2010 dash swap - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kipps · 03-22-2018, 04:01 PM

Have a complete 2010 tahoe donor. 5.3 going into a squarebody.

Considering moving the gauges over to the square, but not sure if it's even possible.

If I understand correctly, the PCM sends data to the BCM, and the BCM outputs to the stepper motors in the instrument cluster. Is there a way to eliminate the BCM, or limit its function to just converting data from the PCM?

Any threads or suggestions are welcome!

03-22-2018, 04:01 PM	#1
kipps Registered User Join Date: Jul 2014 Location: North-central Virginia Posts: 1,099	2010 dash swap Have a complete 2010 tahoe donor. 5.3 going into a squarebody. Considering moving the gauges over to the square, but not sure if it's even possible. If I understand correctly, the PCM sends data to the BCM, and the BCM outputs to the stepper motors in the instrument cluster. Is there a way to eliminate the BCM, or limit its function to just converting data from the PCM? Any threads or suggestions are welcome!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.