KS Parting a 72 custom camper now - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 10-05-2012, 07:42 AM

30

teeitup · 10-05-2012, 07:43 AM

335

teeitup · 10-05-2012, 07:45 AM

40

teeitup · 10-05-2012, 07:46 AM

44

teeitup · 10-05-2012, 07:47 AM

05005

teeitup · 10-05-2012, 07:48 AM

555

teeitup · 10-05-2012, 07:49 AM

600

teeitup · 10-05-2012, 07:50 AM

65

**DeadheadNM** · 10-05-2012, 08:37 AM

I'll take the aux box if not corroded (can I get the screws to attach also?) and oil line if the brass nut at the gauge end isn't rounded. Didn't realize the motor was a 2V so have to pass on the metal fuel line. If the choke fits a 4V Qjet I'll take it otherwise have to pass. Thanks for the pics. Shipping to 87110. Pete

Ozark Tim · 10-05-2012, 08:42 AM

Hey Randy,
Stainless camper mirrors and camper badges.
I'll take them if they arent sold or get in line for em.
Also need 2 frame brackets and rubber sway bar bushings if you have some.
ThanksTim

ronrob84 · 10-05-2012, 08:52 AM

I will take the sway bar & attached brackets shown in pics if it's to me

Vintage Windmills · 10-05-2012, 09:28 AM

Randy,

If any of those windshields are good, I could use a couple. also, do you have a dark green ashtray and any dark green doors in original paint? Also a GMC 2500 V eight driver quality emblem. I better make a list for when I'm there. Do you know the rim width on those 16's yet? looking for some 6.5 or 7 inch wide ones.

**jocko** · 10-05-2012, 09:45 AM

Copy 2 barrel Randy - no worries and thanks!

**cericd** · 10-05-2012, 09:52 AM

Hey Randy, could you show some pics of the lighter bezel? Does it have a light and the harness? Also, I'll take the handles if they aren't pitted and will clean up (light scratches are fine). Cost to ship to 77018?

Thanks

**burb71** · 10-05-2012, 12:36 PM

Randy I'll take the two small parts I asked about, Hose clamp & Junction box Do you still have the original screw or bolt that held the clamp?

Also I guess none of the windshields are 1967 -70 CST and have a good gasket?
If so I still need a good CST gasket

teeitup · 10-05-2012, 12:36 PM

DeadheadNM, Pete, sorry I didn't save the bolts that attached the aux box. Its real solid no rust at all. Oil line is good shape. Choke is diffferent I think. I will get quote this weekend

Ozark Tim, Tim, your 2nd on mirrors and I only have the 3 emblems and one of them has a broken stud, $20 for all them shpped. Sorry no separate sway bar frame brackets right now

ronrob84, It is yours for $65 shipped

Vintage, Jud, I have a couple good windshields I get $75 a piece for them. I don't have any green doors or ash trays or the GMC emblems. Not sure on wheels haven't got that far

Jocko, no problem

cericd, sorry I thought you only wanted lighter itself, I will get pics of bezel. I have wiring but no light. There is one guy ahead of you on outer door handles

Thanks Randy

teeitup · 10-05-2012, 12:43 PM

Burb 71, Steve, Sorry I didn't save the screw. $13 shipped for those 2 items. Sorry no good gaskets
Thanks Randy

Ozark Tim · 10-05-2012, 02:17 PM

Thanks Randy
I will wait and see if I wind up with the camper mirrors and if the badges are still avail I will pop on all of them.
Thanks Tim

dmw319 · 10-05-2012, 04:50 PM

How much for the door handles? Any pitting?

**too much stuff** · 10-05-2012, 05:30 PM

Thanks for the rad. pics randy. I think i will hold off for now, it looks like that one may be on the edge.
Eric

**celcius232** · 10-05-2012, 06:00 PM

Randy: The belts are not much better than the originals that I have in mine. What do you want for them shipped to 59601? Brian

teeitup · 10-05-2012, 08:30 PM

Just got home guys, so I will have to check out some of your questions Sat morn

Tim, sounds good, I have to get him a measurement so he can see if they are what he is lookin for

dmw319, your 3rd in line on them

Eric, no problem

Brian, $27 shipped oen of the mael plastic ends is cracked and 2 of the belts have issues

Thanks Randy

**71blksuper4x4** · 10-05-2012, 08:30 PM

Randy, what would it take to cut out the toolbox area from the bedside, and sell all the parts associated with it? Thinking about cutting one up to fit into a short bed like I have seen on here for the crew cab project. Thanks Trevor

teeitup · 10-05-2012, 08:34 PM

Trevor, not a whole lot of work, I can cut it out for you

**72 Super** · 10-05-2012, 08:40 PM

Randy, will you sale the engine lift hooks (mounted on intake)? what shape are the valve covers in?

thanks,
Ray

10-05-2012, 07:42 AM	#51
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 custom camper now 30 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-05-2012, 07:43 AM	#52
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 custom camper now 335 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-05-2012, 07:45 AM	#53
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 custom camper now 40 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-05-2012, 07:46 AM	#54
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 custom camper now 44 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-05-2012, 07:47 AM	#55
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 custom camper now 05005 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-05-2012, 07:48 AM	#56
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 custom camper now 555 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-05-2012, 07:49 AM	#57
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 custom camper now 600 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-05-2012, 07:50 AM	#58
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 custom camper now 65 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-05-2012, 08:37 AM	#59
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,297	Re: Parting a 72 custom camper now I'll take the aux box if not corroded (can I get the screws to attach also?) and oil line if the brass nut at the gauge end isn't rounded. Didn't realize the motor was a 2V so have to pass on the metal fuel line. If the choke fits a 4V Qjet I'll take it otherwise have to pass. Thanks for the pics. Shipping to 87110. Pete __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

10-05-2012, 08:42 AM	#60
Ozark Tim Registered User Join Date: Aug 2004 Location: Oakville, MO Posts: 1,018	Re: Parting a 72 custom camper now Hey Randy, Stainless camper mirrors and camper badges. I'll take them if they arent sold or get in line for em. Also need 2 frame brackets and rubber sway bar bushings if you have some. ThanksTim

10-05-2012, 08:52 AM	#61
ronrob84 Registered User Join Date: Jul 2012 Location: Springfield, MO Posts: 167	Re: Parting a 72 custom camper now I will take the sway bar & attached brackets shown in pics if it's to me __________________ RonRob 1972 C10 Driver--- http://67-72chevytrucks.com/vboard/s...d.php?t=544600 1971 SWB Build Thread--- http://67-72chevytrucks.com/vboard/s...d.php?t=546206 1988 Ford Mustang 5.0

10-05-2012, 09:28 AM	#62
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Parting a 72 custom camper now Randy, If any of those windshields are good, I could use a couple. also, do you have a dark green ashtray and any dark green doors in original paint? Also a GMC 2500 V eight driver quality emblem. I better make a list for when I'm there. Do you know the rim width on those 16's yet? looking for some 6.5 or 7 inch wide ones. __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

10-05-2012, 09:45 AM	#63
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,937	Re: Parting a 72 custom camper now Copy 2 barrel Randy - no worries and thanks!

10-05-2012, 09:52 AM	#64
cericd Senior Member Join Date: Jan 2012 Location: Texan, back in TX Posts: 2,101	Re: Parting a 72 custom camper now Hey Randy, could you show some pics of the lighter bezel? Does it have a light and the harness? Also, I'll take the handles if they aren't pitted and will clean up (light scratches are fine). Cost to ship to 77018? Thanks

10-05-2012, 12:36 PM	#65
burb71 Active Member Join Date: Oct 2002 Location: Ft. Myers, Fl Posts: 1,711	Re: Parting a 72 custom camper now Randy I'll take the two small parts I asked about, Hose clamp & Junction box Do you still have the original screw or bolt that held the clamp? Also I guess none of the windshields are 1967 -70 CST and have a good gasket? If so I still need a good CST gasket



Register or Log In To remove these advertisements.

10-05-2012, 12:43 PM	#67
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 custom camper now Burb 71, Steve, Sorry I didn't save the screw. $13 shipped for those 2 items. Sorry no good gaskets Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-05-2012, 02:17 PM	#68
Ozark Tim Registered User Join Date: Aug 2004 Location: Oakville, MO Posts: 1,018	Re: Parting a 72 custom camper now Thanks Randy I will wait and see if I wind up with the camper mirrors and if the badges are still avail I will pop on all of them. Thanks Tim

10-05-2012, 04:50 PM	#69
dmw319 Registered User Join Date: May 2012 Location: Raleigh, NC Posts: 639	Re: Parting a 72 custom camper now How much for the door handles? Any pitting? __________________ 1970 Chevy C-10 Stepside My build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=528167

10-05-2012, 05:30 PM	#70
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,709	Re: Parting a 72 custom camper now Thanks for the rad. pics randy. I think i will hold off for now, it looks like that one may be on the edge. Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

10-05-2012, 06:00 PM	#71
celcius232 Junior Member Join Date: Feb 2004 Location: Helena, Montana Posts: 67	Re: Parting a 72 custom camper now Randy: The belts are not much better than the originals that I have in mine. What do you want for them shipped to 59601? Brian

10-05-2012, 08:30 PM	#72
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 custom camper now Just got home guys, so I will have to check out some of your questions Sat morn Tim, sounds good, I have to get him a measurement so he can see if they are what he is lookin for dmw319, your 3rd in line on them Eric, no problem Brian, $27 shipped oen of the mael plastic ends is cracked and 2 of the belts have issues Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-05-2012, 08:30 PM	#73
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,149	Re: Parting a 72 custom camper now Randy, what would it take to cut out the toolbox area from the bedside, and sell all the parts associated with it? Thinking about cutting one up to fit into a short bed like I have seen on here for the crew cab project. Thanks Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

10-05-2012, 08:34 PM	#74
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 custom camper now Trevor, not a whole lot of work, I can cut it out for you __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-05-2012, 08:40 PM	#75
72 Super Senior Member Join Date: Jul 2001 Location: Hyattsville, Maryland Posts: 3,678	Re: Parting a 72 custom camper now Randy, will you sale the engine lift hooks (mounted on intake)? what shape are the valve covers in? thanks, Ray __________________ 72 Cheyenne Super (Purchased new by my parents in August of 71) Black and White

Register or Log In To remove these advertisements.