TX Parting 1991 Suburban, plus other misc. items, DFW* - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jonboy · 02-11-2010, 03:37 PM

I am parting out a 1991 Chevy Suburban, and have a few other misc. items I found in teh attic that need a new home. The Suburban arrived a little rough than I was expecting, so stuff will be cheap. It was hit in the rear, and cought something with the front crossmember.

1991 Suburban

complete front suspension- crossmember punched in center, arms out looks fine- $75

rear end (GU6, no G80)- $75

correct windows for power mirrors- $25 each, or $40 both

grey door panels (all 4)- $50

decent hood $40

clean left fender(actually from my '87, straightened and emblem holes filled) $35

drivers door shell $50

I have a lot of other small stuff, if you need it ask, and I will see if it is there or any good

I also have a few misc. items as well

Full gauge cluster from 1979 C10 (electric oil pressure gauge)- $50

full gauge cluster from 1977 Blazer (mech. oil pressure gauge) $50

non tilt column from 1979 C10- $25

I would prefer local pickup on the bigger stuff, may ship smaller stuff. If anone is local and wants to pull their won stuff, I wil make a deal. All prices do NOT include shipping, but it would be actual cost.

Feel free to make an offer on this stuff. Also let me know if there is anything you might need that is not listed. I have the truck at work, but have been told it has to go fairly soon.

This post will be edited when parts sell. If it is listed, I still have it.

**71blksuper4x4** · 02-11-2010, 03:42 PM

I am not sure if they are the same or not, but make sure to cut out the brackets from the floor for the bucket seats. It seems they are getting harder to come by for the 73+ crowd. Trevor

cobra!tx · 02-11-2010, 04:27 PM

decent fenders from 1977

Intrested in the drivers side-have a pic?I am in Plano
chip_regional@yahoo.com

Jonboy · 02-11-2010, 05:39 PM

Quote:

Originally Posted by cobra!tx

decent fenders from 1977

Intrested in the drivers side-have a pic?I am in Plano
chip_regional@yahoo.com

I will try to get some this weekend. They are over at a friend's shop, just need to get over there.

70BLAZERX2 · 02-11-2010, 05:41 PM

Member "Bigarmzz" on here is looking for a 90 or 91 burb instrument cluster..do you have the electric speedo cluster from this 91? Thanks

Jonboy · 02-11-2010, 06:33 PM

Cluster is already gone.

Slick17 · 02-12-2010, 01:33 AM

you have any pics of the grill, head lights and rad support. I'm interested in what it would be for shipping to 21755. email is lhmh2005@aol.com

bigarmzz · 02-12-2010, 08:09 AM

Quote:

Originally Posted by 70BLAZERX2

Member "Bigarmzz" on here is looking for a 90 or 91 burb instrument cluster..do you have the electric speedo cluster from this 91? Thanks

thanks for looking out man

i think i may have found one yesterday

bigarmzz · 02-12-2010, 08:10 AM

i'd be interested in your 91 chevrolet grille/bezels if there in really good shape

70BLAZERX2 · 02-12-2010, 09:25 AM

i knew you would be here ..LOL

**N2TRUX** · 02-12-2010, 08:57 PM

Jon does this have a 10 or 12 bolt rear?

bigblock73 · 02-12-2010, 09:32 PM

91 would be a 10 bolt

**N2TRUX** · 02-12-2010, 09:34 PM

Yeah I thought about it after I posted.

Jonboy · 02-12-2010, 09:41 PM

Yeah, it's a 10 bolt, 3.42 open. Doesn't your truck already have a 12 bolt?

ECU PIRATE · 02-15-2010, 12:45 PM

Too bad you are all the way in Texas. I could use those Blazer fenders for my 77'. If my cousin wasn't so lazy, I would tell him to drive over from north Dallas and pick them up. I am looking for some Siverado fender badges if you know anyone (with mounting studs intact). Any pics of the door panels

KazuyaIB · 02-15-2010, 01:00 PM

Sweet im going over to your place to see it and get some goodies

joe231 · 02-16-2010, 12:22 AM

I'm interested in the dash pad and instrument bezel.
I'll be looking forward to some pics

let me know if you wanna sell the grill and headlight trim seperate also

thanks!

givengold · 02-16-2010, 01:35 AM

I could use the headlight wiring from the firewall to plug into my 91 front end conversion. Let me know if this is possible and how much.
Dan

Blake_H · 02-16-2010, 01:53 AM

Are the door panels manual or powered? If they are manual, I would take them, shipped to 89509.

Thanks.

Blake_H · 02-16-2010, 02:23 AM

Quote:

Originally Posted by Blake_H

Are the door panels manual or powered? If they are manual, I would take them, shipped to 89509.

Thanks.

Before I get to crazy, could I see photos of the door panels? Also, do you have the visors, and what kind of shape are they in? Also do you have the carpet that goes on the bottom of the door?

Thanks.

Jonboy · 02-16-2010, 12:49 PM

Blake- door panels are power. Sorry. I will attach a couple of pictures of them and the carpet. The visors are the shorter foam/velour ones, but are peeling back at the centers.

Dan- I am trying to sell the radiator support as a whole with the harness/grille/bezels/lights, as a conversion type thing. If this falls through I will let you know.

Joe- The bezel has a bit out of it on the right side of the radio. Give me a shout when you come down, and you are welcome to it. Dash pad had a carpet over it. pulled it up, and there was a reason for it....

Jonboy · 02-16-2010, 01:05 PM

Pics for Joe...

68Timber · 02-16-2010, 01:27 PM

Wish I were closer, my Blazer needs some correct bucket seats.

joe231 · 02-16-2010, 08:21 PM

Quote:

Originally Posted by Jonboy

Pics for Joe...

Thanks man
I'm gonna keep looking around here.
Don't hold the stuff if you are able to sell it.
We will see what I need, and what you have left, by the time I make it to DFW.

bigarmzz · 02-17-2010, 12:19 AM

i'd be interested in that grille/bezels ...let me know

02-11-2010, 03:37 PM	#1
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Parting 1991 Suburban, plus other misc. items, DFW* I am parting out a 1991 Chevy Suburban, and have a few other misc. items I found in teh attic that need a new home. The Suburban arrived a little rough than I was expecting, so stuff will be cheap. It was hit in the rear, and cought something with the front crossmember. 1991 Suburban complete front suspension- crossmember punched in center, arms out looks fine- $75 rear end (GU6, no G80)- $75 correct windows for power mirrors- $25 each, or $40 both grey door panels (all 4)- $50 decent hood $40 clean left fender(actually from my '87, straightened and emblem holes filled) $35 drivers door shell $50 I have a lot of other small stuff, if you need it ask, and I will see if it is there or any good I also have a few misc. items as well Full gauge cluster from 1979 C10 (electric oil pressure gauge)- $50 full gauge cluster from 1977 Blazer (mech. oil pressure gauge) $50 non tilt column from 1979 C10- $25 I would prefer local pickup on the bigger stuff, may ship smaller stuff. If anone is local and wants to pull their won stuff, I wil make a deal. All prices do NOT include shipping, but it would be actual cost. Feel free to make an offer on this stuff. Also let me know if there is anything you might need that is not listed. I have the truck at work, but have been told it has to go fairly soon. This post will be edited when parts sell. If it is listed, I still have it. __________________ 1974 Jimmy- 5.3/4L80e/NP241 Last edited by Jonboy; 03-13-2010 at 01:58 AM. Reason: some parts sold

02-11-2010, 03:42 PM	#2
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,149	Re: Parting 1991 Suburban, plus other misc. items, DFW I am not sure if they are the same or not, but make sure to cut out the brackets from the floor for the bucket seats. It seems they are getting harder to come by for the 73+ crowd. Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

02-11-2010, 04:27 PM	#3
cobra!tx Registered User Join Date: Feb 2009 Location: Plano Texas Posts: 10	Re: Parting 1991 Suburban, plus other misc. items, DFW decent fenders from 1977 Intrested in the drivers side-have a pic?I am in Plano chip_regional@yahoo.com

02-11-2010, 05:41 PM	#5
70BLAZERX2 Registered User Join Date: Jan 2010 Location: GREENEVILLE TENNESSEE Posts: 1,311	Re: Parting 1991 Suburban, plus other misc. items, DFW Member "Bigarmzz" on here is looking for a 90 or 91 burb instrument cluster..do you have the electric speedo cluster from this 91? Thanks

02-11-2010, 06:33 PM	#6
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: Parting 1991 Suburban, plus other misc. items, DFW Cluster is already gone. __________________ 1974 Jimmy- 5.3/4L80e/NP241

02-12-2010, 01:33 AM	#7
Slick17 Registered User Join Date: Nov 2009 Location: Frederick, MD Posts: 158	Re: Parting 1991 Suburban, plus other misc. items, DFW you have any pics of the grill, head lights and rad support. I'm interested in what it would be for shipping to 21755. email is lhmh2005@aol.com __________________ 05 Chevy 3500 Crew Cab Dually Sold 1984 Custom Deluxe K/30, 350 SBC with 4 Speed, 6" Lift, 35" Boggers, Headmen Headers, Custom Full 3" Dual Exhaust, Qualitex Buckets with Flip Center Console

02-12-2010, 08:10 AM	#9
bigarmzz Registered User Join Date: Sep 2004 Location: Elkins, West Virginia Posts: 2,542	Re: Parting 1991 Suburban, plus other misc. items, DFW i'd be interested in your 91 chevrolet grille/bezels if there in really good shape __________________ 1987 350 TBI lowered 5/7

02-12-2010, 09:25 AM	#10
70BLAZERX2 Registered User Join Date: Jan 2010 Location: GREENEVILLE TENNESSEE Posts: 1,311	Re: Parting 1991 Suburban, plus other misc. items, DFW i knew you would be here ..LOL

02-12-2010, 08:57 PM	#11
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: Parting 1991 Suburban, plus other misc. items, DFW Jon does this have a 10 or 12 bolt rear? __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

02-12-2010, 09:32 PM	#12
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,826	Re: Parting 1991 Suburban, plus other misc. items, DFW 91 would be a 10 bolt __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

02-12-2010, 09:34 PM	#13
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: Parting 1991 Suburban, plus other misc. items, DFW Yeah I thought about it after I posted. __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

02-12-2010, 09:41 PM	#14
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: Parting 1991 Suburban, plus other misc. items, DFW Yeah, it's a 10 bolt, 3.42 open. Doesn't your truck already have a 12 bolt? __________________ 1974 Jimmy- 5.3/4L80e/NP241

02-15-2010, 12:45 PM	#15
ECU PIRATE Registered User Join Date: Apr 2009 Location: Centreville, Virginia Posts: 846	Re: Parting 1991 Suburban, plus other misc. items, DFW Too bad you are all the way in Texas. I could use those Blazer fenders for my 77'. If my cousin wasn't so lazy, I would tell him to drive over from north Dallas and pick them up. I am looking for some Siverado fender badges if you know anyone (with mounting studs intact). Any pics of the door panels __________________ The Fleet........ 68' Camaro - 1st car (restored & still have it) 09' VW Tiguan (Wife's Daily Driver) 14' VW Passat SE TSI (my personal) 14' Ford Edge Sport (Daily Work Vehicle) 73' SWB Stepside - 77K org. miles 74' LWB 454/TH400 - drive train transplant for my (Sold) 98' SWB C1500 W/T - shop truck (Sold) 90' GMC Sierra SLE short step - aka " Jezabelle " (Sold)

02-15-2010, 01:00 PM	#16
KazuyaIB Registered User Join Date: Oct 2009 Location: Dallas Posts: 43	Re: Parting 1991 Suburban, plus other misc. items, DFW Sweet im going over to your place to see it and get some goodies

02-16-2010, 12:22 AM	#17
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Parting 1991 Suburban, plus other misc. items, DFW I'm interested in the dash pad and instrument bezel. I'll be looking forward to some pics let me know if you wanna sell the grill and headlight trim seperate also thanks! __________________ *CHEVY ONLY*



Register or Log In To remove these advertisements.

02-16-2010, 01:35 AM	#18
givengold Registered User Join Date: Jul 2008 Location: Concord, CA Posts: 194	Re: Parting 1991 Suburban, plus other misc. items, DFW I could use the headlight wiring from the firewall to plug into my 91 front end conversion. Let me know if this is possible and how much. Dan

02-16-2010, 01:53 AM	#19
Blake_H Registered User Join Date: Oct 2009 Location: Redmond, OR Posts: 217	Re: Parting 1991 Suburban, plus other misc. items, DFW Are the door panels manual or powered? If they are manual, I would take them, shipped to 89509. Thanks.

02-16-2010, 12:49 PM	#21
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: Parting 1991 Suburban, plus other misc. items, DFW Blake- door panels are power. Sorry. I will attach a couple of pictures of them and the carpet. The visors are the shorter foam/velour ones, but are peeling back at the centers. Dan- I am trying to sell the radiator support as a whole with the harness/grille/bezels/lights, as a conversion type thing. If this falls through I will let you know. Joe- The bezel has a bit out of it on the right side of the radio. Give me a shout when you come down, and you are welcome to it. Dash pad had a carpet over it. pulled it up, and there was a reason for it.... Attached Images __________________ 1974 Jimmy- 5.3/4L80e/NP241 Last edited by Jonboy; 02-16-2010 at 01:19 PM.

02-16-2010, 01:05 PM	#22
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: Parting 1991 Suburban, plus other misc. items, DFW Pics for Joe... Attached Images __________________ 1974 Jimmy- 5.3/4L80e/NP241

02-16-2010, 01:27 PM	#23
68Timber I know the pieces fit Join Date: Nov 2007 Location: MONTGOMERY, AL Posts: 5,523	Re: Parting 1991 Suburban, plus other misc. items, DFW Wish I were closer, my Blazer needs some correct bucket seats. __________________ John 79 2wd Blazer (Bruiser) 85 M1009 Blazer (Sarge) build 74 Honda Z50 build

02-17-2010, 12:19 AM	#25
bigarmzz Registered User Join Date: Sep 2004 Location: Elkins, West Virginia Posts: 2,542	Re: Parting 1991 Suburban, plus other misc. items, DFW i'd be interested in that grille/bezels ...let me know __________________ 1987 350 TBI lowered 5/7

Register or Log In To remove these advertisements.