Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
10-21-2020, 08:10 PM | #1 |
Registered User
Join Date: Mar 2019
Location: SAN RAMON
Posts: 73
|
Temp Sensor Question(s)
Finishing off my 350 Crate swap and noticed the sensor on my intake is damaged and needed replacement. I currently have what appears to be two temp sensors. The first pic is of the Driver’s side block sensor and that gives me a reading on my dash. No prob there.
The second pic is of the sensor that needs replacing on the intake. This activates the electric fan. My question is: There is only one wire currently attached and the replacement unit comes with two wires (3rd pic). There were no instructuons and I couldnt get a clear answer on the interweb haha. I know this: Keeping my engine at a safe temp is one of the most important things for my Classic. If anyone might have some guidance on which wire to use or any other options to consider, I thank you in advance for your take. Note: The fan switches are mounted right next to radiator behind the overflow and the Truck does have AC - if this changes anything. Thx again Fellas |
Bookmarks |
|
|