Tilt steering turn signal pin removal.

[MAC71Cheyenne]

Was having a rotten time with the half moon connector and figuring out how to get the wiring and connector down Inside the column without completely dissembling the upper column.
Taking the old signal switch return spring clip, I flattened the clip and folded it over making a Swiss Army knife style pair of tweezers. The stiff spring with the small tab ends now slip into the sides of the connector releasing the wire connector from the housing with out damaging anything.
I can now slip the wires through the shift/tilt housing and through the tapered bucket. From their you are home free to slide them into the underside of the column, then rejoin your wires to the half moon.
Hopefully the crappy pics help.