8 bolt rims - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**jpgl** · 07-18-2018, 09:55 PM

want to put 2006 rims aluminum truck rims on a 1970 gmc 3/4 i tried on the rims they fit .want to know where i can buy nuts to fit that will allow me to use the factory caps.

geezer#99 · 07-19-2018, 08:24 AM

Ebay has some.
Your local parts place should too.
I’ve bought some from Napa.
https://www.ebay.com/sch/i.html?_fro...ts&_dcat=33749

Ask for dual threaded lugnuts.

Larry Weaver · 07-19-2018, 09:28 AM

Try EZaccessory.com, was cheaper than evry other place I tried.I think I had them in something like 4 days.

demian5 · 07-19-2018, 11:38 AM

My son has some extra (non-GM) aluminum wheels from his squarebody, he just upgraded to Methods.

The issue with the newer wheels (he had a set of 06 2500 aluminum's) the offset puts them in really far and close to the suspension. you may not like the look. You can get wheel spacers though that bolts onto your hubs and then you bolt the wheels onto the spacers.

**FirstOwner69** · 07-19-2018, 02:14 PM

Here's a thread with numerous pictures of different 8 lug wheels and links to lug nut sources.
http://67-72chevytrucks.com/vboard/s...d.php?t=330740

As stated above, the aluminum wheels you are thinking about use dual thread lug nuts. These wheels were used starting in 2001 and would have used metric lug nuts. You will find several eBay sellers who sell the SAE threaded versions in 9/16" and 1/2". If your 1970 truck has the original studs, you'll need 9/16" nuts.
https://www.ebay.com/itm/32-LUG-NUTS...sid=m570.l1313

07-18-2018, 09:55 PM	#1
jpgl Junior Member Join Date: May 2016 Location: Regina, Saskatchewan Posts: 83	8 bolt rims want to put 2006 rims aluminum truck rims on a 1970 gmc 3/4 i tried on the rims they fit .want to know where i can buy nuts to fit that will allow me to use the factory caps.

07-19-2018, 08:24 AM	#2
geezer#99 Registered User Join Date: Aug 2009 Location: Bowser Posts: 13,512	Re: 8 bolt rims Ebay has some. Your local parts place should too. I’ve bought some from Napa. https://www.ebay.com/sch/i.html?_fro...ts&_dcat=33749 Ask for dual threaded lugnuts.

07-19-2018, 09:28 AM	#3
Larry Weaver Registered User Join Date: Jul 2016 Location: Moravia ny Posts: 49	Re: 8 bolt rims Try EZaccessory.com, was cheaper than evry other place I tried.I think I had them in something like 4 days.

07-19-2018, 11:38 AM	#4
demian5 Registered User Join Date: Aug 2016 Location: Lake Forest, CA Posts: 2,177	Re: 8 bolt rims My son has some extra (non-GM) aluminum wheels from his squarebody, he just upgraded to Methods. The issue with the newer wheels (he had a set of 06 2500 aluminum's) the offset puts them in really far and close to the suspension. you may not like the look. You can get wheel spacers though that bolts onto your hubs and then you bolt the wheels onto the spacers. __________________ "Work hard, use your vacation days." 1970 C15 GMC Long Bed 1986 C20 Scottsdale 1983 K2500 Sierra Classic Suburban 6.2 Instagram: C10sofOC

07-19-2018, 02:14 PM	#5
FirstOwner69 Senior Member Join Date: May 2010 Location: Wisconsin & Arizona Posts: 4,839	Re: 8 bolt rims Here's a thread with numerous pictures of different 8 lug wheels and links to lug nut sources. http://67-72chevytrucks.com/vboard/s...d.php?t=330740 As stated above, the aluminum wheels you are thinking about use dual thread lug nuts. These wheels were used starting in 2001 and would have used metric lug nuts. You will find several eBay sellers who sell the SAE threaded versions in 9/16" and 1/2". If your 1970 truck has the original studs, you'll need 9/16" nuts. https://www.ebay.com/itm/32-LUG-NUTS...sid=m570.l1313



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.