KS Pre Valentines 2014 67-72 trucks parts SPECIAL

[Brave71]

Randy, payment sent .. Pay pal .. Thanks Rick

[6t727t2]

Randy, can you add the kick panel vents 176 to my other stuff? Thanks, Harry

[69SCSS]

Hi Randy, do you happen to have to small strap that holds the parking brake cable to the handle on the 67-68 handle? It's the one that bolts to the bottom of the housing to hold the cable in place. I can't find the one I have for some reason! Also the one on the frame just in front of the hole to go inside the frame too if you have it.

Thanks, Al

[bguild]

Randy- Do you have a good heater control panel for the dash? good meaning the chrome outer. I don't care if the arms work as I plan to strip it to place a vintage air control panel in it. I just need the housing good and the chrome looking good.
If you have one can you post a pic and also provide cost with shipping to Kansas City Mo 64156.
Thank you

[teeitup]

Rick, got your money, I'm going to try to ship out Fri

Harry, I think those are sold, I have some other pass side AC vents out there

Al, sorry none right now

bguild, I have one I will get pics of it

Thanks Randy

[JimH2828]

Randy, a couple of items to close on and I'll make the PP payment.

1) Radio deluxe knobs, mount cups, nuts and dials (Post #12 pic 1)
2) Inside cab AC\Heater fiberglass boxe (Post #28 pic 2)
- how is the condition? Price?

Set Items
1) 2x radio\speaker green\black wires $10
2) 1x radio red wire $5
3) Boot rings and boot $25
4) Softray wing windows pair $20
5) 6x 72 door vent screws $20
6) Short gas filler $20
7) Air cleaner wing nut $0
8) Coiled oil pressure line $10
9) Pulley $8
10) 2x T-3 three prong bulbs $20
11) E-brake pedal setup $10
12) 2x Sets of Kick panel vent for AC Truck - $30
13) Blazer front to rear wiring harness $5
14) Med blue glove box door, hinge and open support brace $10
15) 2x Headlight cups $10
16) 1x Powerbeam headlight $10
17) 2x Duel horn wires $10
18) 2x fan shroud clips $10
19) AC boxes $40
20) Ground straps, steering column round firewall mount bracket, firewall flapper, green gear indicator, AC\heater core mount brackets $0


Thanks
Jim

[teeitup]

Jim, the only radio knobs/cups/nuts I have are with the 67 radio. I have a few inside AC boxes, do you need the heater core, if not I will throw one in the deal. It will probably take 2 boxes to ship it all. Also do you care if I cut off the wing windows right below the wing, it would save on shipping since it would cut down the size of box since they are so long. Thanks Randy

[JimH2828]

Randy,

1) Yup, the 67 radio knob set is the one I'm interested in. $?
2) Inside AC box, any good ones? sure I'll take a core if any are OK. $?

As many boxes as you need to use is fine.
Cutting the wing windows down is fine.

Thanks
Jim

[teeitup]

Jim, I have another guy asking about radio and knobs. he asked yesterday, so I need to give him first shot at all that, I will try to find out from him tonight. I can throw a core in too
Thanks Randy

[chipflyer]

this is the truck I just bought, don't laugh it was cheap!!!!!!

Geez Randy, what are the neighbors going to think......

I may have to come up and watch you try to tear that thing apart, bet you can't do it blindfolded like you can the 67-72 Chevys.

[teeitup]

that will be a problem Jeff, I wonder how many will ask me about the furd. I'm sure I will do some cussing tearing it apart, lol

[teeitup]

bguild, I have these 2, the top one has broken arm, the bottom one is pulled apart at bottom on back $25 shipped for either one

[chipflyer]

Seriously though, it doesn't look rusty and the grill looks good.

Jeff

[teeitup]

just the bed is rusty, front clip is pretty good, tailgate is good and so cab and drivers door

[sqweak]

don't know if the are still ava. but i notice you had the letters for the hood.. i need an E.. can you help him this for a 68 step side

[Oddfire]

OMG Randy are you serious????? A Ford? How many 8lb sledge hammers do you own? LOL Jamie 71 Longhorn

[teeitup]

sqweak, I'd rather sell them all together, sorry

Jamie, I got it bought worth the money (hopefully) I'm having trouble finding our years around here so I thought I'd try this (ONE TIME ONLY, Maybe) lol

Thanks Randy

[6t727t2]

Randy, ok, the best a/c cowl vent you have will do, Thanks, Harry

[teeitup]

Harry, I will get a pic on the best one I have left, Thanks Randy

[Jake1971]

I agree, an impressive array of nice parts! I am interested in several pending prices including shipping:
Blue visors pic 79-1
Pair of fleetside tail lights including lenses pic 60-1
Set of 6 SS/chrome bumper bolts pic 35-4
Battery hold-down clamp pic 60-1
Pair of headlight bezels 71-72 chevy pic 74-5

Also, do you have a true truck tilt column? I was working a deal with a guy in WA but he did not know how to tell the difference and sent a non-tilt column instead.
Thanks!
Paul

[crawley]

How much for a 67 glove box.. shipped to 89014. ...

[allchevy58]

Hi, on page 3 picture 61 it looks like a fender support for the bed. I need one for longbed fleetside bed. If you have one, how much shipped to 89508. Thanks

[Justintime67]

Looking back in the thread there was a pic of a couple of dash center sections. do you still have them?? I've been looking for one to fix the holes in mine.

[teeitup]

I've got the white 72 one left, it has a couple small screw holes in it if I remember right. I'll look at in a bit and get a pic, $20 plus shipping. Thanks Randy

[teeitup]

jake1971, Paul here is what I have, I have 2 sets of blue visors left, both are driver quality, they have some indentations and need cleaned