pair

Pads

Brake Best #MKD202 (can substitute MKD154)

Hoses

This is merely a suggestion as there are several OEM applications that will work

1979 Chevette front hoses (14.25”)

Brake Best #BH86572 (left or right)
Raybestos #BH36832

’79-’85 Eldorado, Riveria, Toronado front hoses (16.75”)

Brake Best #BH98913
#BH98914

Pm sent

Can you tell me the vehicle that the rotors are from?

**Captainfab** · 04-08-2015, 01:35 AM

The same application I state in post #1. They are for a '88-'91 K1500 without the F44 suspension.

Quote:

Originally Posted by First c10

Pm sent

Can you tell me the vehicle that the rotors are from?

**First c10** · 04-11-2015, 10:14 AM

Captainfab, kit came in yesterday. I will post pictures when installed. Thank you

**First c10** · 04-22-2015, 01:06 AM

This was mocked up. Looks good way better than any drum. Will be a while before I get to test them out.
Thanks captain fab.

**First c10** · 04-22-2015, 01:07 AM

Axle painted and installed

aggie91 · 04-22-2015, 03:51 PM

Captain,

Just sent you a PM with a question about an idea for another version of this...

Thanks,

**Captainfab** · 04-23-2015, 12:58 AM

PM replied to

Quote:

Originally Posted by aggie91

Captain,

Just sent you a PM with a question about an idea for another version of this...

Thanks,

**First c10** · 04-23-2015, 09:47 AM

OK fill us in on what your working on!!!

aggie91 · 04-23-2015, 09:57 AM

Thanks for the reply. I am going to hold off on spilling the beans just yet. I sent CaptainFab another reply this morning. I think a lot of people will like it.

**First c10** · 04-23-2015, 10:06 AM

Quote:

Originally Posted by aggie91

Thanks for the reply. I am going to hold off on spilling the beans just yet. I sent CaptainFab another reply this morning. I think a lot of people will like it.

Aww Come on!!!

**Captainfab** · 04-24-2015, 12:38 AM

He came up with the same idea I had when I designed these 6 lug brackets. It will be a little while.

Quote:

Originally Posted by First c10

Aww Come on!!!

Juiced06GTO · 05-12-2015, 09:10 PM

Hey I am interested in this set up, I am just wondering what exactly needs to be machined down? Just the hub on the axle? Or can we open up the hole on the rotor? Thanks!

**Captainfab** · 05-12-2015, 11:15 PM

Yes the hub on the axle flange is much bigger than the rotor's center hole. You can certainly have the rotors machined, but I prefer to have the axles machined. That way if you have to replace a rotor, you don't have to have the machining done again.

Quote:

Originally Posted by Juiced06GTO

Hey I am interested in this set up, I am just wondering what exactly needs to be machined down? Just the hub on the axle? Or can we open up the hole on the rotor? Thanks!

Campbel45 · 05-16-2015, 10:31 PM

Hey Captain,

So I'm finally getting ready to put this kit on. However do you know how important it is for the axle register to fit tightly on the stock 15" steelies? I'm thinking that this centers the wheel to the axle but I'm not sure how important this is?

If I machine the axle register to 3.06 do the lug nuts center the wheel?

If I machine the rotor to the appropriate size then the wheel could still be centered.

Sorry if I'm thinking incorrectly

**Captainfab** · 05-16-2015, 11:10 PM

With factory wheels, the hubs and the lug nuts center the wheel. Most aftermarket wheels rely on the lug nuts alone to keep the wheel centered. I don't see a problem with machining the original hubs down to accommodate the rotors and using the lug nuts to center the wheels.

**Captainfab** · 06-20-2015, 01:58 AM

Bump

03-31-2015, 05:03 PM	#27
Z28SB350 Registered User Join Date: Mar 2015 Location: Wendell, NC Posts: 1	Re: 6 Lug Rear Disc with 15" Wheels and an E-Brake New to this forum, but I'm interested in a set of these. I've got a '69 with a 12-bolt, 6 lug rear- running factory steel rims. I've seen others suggest that you could simply purchase new axles that would be ready to go with the rotors required with this system- does anyone have the associated P/N's for those or know where to get them? Also, has anyone discovered what sort of E-brake cables are required with this setup?

04-01-2015, 01:00 AM	#28
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: 6 Lug Rear Disc with 15" Wheels and an E-Brake You can get 6 lug replacement axles from any vendor that specializes in differentials such as Randy's Ring and Pinion, or Toms Differentials, or from Summit Racing. Before purchasing axles just to have the correct flange OD for the rotors, I would verify the dimension of the axles being purchased. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

04-05-2015, 12:45 PM	#29
First c10 Senior Member Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	Re: 6 Lug Rear Disc with 15" Wheels and an E-Brake Hey captain happy Easter The rotors for this install are 88-91 k1500 they show 2 kinds. 1" and 1.29" version I haven't seen anything on the f44 version. Do you happen to have part numbers and info like you have in your other post? I just want to get the info right and I will be ordering ASAP. Can you help me out? Thanks Scott __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!!

04-06-2015, 12:51 AM	#31
First c10 Senior Member Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	Re: 6 Lug Rear Disc with 15" Wheels and an E-Brake Ok I want to see the cost for me to go the rear disc route. __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!!

04-06-2015, 01:06 AM	#32
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: 6 Lug Rear Disc with 15" Wheels and an E-Brake Great info __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

04-07-2015, 02:32 AM	#33
First c10 Senior Member Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	Re: 6 Lug Rear Disc with 15" Wheels and an E-Brake Can you please pm me with payment info and please post the parts list. Thanks __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!!

04-11-2015, 10:14 AM	#37
First c10 Senior Member Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	Re: 6 Lug Rear Disc with 15" Wheels and an E-Brake Captainfab, kit came in yesterday. I will post pictures when installed. Thank you __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!!

04-22-2015, 01:06 AM	#38
First c10 Senior Member Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	Re: 6 Lug Rear Disc with 15" Wheels and an E-Brake This was mocked up. Looks good way better than any drum. Will be a while before I get to test them out. Thanks captain fab. Attached Images __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!!

04-22-2015, 01:07 AM	#39
First c10 Senior Member Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	Re: 6 Lug Rear Disc with 15" Wheels and an E-Brake Axle painted and installed Attached Images __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!!

04-22-2015, 03:51 PM	#40
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: 6 Lug Rear Disc with 15" Wheels and an E-Brake Captain, Just sent you a PM with a question about an idea for another version of this... Thanks, __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

04-23-2015, 09:47 AM	#42
First c10 Senior Member Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	Re: 6 Lug Rear Disc with 15" Wheels and an E-Brake OK fill us in on what your working on!!! __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!!

04-23-2015, 09:57 AM	#43
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: 6 Lug Rear Disc with 15" Wheels and an E-Brake Thanks for the reply. I am going to hold off on spilling the beans just yet. I sent CaptainFab another reply this morning. I think a lot of people will like it. __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

05-12-2015, 09:10 PM	#46
Juiced06GTO Registered User Join Date: Jul 2010 Location: Sutton, MA Posts: 130	Re: 6 Lug Rear Disc with 15" Wheels and an E-Brake Hey I am interested in this set up, I am just wondering what exactly needs to be machined down? Just the hub on the axle? Or can we open up the hole on the rotor? Thanks!

05-16-2015, 10:31 PM	#48
Campbel45 Registered User Join Date: May 2013 Location: Greenwood, IN Posts: 376	Re: 6 Lug Rear Disc with 15" Wheels and an E-Brake Hey Captain, So I'm finally getting ready to put this kit on. However do you know how important it is for the axle register to fit tightly on the stock 15" steelies? I'm thinking that this centers the wheel to the axle but I'm not sure how important this is? If I machine the axle register to 3.06 do the lug nuts center the wheel? If I machine the rotor to the appropriate size then the wheel could still be centered. Sorry if I'm thinking incorrectly

05-16-2015, 11:10 PM	#49
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: 6 Lug Rear Disc with 15" Wheels and an E-Brake With factory wheels, the hubs and the lug nuts center the wheel. Most aftermarket wheels rely on the lug nuts alone to keep the wheel centered. I don't see a problem with machining the original hubs down to accommodate the rotors and using the lug nuts to center the wheels. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE



Register or Log In To remove these advertisements.

06-20-2015, 01:58 AM	#50
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: 6 Lug Rear Disc with 15" Wheels and an E-Brake Bump __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.