06-03-2019, 11:36 AM | #1 |
Senior Member
Join Date: Sep 2011
Location: Owosso, Michigan
Posts: 2,853
|
Need a Photo np205
I am in the process of swapping my th350 to a th400 in my 71 k20 and I am looking for pics of the NP205 shifter location in the high hump floor (keeping engine in factory location) The th400 moves it back 3" and not sure of clearance......thx !!
__________________
1967 C10 SWB Owner - Rustbelt Restorations |
06-05-2019, 10:50 PM | #2 |
Senior Member
Join Date: Apr 2006
Location: Yuba City, Ca
Posts: 1,920
|
Re: Need a Photo np205
Have you considered moving the engine forward instead. Much less work and usually the holes are in the frame already. If not the t-case handle has to be bent to clear into the stock hole. I’ve seen it done with a 4l80.
__________________
Kirk 72 Blazer CST 4wd highlander 66 Nova |
06-06-2019, 08:53 AM | #3 |
Senior Member
Join Date: Sep 2011
Location: Owosso, Michigan
Posts: 2,853
|
Re: Need a Photo np205
Was an abandoned project by others, trans crossmember and tc mount have been moved back and driveshifts have been built, was hoping to use what I have........also running a 292 and cannot move engine forward...prob just mod shifter but was looking for ideas......
__________________
1967 C10 SWB Owner - Rustbelt Restorations |
06-06-2019, 05:16 PM | #4 |
Registered User
Join Date: May 2012
Location: horseheads,ny rust belt
Posts: 2,794
|
Re: Need a Photo np205
i would make a new bracket / mount for the sifter handle and then a pair of hiem ends and threaded rod for a new link and be done with it .
this is a bit crazy but here is my custom mount for 5 levers . i built it off the top 4 bolts for the round 6 pattern adapter to the 203 range box on the 4l80-e to 241 adapter i used for the doubler . its just plate and 2 shifter kits from offroad design i modifyed . #1 - pto pump in/out for hydro winch #2 - in cab winch control #3 - 203 range box H/N/L #4 - rear output of 205 control H/N/L #5 - front output of 205 control H/N/L #6 lokar auto trans lever with linkage kit to make it work all the way up were its mounted back to the link point and then down to the trans arm .
__________________
77-k30lb BIG truck build . 87-k30lb budget beater build . 85-k30lb the plow machine build . 85-c10sb summer fun toy . ----------------------------- HOLLEY SNIPER efi = worst case of p.i.t.a i ever had . EDELBROCK pro flo 4 = best deal going so far . love my setup works great. Last edited by sweetk30; 06-06-2019 at 05:24 PM. |
06-06-2019, 05:27 PM | #5 |
Registered User
Join Date: May 2012
Location: horseheads,ny rust belt
Posts: 2,794
|
Re: Need a Photo np205
then when its ready for install i have the floor hump all layed out for the 3 boots . also will be using a stock sm465 shifter boot on the lokar shifter . and with its black shaft it will look like a 4 speed trans shifter .
__________________
77-k30lb BIG truck build . 87-k30lb budget beater build . 85-k30lb the plow machine build . 85-c10sb summer fun toy . ----------------------------- HOLLEY SNIPER efi = worst case of p.i.t.a i ever had . EDELBROCK pro flo 4 = best deal going so far . love my setup works great. |
06-08-2019, 03:53 PM | #6 |
Post Whore
Join Date: Feb 2016
Location: Portland Oregon
Posts: 10,813
|
Re: Need a Photo np205
Too cool!
__________________
Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. RIP Bob Parks. 1967 Burban the WMB,1991 S(stink)-10 Blazer,1969 GTO, 1970 Javelin, 1952 F2 Ford 4X4, 29 Model A, 72 Firebird. 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377 |
06-08-2019, 04:09 PM | #7 |
Registered User
Join Date: May 2012
Location: horseheads,ny rust belt
Posts: 2,794
|
Re: Need a Photo np205
ya anti-theft kit for gear heads . 6 levers who the heck will figure it all out even with a sticker showing the combo .
__________________
77-k30lb BIG truck build . 87-k30lb budget beater build . 85-k30lb the plow machine build . 85-c10sb summer fun toy . ----------------------------- HOLLEY SNIPER efi = worst case of p.i.t.a i ever had . EDELBROCK pro flo 4 = best deal going so far . love my setup works great. |
Bookmarks |
|
|