The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-03-2013, 12:12 PM   #51
msg
Registered User
 
Join Date: Feb 2013
Location: GA
Posts: 1,313
Re: How To Restore and Detail an Original Gauge Cluster

Thank you for doing this write up, I am definitely going to use this!!!
msg is offline   Reply With Quote
Old 05-27-2013, 05:04 PM   #52
JWheeler331
Registered User
 
JWheeler331's Avatar
 
Join Date: Apr 2013
Location: Louisiana
Posts: 553
Re: How To Restore and Detail an Original Gauge Cluster

Just took mine all apart today to see what all I need.

I have some bad overspray black pain on my lens. Does the replacement Lens from someone like LMC come with the speedo numbers and warning light areas already painted on the glass?
JWheeler331 is offline   Reply With Quote
Old 05-27-2013, 05:54 PM   #53
Lugnutz65
Registered User
 
Lugnutz65's Avatar
 
Join Date: Jan 2013
Location: Columbia, SC
Posts: 1,926
Re: How To Restore and Detail an Original Gauge Cluster

Quote:
Originally Posted by JWheeler331 View Post
Just took mine all apart today to see what all I need.

I have some bad overspray black pain on my lens. Does the replacement Lens from someone like LMC come with the speedo numbers and warning light areas already painted on the glass?
The greenish numbers and stuff is printed on the back of the lens. I wet sanded the front of mine starting with 1000 grit and finished with 2500 or 3000 grit, I can't remember exactly. Anyway, to finish, I used polish that is for glass stove tops. I don't know what aftermarket lenses look like, but I bet you can save yours.





__________________
My 65 C10 build: www.lugnutz65chevystepside.weebly.com

Want to know more about T5 transmissions? My website has a T5 Info Page and a Step by Step T5 rebuild.
Lugnutz65 is offline   Reply With Quote
Old 05-27-2013, 05:56 PM   #54
T2vigil
Registered User
 
T2vigil's Avatar
 
Join Date: Jan 2010
Location: Evensville, TN
Posts: 236
Re: How To Restore and Detail an Original Gauge Cluster

Great write up. Thanks for sharing.
T2vigil is offline   Reply With Quote
Old 05-27-2013, 08:04 PM   #55
theastronaut
Registered User
 
theastronaut's Avatar
 
Join Date: May 2011
Location: Anderson SC
Posts: 3,867
Re: How To Restore and Detail an Original Gauge Cluster

Quote:
Originally Posted by Lugnutz65 View Post
The greenish numbers and stuff is printed on the back of the lens. I wet sanded the front of mine starting with 1000 grit and finished with 2500 or 3000 grit, I can't remember exactly. Anyway, to finish, I used polish that is for glass stove tops. I don't know what aftermarket lenses look like, but I bet you can save yours.
This works well, I used the same process on mine although I haven't tried that polish. I (lightly!) used a wool pad and 3M polish to polish out the sanding scratches, then switched to a foam pad and used swirl remover to remove the buffer marks. The aftermarket lenses can benefit from sanding/buffing the front to make them "clearer" since there is a slight bit of distortion in the new lenses. It's not bad, I'm just picky about that kind of stuff....
theastronaut is offline   Reply With Quote
Old 06-05-2013, 07:37 PM   #56
Budman56
Registered User
 
Budman56's Avatar
 
Join Date: Aug 2011
Location: Patterson California
Posts: 1,133
Re: How To Restore and Detail an Original Gauge Cluster

Quote:
Originally Posted by theastronaut View Post
This works well, I used the same process on mine although I haven't tried that polish. I (lightly!) used a wool pad and 3M polish to polish out the sanding scratches, then switched to a foam pad and used swirl remover to remove the buffer marks. The aftermarket lenses can benefit from sanding/buffing the front to make them "clearer" since there is a slight bit of distortion in the new lenses. It's not bad, I'm just picky about that kind of stuff....
Theastronaut

What font style and size did you use for the over speed and tand'm lock?
I am looking at century gothic 7 point (size) bold it looks close.
Attached Images
 
__________________
MY 65 C20 BUILD
http://67-72chevytrucks.com/vboard/s...d.php?t=483346

......................_____
.........________//__{\_____
,,,,,,,/__(O)___//___/__(O)_/
Budman56 is offline   Reply With Quote
Old 06-05-2013, 07:48 PM   #57
theastronaut
Registered User
 
theastronaut's Avatar
 
Join Date: May 2011
Location: Anderson SC
Posts: 3,867
Re: How To Restore and Detail an Original Gauge Cluster

Quote:
Originally Posted by Budman56 View Post
Theastronaut

What font style and size did you use for the over speed and tand'm lock?
I am looking at century gothic 7 point (size) bold it looks close.
That looks just like what I used. It's been 3-4 years since I printed them so I don't remember the name of the font. I printed them out on plain paper to test the size and spacing, then made any adjustments in MS Paint.
Posted via Mobile Device
theastronaut is offline   Reply With Quote
Old 06-16-2013, 11:04 AM   #58
RoyL
Senior Member
 
RoyL's Avatar
 
Join Date: Aug 2010
Location: HSV, AL
Posts: 274
Re: How To Restore and Detail an Original Gauge Cluster

great detailed write-up!
Have you had any issues with grounding of the bulbs with the clear coat? Mine has been painted with silver, and occasionally, I'll get a blinker issue, and it goes away after re-seating the bulb socket assy into the cluster... I don't know if the original clusters were painted?
__________________
1965 Suburban
Waiting on Time and Money
RoyL is offline   Reply With Quote
Old 06-16-2013, 11:19 AM   #59
theastronaut
Registered User
 
theastronaut's Avatar
 
Join Date: May 2011
Location: Anderson SC
Posts: 3,867
Re: How To Restore and Detail an Original Gauge Cluster

Quote:
Originally Posted by RoyL View Post
great detailed write-up!
Have you had any issues with grounding of the bulbs with the clear coat? Mine has been painted with silver, and occasionally, I'll get a blinker issue, and it goes away after re-seating the bulb socket assy into the cluster... I don't know if the original clusters were painted?
Thanks RoyL! The original housings were bare steel with a clear coating to prevent rust. You bring up a good point that I hadn't thought of, it would be a good idea to clean off the clear/paint around the sockets and add dielectric grease for a better ground. I haven't had any problems with mine since its still on the shelf waiting for the rest of the truck to be finished...
Posted via Mobile Device
theastronaut is offline   Reply With Quote
Old 06-23-2013, 05:51 PM   #60
JWheeler331
Registered User
 
JWheeler331's Avatar
 
Join Date: Apr 2013
Location: Louisiana
Posts: 553
Re: How To Restore and Detail an Original Gauge Cluster

I am in the middle of restoring mine and was following this pretty closely.

Now it seems all the pictures are gone. Is this just on my end or did you remove the photobucket pics.
JWheeler331 is offline   Reply With Quote
Old 06-23-2013, 05:55 PM   #61
Lugnutz65
Registered User
 
Lugnutz65's Avatar
 
Join Date: Jan 2013
Location: Columbia, SC
Posts: 1,926
Re: How To Restore and Detail an Original Gauge Cluster

It's not you. Notice that some pics from other folks (mine for instance) are still there. Astronaut must have accidently moved his pics or messed up his account. Don't worry, he'll fix it.
__________________
My 65 C10 build: www.lugnutz65chevystepside.weebly.com

Want to know more about T5 transmissions? My website has a T5 Info Page and a Step by Step T5 rebuild.
Lugnutz65 is offline   Reply With Quote
Old 06-23-2013, 06:13 PM   #62
jayoldschool
Moderator
 
Join Date: Dec 2012
Location: ON, Canada
Posts: 2,148
Re: How To Restore and Detail an Original Gauge Cluster

I think he's just over on bandwidth. They'll come back.
jayoldschool is offline   Reply With Quote
Old 06-23-2013, 08:03 PM   #63
JWheeler331
Registered User
 
JWheeler331's Avatar
 
Join Date: Apr 2013
Location: Louisiana
Posts: 553
Re: How To Restore and Detail an Original Gauge Cluster

Quote:
Originally Posted by Lugnutz65 View Post
It's not you. Notice that some pics from other folks (mine for instance) are still there. Astronaut must have accidently moved his pics or messed up his account. Don't worry, he'll fix it.

Just making sure it was not me.

I was able to complete my project for this. I did not do a full out restoration but rather just touched mine up a bunch. When I get my new motor complete I will start my miles back to zero and actually put the new sticker numbers and letters on.

For this go around I did the following;

Took apart and cleaned.
Wiped down the speedo and gas gauge.
Daughter took the model paint and repainted the speedo and gas needle.
Painted the bezel
Painted the interior and exterior of the encasement
Painted the black/green door/window piece. (not sure what its called....the piece that the glass sits on top of).
Redone all of the red/green light parts
Cleaned up the lens the best I could. It was pretty rough with overspray and scratches. I think it done okay for now. Again, when I get my new motor ready I will replace the lens, bezel, and actual speedo and gas gauge faces.

Thank you very much for this thread to help a newbie like myself have the confidence to tackle this.

Here are a few pictures.

When I first took it apart













Some of the process











Put back together










Again, thank you for your how to thread. It was a big help.
JWheeler331 is offline   Reply With Quote
Old 06-23-2013, 09:08 PM   #64
Lugnutz65
Registered User
 
Lugnutz65's Avatar
 
Join Date: Jan 2013
Location: Columbia, SC
Posts: 1,926
Re: How To Restore and Detail an Original Gauge Cluster

Hey, WOW! That looks great! You did a nice job. There are many great contributors on this website. TheAstronaut is one of them! Did you line the carboard tubes with foil tape?
__________________
My 65 C10 build: www.lugnutz65chevystepside.weebly.com

Want to know more about T5 transmissions? My website has a T5 Info Page and a Step by Step T5 rebuild.
Lugnutz65 is offline   Reply With Quote
Old 06-23-2013, 11:15 PM   #65
JWheeler331
Registered User
 
JWheeler331's Avatar
 
Join Date: Apr 2013
Location: Louisiana
Posts: 553
Re: How To Restore and Detail an Original Gauge Cluster

Quote:
Originally Posted by Lugnutz65 View Post
Hey, WOW! That looks great! You did a nice job. There are many great contributors on this website. TheAstronaut is one of them! Did you line the carboard tubes with foil tape?

I didn't do that. I used two 3 layers of the colored transparent stuff and was afraid of it was any brighter when lit up that it would shine through too much. When I hook it up I will know for sure. If its dim I may do that. This transparent stuff is much more thin than the original.
Posted via Mobile Device
JWheeler331 is offline   Reply With Quote
Old 06-24-2013, 08:45 AM   #66
Lugnutz65
Registered User
 
Lugnutz65's Avatar
 
Join Date: Jan 2013
Location: Columbia, SC
Posts: 1,926
Re: How To Restore and Detail an Original Gauge Cluster

Quote:
Originally Posted by JWheeler331 View Post
I didn't do that. I used two 3 layers of the colored transparent stuff and was afraid of it was any brighter when lit up that it would shine through too much. When I hook it up I will know for sure. If its dim I may do that. This transparent stuff is much more thin than the original.
Posted via Mobile Device
I also used the transparent plastic film. I used 3 or 4 layers to try and match the original color. How many layers did you use?
Posted via Mobile Device
__________________
My 65 C10 build: www.lugnutz65chevystepside.weebly.com

Want to know more about T5 transmissions? My website has a T5 Info Page and a Step by Step T5 rebuild.
Lugnutz65 is offline   Reply With Quote
Old 06-24-2013, 09:33 AM   #67
theastronaut
Registered User
 
theastronaut's Avatar
 
Join Date: May 2011
Location: Anderson SC
Posts: 3,867
Re: How To Restore and Detail an Original Gauge Cluster

Quote:
Originally Posted by JWheeler331 View Post
I am in the middle of restoring mine and was following this pretty closely.

Now it seems all the pictures are gone. Is this just on my end or did you remove the photobucket pics.
I'm over the bandwidth allowance for the month... they'll come back once it resets for the month. Your cluster looks great!!
theastronaut is offline   Reply With Quote
Old 06-24-2013, 10:41 AM   #68
JWheeler331
Registered User
 
JWheeler331's Avatar
 
Join Date: Apr 2013
Location: Louisiana
Posts: 553
Re: How To Restore and Detail an Original Gauge Cluster

Quote:
Originally Posted by Lugnutz65 View Post
I also used the transparent plastic film. I used 3 or 4 layers to try and match the original color. How many layers did you use?
Posted via Mobile Device
I ended up using three for the red and think I put in an extra one giving me 4 for the green cold water temp.

Quote:
Originally Posted by theastronaut View Post
I'm over the bandwidth allowance for the month... they'll come back once it resets for the month. Your cluster looks great!!

Thanks. There is more that could have been done for this one but I am happy with the way it turned out.
JWheeler331 is offline   Reply With Quote
Old 06-24-2013, 10:57 AM   #69
Lugnutz65
Registered User
 
Lugnutz65's Avatar
 
Join Date: Jan 2013
Location: Columbia, SC
Posts: 1,926
Re: How To Restore and Detail an Original Gauge Cluster

Quote:
Originally Posted by JWheeler331 View Post
. . . was afraid if it was any brighter when lit up that it would shine through too much.
Posted via Mobile Device
I thought about using LED but then you can't dim them. They stay the same brightness. Then again, I have the dimmer all the way up on all my vehicles, so I doubt that I would dim them anyway.

I did bench test my gauge lights (all stock bulbs) after my resto and I think the 3 or 4 layers will look just right.
__________________
My 65 C10 build: www.lugnutz65chevystepside.weebly.com

Want to know more about T5 transmissions? My website has a T5 Info Page and a Step by Step T5 rebuild.
Lugnutz65 is offline   Reply With Quote
Old 06-24-2013, 11:26 AM   #70
JWheeler331
Registered User
 
JWheeler331's Avatar
 
Join Date: Apr 2013
Location: Louisiana
Posts: 553
Re: How To Restore and Detail an Original Gauge Cluster

Quote:
Originally Posted by Lugnutz65 View Post
I thought about using LED but then you can't dim them. They stay the same brightness. Then again, I have the dimmer all the way up on all my vehicles, so I doubt that I would dim them anyway.

I did bench test my gauge lights (all stock bulbs) after my resto and I think the 3 or 4 layers will look just right.

I put a flashlight with about the same brightness in the back and checked them out. I think it will shine nicely when in the truck.
JWheeler331 is offline   Reply With Quote
Old 06-24-2013, 12:37 PM   #71
Budman56
Registered User
 
Budman56's Avatar
 
Join Date: Aug 2011
Location: Patterson California
Posts: 1,133
Re: How To Restore and Detail an Original Gauge Cluster

Thank you for your (How to) I have now completed my cluster too.....
Attached Images
  
__________________
MY 65 C20 BUILD
http://67-72chevytrucks.com/vboard/s...d.php?t=483346

......................_____
.........________//__{\_____
,,,,,,,/__(O)___//___/__(O)_/
Budman56 is offline   Reply With Quote
Old 06-24-2013, 01:09 PM   #72
JWheeler331
Registered User
 
JWheeler331's Avatar
 
Join Date: Apr 2013
Location: Louisiana
Posts: 553
Re: How To Restore and Detail an Original Gauge Cluster

Quote:
Originally Posted by Budman56 View Post
Thank you for your (How to) I have now completed my cluster too.....


Looks great. I really want a cluster with the real gauges so I can have a tac also.
JWheeler331 is offline   Reply With Quote
Old 06-24-2013, 03:14 PM   #73
theastronaut
Registered User
 
theastronaut's Avatar
 
Join Date: May 2011
Location: Anderson SC
Posts: 3,867
Re: How To Restore and Detail an Original Gauge Cluster

Quote:
Originally Posted by Budman56 View Post
Thank you for your (How to) I have now completed my cluster too.....
You're welcome, glad to be a help! And great job on the cluster!
theastronaut is offline   Reply With Quote
Old 08-18-2013, 06:44 PM   #75
Acksman
Registered User
 
Join Date: May 2013
Location: Dallas Area, TX
Posts: 38
Re: How To Restore and Detail an Original Gauge Cluster

This is a great guide. I have been following it step by step. There was only a couple of places I changed things.

On the intermediate plate I was able to soda blast and came out without any warping or pitting. Did a nice job.

Also on the back of the intermediate plate I used Krylon Glowz to see if that will help with a brighter cluster. Here is the Glowz http://www.krylon.com/products/glowz/

Still waiting on a few parts to finish, but will post some pics once I'm done.
Acksman is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:35 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com