68 burb with 6.0l drivetrain - The 1947 - Present Chevrolet & GMC Truck Message Board Network

six8burban · 03-19-2011, 08:47 PM

1968 3dr suburban (2004 6.0lL drivetrain) this is a project that I never finished. Vehicle is not drivable front is off ( see pic). Engine drivetrain and drive shaft connected and ready to go. stainless steal brake and fuel lines are connected and ready to go. New Front big disc brake kit, new brake booster and master cylinder. New quick ratio gear steering box. New Stainless steel gas tank. New springs and shocks and body bushing all the way around. Front and rear sway bars. ecu was mapped by street & performance (http://www.hotrodlane.cc/) headers and wiring harness also from S&P. Custom radiator and shroud with stall electric fan. Did not put front back on because Driver side rocker panel, and both cab supports need to be cut out and replaced.
So now it awaits a good body shop this is far as my skills take me. To replace driver side rocker and cab supports how much should i look to spend? IF I SELL WHATS A GOOD PRICE?

six8burban · 03-19-2011, 08:51 PM

more pics

six8burban · 03-19-2011, 08:56 PM

and more

six8burban · 03-19-2011, 09:24 PM

more pics

gcburdic · 03-20-2011, 09:35 AM

This is one cool project....what tranny did you use? Have you lowered it? can ya give any more info about it....I would be very interested in it if you do sell....

gcburdic · 03-22-2011, 10:14 AM

ttt.....anybody on WIW???

03-19-2011, 08:47 PM	#1
six8burban Registered User Join Date: Feb 2005 Location: philadelphia pa Posts: 124	68 burb with 6.0l drivetrain 1968 3dr suburban (2004 6.0lL drivetrain) this is a project that I never finished. Vehicle is not drivable front is off ( see pic). Engine drivetrain and drive shaft connected and ready to go. stainless steal brake and fuel lines are connected and ready to go. New Front big disc brake kit, new brake booster and master cylinder. New quick ratio gear steering box. New Stainless steel gas tank. New springs and shocks and body bushing all the way around. Front and rear sway bars. ecu was mapped by street & performance (http://www.hotrodlane.cc/) headers and wiring harness also from S&P. Custom radiator and shroud with stall electric fan. Did not put front back on because Driver side rocker panel, and both cab supports need to be cut out and replaced. So now it awaits a good body shop this is far as my skills take me. To replace driver side rocker and cab supports how much should i look to spend? IF I SELL WHATS A GOOD PRICE? Attached Images Last edited by six8burban; 03-19-2011 at 08:58 PM. Reason: might be 4sale

03-19-2011, 08:51 PM	#2
six8burban Registered User Join Date: Feb 2005 Location: philadelphia pa Posts: 124	Re: 68 burb with 6.0l drivetrain more pics Attached Images

03-19-2011, 08:56 PM	#3
six8burban Registered User Join Date: Feb 2005 Location: philadelphia pa Posts: 124	Re: 68 burb with 6.0l drivetrain and more Attached Images

03-19-2011, 09:24 PM	#4
six8burban Registered User Join Date: Feb 2005 Location: philadelphia pa Posts: 124	Re: 68 burb with 6.0l drivetrain more pics Attached Images

03-20-2011, 09:35 AM	#5
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: 68 burb with 6.0l drivetrain This is one cool project....what tranny did you use? Have you lowered it? can ya give any more info about it....I would be very interested in it if you do sell.... __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present

03-22-2011, 10:14 AM	#6
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: 68 burb with 6.0l drivetrain ttt.....anybody on WIW??? __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.