$ Advice for 72 short step (pics) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sixnine · 10-01-2007, 09:51 PM

This truck is near me. It was a no-sale on ebay @ $2000. I went and looked at the truck in person. Very straight, original, un-molested body. All panels fit well. It has the usual rust in the rockers and cab corners. It's a 6cyl, 3spd on the column. I offered $2300. The owner was honest and said he paid $3000 for it and didn't want to take that much of a loss. How much higher (if any) should I go? Is it worth much more than my original offer? Just curious.

BHRS · 10-01-2007, 10:03 PM

I guess it depends on how much you want it... Does it have any options or is it just a basic truck? Do you want to just have a driver or build a show truck? Do most trucks you have seen in your area have the same rust?

The big plus for me is the originality, original paint, it even has the stock hubcaps. Down side is the rust, six/3-speed, and probably no options like PS or PB.

If you are looking to install a SBC/auto, A/C, and some options how much do you want in it when it is "done"???

I wouldn't pay more than $2000 for it the way it sits.

Good Luck

tcb-1 · 10-01-2007, 10:07 PM

as a reference.....
I bought a 69 swb stepside with a rust free cab and bed, 84K miles, 350, 4 speed, bone stock and never touched Wyoming rig (thanks Drew67) for $3950.

your on target with $2300 for your example, but $3000 my be a little on the steep side. any optional equipment?

**FRENCHBLUE72** · 10-01-2007, 10:43 PM

How bad do you want it??? It is really that clean???

HeavyD · 10-01-2007, 10:50 PM

I'd gladly pay 2500 for it, but i'm from Canada, and swb anything is hard to find here. I don't think its a bad deal.

67_C-30 · 10-01-2007, 10:58 PM

If it's as straight as it looks $2500 should be fair. Keep in mind that being its a 72 it already has disc brakes. 90% of the people that buy '70 and earlier trucks incur the extra expense of adding disc brakes. If he won't budge off $3000, it depends on what else you find in your area. Even if you save a few bucks on a truck elsewhere, you have to keep in mind costs of delivery, etc. If you really feel good about the truck and want it, buy it. They are gaining in value every year, and if you keep it while and improve on its condition, I don't see you losing any money on it.

**Already Gone** · 10-02-2007, 04:44 AM

I think its good buy and if you smooze him a bit I'm sure you could get it for 2700/2800 ( if you want to go that high) but I'd come up from your 2300 offer to 2500 and then let him counter you from there.

sixnine · 10-04-2007, 09:32 PM

Just struck a deal on the truck! I offered $2500 he countered with $2600 - got it for $2550! I'm going to the bank tomorrow and will have the truck home by tomorrow evening. I'll post pics as soon as I can. I'm so freakin' excited!

68GMCCustom · 10-04-2007, 09:37 PM

congrats!

dan42 · 10-04-2007, 09:51 PM

That's great! And if I were you I would keep the six and the three speed - it gives the truck a lot of character. Have fun with it!

brianthelion02 · 10-04-2007, 10:38 PM

Not bad,have fun with it!!!!!!!!!

tcb-1 · 10-04-2007, 10:46 PM

congrats. welcome to the stepside club!!!

**Palf70Step** · 10-04-2007, 11:15 PM

Congratulations!!

**special-K** · 10-05-2007, 06:46 AM

I`d say for the purchase price and just get in and go,you can`t beat it.I`d like a driver like that.

Gray Ghost · 10-05-2007, 07:07 AM

Sweet truck. You got a good deal on that one!

**70cst** · 10-05-2007, 08:34 AM

Being a rust free truck you will save a lot of $$$$$ on rust repair. I say let the party begin!!

ChevyDude · 10-05-2007, 08:46 AM

Congratulations!! Drive it over to my shop in Northglenn, CO...Love to see it.... and there is two more trucks there for you to check out...a finished 71' Lil' Red, and a torn apart 68', project OverKill. I think you did well on the price!

GatorHyde of Denver
10650 Irma Dr. #24
Northglenn, CO 80233

69_hafton · 10-05-2007, 08:53 AM

Quote:

tcb-1: but $3000 may be a little on the "steep side".

No pun intended?

Sounds like you got a fair deal, and you'll be money ahead already having disk brakes up front. Had I found this board prior to buying I wouldn't have paid $2000 plus having mine shipped and then waiting 5 years to convert to disk this year. Oops, now I've told on myself

**Boog** · 10-05-2007, 09:04 AM

Considering where the pricing is these days on the trucks I think you did alright. Especially with the condition the truck's in. And it drives!
Don't know what your plans are for the truck but you have numerous options. You can clean it up and drive as is or run it through one of those quick paint places, Earl Schieb like for a shine up or go all the way with a complete rebuild. You did good.

Putter · 10-05-2007, 12:43 PM

Slam it
Slap on some lower-profile wider tires (keep the hubcaps)
And enjoy the Patina paint job!!!

68shortstep · 10-05-2007, 01:10 PM

Welcome to the "short - step" club. Looks like a great start on an unmolested nice original.

I would have bought it, too.

67_C-30 · 10-05-2007, 11:55 PM

Congrats! I was thinking when you originally posted this that if you really wanted one of these that it would be a good deal for you.

**Already Gone** · 10-06-2007, 01:41 AM

Quote:

Originally Posted by Already Gone

I think its good buy and if you smooze him a bit I'm sure you could get it for 2700/2800 ( if you want to go that high) but I'd come up from your 2300 offer to 2500 and then let him counter you from there.

Looks like you got a great buy. Hope I helped with my dealing suggestion!!

2bits · 10-06-2007, 01:48 AM

Good buy I say. +1 for originality for sure. Old age is easier to fix than someone else's rigging. +1 for disc brakes as well, that was a good catch mentioning that 67_C-30... Also looks like it has the rarer no-spare driver's rear fender too if I am seeing correctly... I like 'em personally, but those are rare and more "desirable" for resale if it ever came to that.

Botietruck · 10-06-2007, 05:28 AM

Hey, I like it! That was a good deal! Drive it for a year or two and you will grow very fond of it. When you do start rebuilding it you will always reflect back on how much you enjoyed driving it and that will motivate you to complete the project. Looks just like my '71 stepper. I added power steering before I tore it down for the rebuild and really enjoyed that.
Good luck and enjoy it!!

10-01-2007, 09:51 PM	#1
sixnine Longtime Member Join Date: Oct 2002 Location: Over Yonder (DFW) Posts: 171	$ Advice for 72 short step (pics) This truck is near me. It was a no-sale on ebay @ $2000. I went and looked at the truck in person. Very straight, original, un-molested body. All panels fit well. It has the usual rust in the rockers and cab corners. It's a 6cyl, 3spd on the column. I offered $2300. The owner was honest and said he paid $3000 for it and didn't want to take that much of a loss. How much higher (if any) should I go? Is it worth much more than my original offer? Just curious. __________________ Rokcrln - *"I'm a major car addict so trying to go as low buck as possible is like asking a coke head to use flower to save money."* 1972 C10 Short Step -http://67-72chevytrucks.com/vboard/s...d.php?t=261405

10-01-2007, 10:07 PM	#3
tcb-1 Nothing to see here..... Join Date: Jun 2007 Location: Shawnee, KS Posts: 4,625	Re: $ Advice for 72 short step (pics) as a reference..... I bought a 69 swb stepside with a rust free cab and bed, 84K miles, 350, 4 speed, bone stock and never touched Wyoming rig (thanks Drew67) for $3950. your on target with $2300 for your example, but $3000 my be a little on the steep side. any optional equipment?

10-01-2007, 10:43 PM	#4
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Re: $ Advice for 72 short step (pics) How bad do you want it??? It is really that clean??? __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

10-01-2007, 10:50 PM	#5
HeavyD Senior Member Join Date: Sep 2004 Location: Wakaw, Sask, Canada Posts: 3,170	Re: $ Advice for 72 short step (pics) I'd gladly pay 2500 for it, but i'm from Canada, and swb anything is hard to find here. I don't think its a bad deal. __________________ "You can take the man out of PA, but you can't take PA out of the man"

10-01-2007, 10:58 PM	#6
67_C-30 I have a radical idea! Join Date: Jan 2005 Location: Sweet Home Alabama! Posts: 6,513	Re: $ Advice for 72 short step (pics) If it's as straight as it looks $2500 should be fair. Keep in mind that being its a 72 it already has disc brakes. 90% of the people that buy '70 and earlier trucks incur the extra expense of adding disc brakes. If he won't budge off $3000, it depends on what else you find in your area. Even if you save a few bucks on a truck elsewhere, you have to keep in mind costs of delivery, etc. If you really feel good about the truck and want it, buy it. They are gaining in value every year, and if you keep it while and improve on its condition, I don't see you losing any money on it. __________________ '67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club!

10-01-2007, 10:03 PM	#2
BHRS Registered User Join Date: Sep 2007 Location: Wylie TEXAS Posts: 81	Re: $ Advice for 72 short step (pics) I guess it depends on how much you want it... Does it have any options or is it just a basic truck? Do you want to just have a driver or build a show truck? Do most trucks you have seen in your area have the same rust? The big plus for me is the originality, original paint, it even has the stock hubcaps. Down side is the rust, six/3-speed, and probably no options like PS or PB. If you are looking to install a SBC/auto, A/C, and some options how much do you want in it when it is "done"??? I wouldn't pay more than $2000 for it the way it sits. Good Luck __________________ 1972 Cheyenne C10 Unrestored Original-3 Owner-RUST FREE Texas Truck Big Block-TH400-PS-PB-AC-AM/FM Radio

10-02-2007, 04:44 AM	#7
Already Gone 70+ ( Old Skool Club ) Join Date: Nov 2003 Location: Saskatoon, Saskatchewan ,Canada Posts: 9,068	Re: $ Advice for 72 short step (pics) I think its good buy and if you smooze him a bit I'm sure you could get it for 2700/2800 ( if you want to go that high) but I'd come up from your 2300 offer to 2500 and then let him counter you from there. __________________ 1972 C10 Custom/Deluxe 613 Highlander 406/700R4 1999 White Tahoe LS 4x2 with Z56 Police Package 1992 K1500 GMC Suburban Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601 " Circumsatances Do Not Change Responsibility " " The Sky is not the Limit, Your Mind is." Marilyn Monroe .. RIP Charlie Watts 1941 - 2021

10-04-2007, 09:32 PM	#8
sixnine Longtime Member Join Date: Oct 2002 Location: Over Yonder (DFW) Posts: 171	Re: $ Advice for 72 short step (pics) Just struck a deal on the truck! I offered $2500 he countered with $2600 - got it for $2550! I'm going to the bank tomorrow and will have the truck home by tomorrow evening. I'll post pics as soon as I can. I'm so freakin' excited! __________________ Rokcrln - *"I'm a major car addict so trying to go as low buck as possible is like asking a coke head to use flower to save money."* 1972 C10 Short Step -http://67-72chevytrucks.com/vboard/s...d.php?t=261405

10-04-2007, 09:37 PM	#9
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: $ Advice for 72 short step (pics) congrats! __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

10-04-2007, 09:51 PM	#10
dan42 Registered User Join Date: Feb 2007 Location: Cali Central Coast Posts: 5,191	Re: $ Advice for 72 short step (pics) That's great! And if I were you I would keep the six and the three speed - it gives the truck a lot of character. Have fun with it! __________________ '67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD Click here to support the board Philippians 4: 6-7

10-04-2007, 10:38 PM	#11
brianthelion02 Overdrive club Join Date: Sep 2007 Location: apache junction, arizona Posts: 819	Re: $ Advice for 72 short step (pics) Not bad,have fun with it!!!!!!!!! __________________ 1971 c-10 1951 3100 chevy 1970 chevy c-30 Sold!

10-04-2007, 10:46 PM	#12
tcb-1 Nothing to see here..... Join Date: Jun 2007 Location: Shawnee, KS Posts: 4,625	Re: $ Advice for 72 short step (pics) congrats. welcome to the stepside club!!!

10-04-2007, 11:15 PM	#13
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,670	Re: $ Advice for 72 short step (pics) Congratulations!! __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

10-05-2007, 06:46 AM	#14
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: $ Advice for 72 short step (pics) I`d say for the purchase price and just get in and go,you can`t beat it.I`d like a driver like that. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

10-05-2007, 07:07 AM	#15
Gray Ghost Senior Member Join Date: Sep 2004 Location: Terrell, TX Posts: 1,967	Re: $ Advice for 72 short step (pics) Sweet truck. You got a good deal on that one! __________________ Kelly '05 GMC Sierra SLE Z71 Bone stock except for new bed rail caps.



Register or Log In To remove these advertisements.

10-05-2007, 08:34 AM	#16
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,339	Re: $ Advice for 72 short step (pics) Being a rust free truck you will save a lot of $$$$$ on rust repair. I say let the party begin!! __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

10-05-2007, 08:46 AM	#17
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	Re: $ Advice for 72 short step (pics) Congratulations!! Drive it over to my shop in Northglenn, CO...Love to see it.... and there is two more trucks there for you to check out...a finished 71' Lil' Red, and a torn apart 68', project OverKill. I think you did well on the price! GatorHyde of Denver 10650 Irma Dr. #24 Northglenn, CO 80233 __________________ Alex 1971 Lil' Red 350 SBC 700R4 Last edited by ChevyDude; 10-05-2007 at 08:49 AM.

10-05-2007, 09:04 AM	#19
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 12,978	Re: $ Advice for 72 short step (pics) Considering where the pricing is these days on the trucks I think you did alright. Especially with the condition the truck's in. And it drives! Don't know what your plans are for the truck but you have numerous options. You can clean it up and drive as is or run it through one of those quick paint places, Earl Schieb like for a shine up or go all the way with a complete rebuild. You did good. __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

10-05-2007, 12:43 PM	#20
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Re: $ Advice for 72 short step (pics) Slam it Slap on some lower-profile wider tires (keep the hubcaps) And enjoy the Patina paint job!!! __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

10-05-2007, 01:10 PM	#21
68shortstep Looks good at 20-ft ..... Join Date: Apr 2005 Location: Mtn Home, AR Posts: 707	Re: $ Advice for 72 short step (pics) Welcome to the "short - step" club. Looks like a great start on an unmolested nice original. I would have bought it, too. Attached Images

10-05-2007, 11:55 PM	#22
67_C-30 I have a radical idea! Join Date: Jan 2005 Location: Sweet Home Alabama! Posts: 6,513	Re: $ Advice for 72 short step (pics) Congrats! I was thinking when you originally posted this that if you really wanted one of these that it would be a good deal for you. __________________ '67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club!

10-06-2007, 01:48 AM	#24
2bits Registered User Join Date: Jan 2006 Location: Dallas Posts: 504	Re: $ Advice for 72 short step (pics) Good buy I say. +1 for originality for sure. Old age is easier to fix than someone else's rigging. +1 for disc brakes as well, that was a good catch mentioning that 67_C-30... Also looks like it has the rarer no-spare driver's rear fender too if I am seeing correctly... I like 'em personally, but those are rare and more "desirable" for resale if it ever came to that. __________________ _______________ Thomas '78 Silverado '74 Monte Carlo '47 Teardrop Trailer East Texas Classics Local Club Last edited by 2bits; 10-06-2007 at 01:51 AM.

10-06-2007, 05:28 AM	#25
Botietruck '71 chevy s.bed/s.side Join Date: Mar 2005 Location: Chesapeake, VA Posts: 1,571	Re: $ Advice for 72 short step (pics) Hey, I like it! That was a good deal! Drive it for a year or two and you will grow very fond of it. When you do start rebuilding it you will always reflect back on how much you enjoyed driving it and that will motivate you to complete the project. Looks just like my '71 stepper. I added power steering before I tore it down for the rebuild and really enjoyed that. Good luck and enjoy it!! __________________ STILL PLAYS WITH CARS...AND TRUCKS!! Parents! Be good to your kids...they get to choose your nursing home! 250 I-6 with a 3 speed Saginaw and Borg Warner Overdrive...She's got overdrive!

Register or Log In To remove these advertisements.