The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 09-28-2020, 10:56 AM   #1
blazer2007
Registered User
 
Join Date: Jan 2007
Location: vernon b.c.
Posts: 3,019
88-98 rearend in a 78 1/2 ton ?

I read that a 88 rear is about 1 inch wider than a 78 which would look good pushing the back tires out abit. I sure you would have change spring pads, Just wonder who has done it. Are the 88 style rearends any good?
blazer2007 is offline   Reply With Quote
Old 09-28-2020, 11:42 AM   #2
kwmech
Senior Member
 
Join Date: Mar 2003
Location: Colfax-California
Posts: 8,355
Re: 88-98 rearend in a 78 1/2 ton ?

Quote:
Originally Posted by blazer2007 View Post


Are the 88 style rearends any good?
Not really, probably going to be a 10 bolt--- with a gov-loc. Any more than stock horsepower and lots of miles on is guaranteed destruction unless the first thing you do is rebuild it. Even at that it is just not a rear axle that belonged in a truck
kwmech is offline   Reply With Quote
Old 09-28-2020, 05:31 PM   #3
SCOTI
Registered User
 
SCOTI's Avatar
 
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 21,891
Re: 88-98 rearend in a 78 1/2 ton ?

The 88-98's are a corporate 10-bolt just like it's predecessor; only wider. 10-bolts are not in the realm of 'HD' strong from the factory but can be built for abuse.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG

Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....

Cubic inches is like Indiana Jones with a cheap pistol.
SCOTI is offline   Reply With Quote
Old 09-28-2020, 08:53 PM   #4
Ziegelsteinfaust
Registered User
 
Join Date: Dec 2012
Location: Temple City
Posts: 3,551
Re: 88-98 rearend in a 78 1/2 ton ?

Like said above it is a box standard 8.5 10 bolt, but i say it is a good rear-end for a true rated 1/2 ton. My 2018 does fine with the slightly upgraded 8.6 10 bolt. Mind you I only have 28,000 miles, but i have faith. Plus there cheap to rebuild or upgrade.

All semi floaters the outer bearings take a beating if uses hard, and they should be checked. Or atleast the wheels wiggled to see if you can feel to much play.

If I were to replace a 8.5 10 bolt in a 1/2 ton, and if for what ever reason. On a budget it would be a brand F 8.8, and money 💰 no issue it would be a 9 inch. The 12 bolt would only be for some 100 point resto. It cost alot, and offers no advantages at its price point. With my limited skill I could build a epic 8.8 for just over 1/2 what a new 12 bolt costs, or what a used one cost typically.

Either way I would use a main cap support cover like this.
https://www.jegs.com/i/Moser/718/710...IaAre4EALw_wcB

Every rear end I tore up or all 4 of them was be cause the main caps walked under pressure of my ignorance. Every rear end I had with a cover lasted through my stupidity. These were not race vehicles, but me doing what ever for fun.

I do like the wider axle idea because I love flush fitting tires.
Ziegelsteinfaust is offline   Reply With Quote
Old 09-28-2020, 08:56 PM   #5
kipps
Registered User
 
Join Date: Jul 2014
Location: North-central Virginia
Posts: 1,099
Re: 88-98 rearend in a 78 1/2 ton ?

Quote:
Originally Posted by Ziegelsteinfaust View Post
I do like the wider axle idea because I love flush fitting tires.
Is there any concern with reduced turning radius?

I'm doing something similar, in switching a 9.5 14-bolt for a 2001 10.5 14-bolt. The wheel mounting width will be two inches wider.

I was told that GM intentionally narrowed up the rear wheels to improve low-speed maneuverability. Will I be compromising that by using a wider rear axle?
__________________
1987 C6P V20 truck, 2010 LMG 5.3, AFM delete, 2010 Camaro exhaust manifolds, 1997 nv4500, 1991 np241c, hydroboost, 2005 14bff axle & driveshaft, drop-n-lock gooseneck, 4.10 gears, stock suspension, rims, and tires. Still a work in progress. Any questions or suggestions are welcome!
kipps is offline   Reply With Quote
Old 09-28-2020, 11:50 PM   #6
Ziegelsteinfaust
Registered User
 
Join Date: Dec 2012
Location: Temple City
Posts: 3,551
Re: 88-98 rearend in a 78 1/2 ton ?

Quote:
Originally Posted by kipps View Post
Is there any concern with reduced turning radius?

I'm doing something similar, in switching a 9.5 14-bolt for a 2001 10.5 14-bolt. The wheel mounting width will be two inches wider.

I was told that GM intentionally narrowed up the rear wheels to improve low-speed maneuverability. Will I be compromising that by using a wider rear axle?
Yes, but not that much as taller tires would do to you.

On my 74 C20 with a 85 C20 14 bolt semi floater. When I added 2 inch spacers to the rear, and 1 inch spacers in the front. For the flush look, but still have full compression. It roughly added 3 foot to a U-turn.

When I converted my truck to 4x4 I went from roller 245/70r16' to new 285/75r16, and it gained over 5 foot. With the exact same rims, and spacers. Going off memory hear.

I have heard that too, but I never thought to do any testing . Also I have heard they didn't want the tires riding in the same "rut" for lack of the proper term.
Ziegelsteinfaust is offline   Reply With Quote
Old 09-28-2020, 09:07 PM   #7
blazer2007
Registered User
 
Join Date: Jan 2007
Location: vernon b.c.
Posts: 3,019
Re: 88-98 rearend in a 78 1/2 ton ?

Thanks ,I thought maybe they had improved the 88 rear from the 81-87,but guess not.
blazer2007 is offline   Reply With Quote
Old 09-29-2020, 03:58 PM   #8
Rich84
Registered User
 
Rich84's Avatar
 
Join Date: Mar 2012
Location: Woodbury, Ct.
Posts: 1,661
Re: 88-98 rearend in a 78 1/2 ton ?

The '88 and up are 30 spline Vs. 28 which should make them a little stronger. For whatever that's worth. I have the '88 axles and carrier in my '84 10 bolt. If I remember correctly the axles were about 7/16" longer which does push the wheels out a bit. I have not noticed a difference in the turning radius, which wasn't great to begin with.
Rich84 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:40 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com