What do you guys think? - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Dinos63 · 07-28-2009, 12:10 AM

thats

**kev2809** · 07-28-2009, 06:01 AM

ur a damn good welder, nice work!

BuiltByBrooks · 07-28-2009, 11:12 PM

Quote:

Originally Posted by porterbuilt

After warming up in the garage, Brooks headed off to the Master Bedroom...

My wife loved it!!....

Thanks for the idea Nate

DZL1 · 07-29-2009, 06:37 AM

Man, you are a freak of nature! Thats all I can say. Incredible work.

DZL1.

Naterman35 · 08-03-2009, 09:09 PM

God your gifted. I wish i was that gifted in ANYTHING.

How did you get started?
Id love to learn to TIG. I've tried but i was only able to us it for about an hour... so my welds... then ones i could actually start.. looked like crap.

I was happy as can be to even get a puddle tho.

bmfpeterson · 08-05-2009, 01:24 PM

I have that same painted up wall in my house but its a pricess theme....no big deal!!!!!

BuiltByBrooks · 08-09-2009, 11:40 PM

got my bag plates cut, welded, and cleaned up. I'll post pics soon of them welded on once i get one more part...

Before

After

[

BuiltByBrooks · 08-15-2009, 09:03 PM

AceX · 08-15-2009, 11:02 PM

You should just leave the frame in bare metal and clear coat it. It would be a crime to cover that beautiful work up...

Mike Bradbury · 08-16-2009, 10:29 AM

From a welding instructor I would say you pass! Nice job. Not only on the welding but the fab. being a good welder is one thing but being able to engineer the whole thing is quite another trade in itself.
So we know that you have a syncro 250 and a model 3 bender. But what other tools do you use to fab those nice cuts. Your bag plates look very precise for a garage shop.

BuiltByBrooks · 08-16-2009, 10:55 AM

Quote:

Originally Posted by Mike Bradbury

From a welding instructor I would say you pass! Nice job. Not only on the welding but the fab. being a good welder is one thing but being able to engineer the whole thing is quite another trade in itself.
So we know that you have a syncro 250 and a model 3 bender. But what other tools do you use to fab those nice cuts. Your bag plates look very precise for a garage shop.

here is a picture of some of the things i have..

I need to get a shop soon..

ShowSS12 · 08-16-2009, 12:04 PM

Nice set-up.... is that a frame table that wheel is on?

BuiltByBrooks · 08-16-2009, 12:09 PM

Quote:

Originally Posted by ShowSS12

Nice set-up.... is that a frame table that wheel is on?

Thanks

Yea..

Naterman35 · 08-19-2009, 10:22 AM

Any recent activity?

BuiltByBrooks · 08-19-2009, 08:06 PM

Quote:

Originally Posted by Naterman35

Any recent activity?

Hopefully this weekend... Got a cool little somethin i'm going to do to the rear frame

digger61 · 08-20-2009, 03:08 AM

Hi Brooks! I cant beleive you are that tallented and that young, usually that quality comes with age and experience!!

I am very impressed with your work and hope you keep us up to date with progress. Cheers

BuiltByBrooks · 08-21-2009, 10:51 PM

Bazooka · 08-21-2009, 11:30 PM

You do some really nice work man..

Mike Bradbury · 08-22-2009, 10:16 AM

I didn't see a water jetter tucked in the corner of your garage. Maybe I missed it. I like the clear coat idea. are you going to paint or powder coat? As always looks awesome.

BuiltByBrooks · 08-22-2009, 12:26 PM

Quote:

Originally Posted by Mike Bradbury

I didn't see a water jetter tucked in the corner of your garage. Maybe I missed it. I like the clear coat idea. are you going to paint or powder coat? As always looks awesome.

Not sure yet, my mind changes to much.. I'll just have to wait until i get to that point i guess...

Thanks by the way!!

O, I have Nathan cut my stuff out at his shop

seldomseen65 · 08-22-2009, 08:38 PM

brooks are you still at it ,, i mean doing such great work i still can't believe it ,,keep up the good work OK,, larry

reedwesd · 08-25-2009, 02:07 AM

Awsome work.

Slmd92DIME · 08-29-2009, 12:11 AM

Very Very nice frame work.... Impressive

sweetnlow67 · 08-31-2009, 10:56 AM

its a shame all that work and beautful welds went on a toyota lol im just playin but seriously, id love to see what you could do with a c10

BuiltByBrooks · 08-31-2009, 04:26 PM

Quote:

Originally Posted by sweetnlow67

its a shame all that work and beautful welds went on a toyota lol im just playin but seriously, id love to see what you could do with a c10

Hopefully soon I'll be getting a Square Body Blazer to do up...

07-28-2009, 12:10 AM	#126
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: What do you guys think? thats __________________ CHEVY ONLY... Nothin Else !

07-28-2009, 06:01 AM	#127
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,133	Re: What do you guys think? ur a damn good welder, nice work!

07-29-2009, 06:37 AM	#129
DZL1 One day..... Join Date: Aug 2008 Location: Ocala, FL. Posts: 702	Re: What do you guys think? Man, you are a freak of nature! Thats all I can say. Incredible work. DZL1.

08-03-2009, 09:09 PM	#130
Naterman35 Registered User Join Date: Aug 2008 Location: Saginaw Michigan Posts: 199	Re: What do you guys think? God your gifted. I wish i was that gifted in ANYTHING. How did you get started? Id love to learn to TIG. I've tried but i was only able to us it for about an hour... so my welds... then ones i could actually start.. looked like crap. I was happy as can be to even get a puddle tho.

08-05-2009, 01:24 PM	#131
bmfpeterson Registered User Join Date: Jul 2008 Location: Queen Creek, AZ Posts: 538	Re: What do you guys think? I have that same painted up wall in my house but its a pricess theme....no big deal!!!!!

08-09-2009, 11:40 PM	#132
BuiltByBrooks Argon User Join Date: Oct 2008 Location: Qc, AZ Posts: 353	Re: What do you guys think? got my bag plates cut, welded, and cleaned up. I'll post pics soon of them welded on once i get one more part... Before After [ Last edited by BuiltByBrooks; 08-09-2009 at 11:40 PM.

08-15-2009, 09:03 PM	#133
BuiltByBrooks Argon User Join Date: Oct 2008 Location: Qc, AZ Posts: 353	Re: What do you guys think?

08-15-2009, 11:02 PM	#134
AceX >130dB Moderator Join Date: Aug 2006 Location: Sacramento, CA Posts: 2,130	Re: What do you guys think? You should just leave the frame in bare metal and clear coat it. It would be a crime to cover that beautiful work up... __________________ Living Life @ 130dB LED Tail Light Conversion; How-to Friend. Father. Brother. RIP El Jay ------------------------------------------------------------------------------------------------------------------------- CLICK HERE and for less than $0.07 a day, you too can help support and build a better forum.

08-16-2009, 10:29 AM	#135
Mike Bradbury Registered User Join Date: Apr 2008 Location: San Diego California Posts: 1,316	Re: What do you guys think? From a welding instructor I would say you pass! Nice job. Not only on the welding but the fab. being a good welder is one thing but being able to engineer the whole thing is quite another trade in itself. So we know that you have a syncro 250 and a model 3 bender. But what other tools do you use to fab those nice cuts. Your bag plates look very precise for a garage shop. __________________ I'd rather attempt something great and fail.. than try something ordinary and succeed. Norman Vincent Peale Project: Barn Raising http://67-72chevytrucks.com/vboard/s...d.php?t=414961 Project: 30 Be Low https://67-72chevytrucks.com/vboard/...d.php?t=830583

08-16-2009, 12:04 PM	#137
ShowSS12 Registered User Join Date: Apr 2008 Location: Sugarland,Tejas Posts: 356	Re: What do you guys think? Nice set-up.... is that a frame table that wheel is on? __________________ Adam M STX Designs Motorcycles \| Choppers \| Hotrods

08-19-2009, 10:22 AM	#139
Naterman35 Registered User Join Date: Aug 2008 Location: Saginaw Michigan Posts: 199	Re: What do you guys think? Any recent activity?

08-20-2009, 03:08 AM	#141
digger61 Registered User Join Date: Jul 2009 Location: ipswich, UK Posts: 16	Re: What do you guys think? Hi Brooks! I cant beleive you are that tallented and that young, usually that quality comes with age and experience!! I am very impressed with your work and hope you keep us up to date with progress. Cheers __________________ Been there , broke that!

08-21-2009, 10:51 PM	#142
BuiltByBrooks Argon User Join Date: Oct 2008 Location: Qc, AZ Posts: 353	Re: What do you guys think? Last edited by BuiltByBrooks; 08-21-2009 at 10:52 PM.

08-21-2009, 11:30 PM	#143
Bazooka Keepin it old school Join Date: Jul 2008 Location: Ca Posts: 672	Re: What do you guys think? You do some really nice work man..

08-22-2009, 10:16 AM	#144
Mike Bradbury Registered User Join Date: Apr 2008 Location: San Diego California Posts: 1,316	Re: What do you guys think? I didn't see a water jetter tucked in the corner of your garage. Maybe I missed it. I like the clear coat idea. are you going to paint or powder coat? As always looks awesome. __________________ I'd rather attempt something great and fail.. than try something ordinary and succeed. Norman Vincent Peale Project: Barn Raising http://67-72chevytrucks.com/vboard/s...d.php?t=414961 Project: 30 Be Low https://67-72chevytrucks.com/vboard/...d.php?t=830583



Register or Log In To remove these advertisements.

08-22-2009, 08:38 PM	#146
seldomseen65 spirit rider66 Join Date: Oct 2008 Location: pahrump, nevada, in the bowels of the Mojave desert Posts: 291	Re: What do you guys think? brooks are you still at it ,, i mean doing such great work i still can't believe it ,,keep up the good work OK,, larry __________________ :Chevy: If you don't run your own life,, some one else will. to our vets,, welcome home,, and thank you for your service.:Chevy:

08-25-2009, 02:07 AM	#147
reedwesd Registered User Join Date: Aug 2009 Location: Winchester TN Posts: 15	Re: What do you guys think? Awsome work.

08-29-2009, 12:11 AM	#148
Slmd92DIME Registered User Join Date: Mar 2007 Location: West Virginia Posts: 481	Re: What do you guys think? Very Very nice frame work.... Impressive __________________ My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=269019 Petitioning No Regrets MD/WV

08-31-2009, 10:56 AM	#149
sweetnlow67 Registered User Join Date: Jul 2008 Location: Pleasant Hill, Missouri Posts: 77	Re: What do you guys think? its a shame all that work and beautful welds went on a toyota lol im just playin but seriously, id love to see what you could do with a c10

Register or Log In To remove these advertisements.