IN 1972 Bed Tool Box Trim and Hardware - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ChevyCruizer · 02-08-2013, 01:09 PM

I was going to get the entire bed, because there was no rust at all and it was straight. So the first day Pick a Part tells me it is too late in the day to help me, plus I didnt have my trailer. The second day they tell me it is going to be an extra $50 to help me get it to my trailer. The third day I go back with a 4x8 cart and ask a couple of random dudes to help me put it on the cart. We get it on there ok, but I dont like the way it is sitting (the front bed panel was down on the cart with the tailgate 8 feet up in the air). One of the helpers says no it is fine and gives the cart a quick shake and before I could grab it the bed fell over and smashed the entire area on both bedsides near the tail lights. So im not getting the entire bed now...

I took out the tool box and hid it in a car trunk. I can basically only go on the weekend because of work so if it is still there im gonna cut it out this weekend.

72chevysupercheyenne · 02-08-2013, 02:08 PM

okay thank for getting back to me let me know if you get it thanks again mike

72chevysupercheyenne · 02-08-2013, 02:15 PM

sorry need the Trim and Hardware too thanks again mike

72chevysupercheyenne · 02-08-2013, 02:20 PM

i see there is on door or Hardware thanks okay but if the to small trims are there i need them thanks

02-08-2013, 01:09 PM	#26
ChevyCruizer 17's too small Join Date: Oct 2004 Location: Las Vegas, NV Posts: 335	Re: 1972 Bed Tool Box Trim and Hardware I was going to get the entire bed, because there was no rust at all and it was straight. So the first day Pick a Part tells me it is too late in the day to help me, plus I didnt have my trailer. The second day they tell me it is going to be an extra $50 to help me get it to my trailer. The third day I go back with a 4x8 cart and ask a couple of random dudes to help me put it on the cart. We get it on there ok, but I dont like the way it is sitting (the front bed panel was down on the cart with the tailgate 8 feet up in the air). One of the helpers says no it is fine and gives the cart a quick shake and before I could grab it the bed fell over and smashed the entire area on both bedsides near the tail lights. So im not getting the entire bed now... I took out the tool box and hid it in a car trunk. I can basically only go on the weekend because of work so if it is still there im gonna cut it out this weekend. __________________ 68 C10 SWB SS 5 lug power disc brake conversion 2.5 inch drop spindles van tilt column Air Ride Technologies Cool Ride air bag kits Performance Online tubular upper control arms and shock relocator kits ECE super track panhard bar 1 piece side windows

02-08-2013, 02:08 PM	#27
72chevysupercheyenne Registered User Join Date: Feb 2013 Location: newburgh ny Posts: 17	Re: 1972 Bed Tool Box Trim and Hardware okay thank for getting back to me let me know if you get it thanks again mike

02-08-2013, 02:15 PM	#28
72chevysupercheyenne Registered User Join Date: Feb 2013 Location: newburgh ny Posts: 17	Re: 1972 Bed Tool Box Trim and Hardware sorry need the Trim and Hardware too thanks again mike

02-08-2013, 02:20 PM	#29
72chevysupercheyenne Registered User Join Date: Feb 2013 Location: newburgh ny Posts: 17	Re: 1972 Bed Tool Box Trim and Hardware i see there is on door or Hardware thanks okay but if the to small trims are there i need them thanks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.