She's a ton of fun (dually build on air) - Page 17 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Rusbuilt · 02-27-2013, 01:47 PM

I think it depends on what year, I've seen them on both sides. It really doesn't matter to me though because I plan to run the hydraulic slave and I'll just run my lines.

**jkeating1** · 02-27-2013, 02:38 PM

That--and it may be driven by 2WD/4WD undercarriage, because of the shaft on the left
Posted via Mobile Device

**jkeating1** · 03-01-2013, 01:40 PM

Quote:

Originally Posted by Rusbuilt

I bought 4 of them today!! Hoot Hoot!

Ok---so it's been several days since you flashed those semi wheels in my face! I gotta have some now. What do you watch for--any 22" alloy semi wheel? Are there different mass 22's? Is there a good semi parts for sale forum? And how much should I have to pay for 4?
Posted via Mobile Device
Posted via Mobile Device

Rusbuilt · 03-01-2013, 03:32 PM

Quote:

Originally Posted by jkeating1

Ok---so it's been several days since you flashed those semi wheels in my face! I gotta have some now. What do you watch for--any 22" alloy semi wheel? Are there different mass 22's? Is there a good semi parts for sale forum? And how much should I have to pay for 4?
Posted via Mobile Device
Posted via Mobile Device

In my research I have discovered the best wheels to find are the 10 hole Alcoa wheels. They do come in different widths the ones I bought are 8.5" wide. I really wanted to find some that are 7.5" wide but these will work. I paid $100 per wheel and that's about as cheap as I have found them. You also must know it cost about $125 per wheel to have them milled from a 22.5" to a 22" and then you have to buy 8 to 10 lug adapters that will cost you around $800. So if you buy 6 aluminum Alcoa wheels $600 have them all milled $750 and buy adapters $800; you will have $2150 invested in just wheels and bolting them to your truck! It's not cheap but it will be worth it!!
Posted via Mobile Device

**jkeating1** · 03-01-2013, 04:48 PM

Thanks for that scoop! While you were posting that, I ran across a place that does the milling, etc., and your price guidelines run right about what he is. It helps to know that what he told me about what they do, and why, is exactly what you say. I might mention that he likes the steel adapter instead of cast iron. Of course he likes it because that's what he sells. But actually, it sounded like he has handled both.

These aren't Alcoas, but what do you think about the bigger holes? These are just an example--as I look for some, I might run across anything.

**jkeating1** · 03-01-2013, 04:51 PM

Better pic of steel adapter

5150 · 03-01-2013, 05:13 PM

I know where some 18 inch 10 holes are.
Posted via Mobile Device

Rusbuilt · 03-01-2013, 05:55 PM

I think the big holes have a cool look.

Bryan do you mean 10 hole or 10 lug?
Posted via Mobile Device

5150 · 03-01-2013, 06:55 PM

10 lug, sorry.
Posted via Mobile Device

Rusbuilt · 03-02-2013, 12:20 AM

Quote:

Originally Posted by 5150

10 lug, sorry.
Posted via Mobile Device

Idk if I've ever seen an 10 lug 18" wheel! Can you get a pic?

502ms · 03-02-2013, 08:48 AM

Ready for some action
Posted via Mobile Device

**lolife99** · 03-02-2013, 10:28 AM

I like this website:
http://www.tnwheelandtire.com/site/769454/page/923583

I also like their wheel adapters better than the ones you posted.
They are front and rear specific.

5150 · 03-02-2013, 11:23 AM

Quote:

Idk if I've ever seen an 10 lug 18" wheel! Can you get a pic?

They are off of a motorhome. I'm over in your old neck of the woods for the day. They are at board member Woodridge's place up in Maynardville. I'll see if I can get a pic.
Posted via Mobile Device

Rusbuilt · 03-02-2013, 06:12 PM

Quote:

Originally Posted by lolife99

I like this website:
http://www.tnwheelandtire.com/site/769454/page/923583

I also like their wheel adapters better than the ones you posted.
They are front and rear specific.

Keith those are the adapters I plan to use! Jk had posted the ones above. TN wheel and tire will be milling my wheels also.
Posted via Mobile Device

**lolife99** · 03-02-2013, 06:26 PM

Quote:

Originally Posted by Rusbuilt

Keith those are the adapters I plan to use! Jk had posted the ones above. TN wheel and tire will be milling my wheels also.
Posted via Mobile Device

Cool.
I see the used 22.5's on Craigslist, but people want crazy prices for them around here.

Rusbuilt · 03-02-2013, 06:33 PM

Yeah I lucked up on these 4 I bought. I think I have a line on the other two I need also!!
Posted via Mobile Device

**lolife99** · 03-02-2013, 06:57 PM

Cool.
I know you wanted the 7.5" version,... but a 265/35-22 tire, will fit better on a 8.5" wide wheel.

Rusbuilt · 03-02-2013, 09:40 PM

Thats true, I had considered my tire height but not the width.

ThreeQtr · 03-03-2013, 09:52 AM

Not to keep posting pics of other trucks, but maybe some one with photoshop could lower this to get a better idea of the look your after. At least its blue.

Rusbuilt · 03-03-2013, 11:57 PM

I like that truck, I've seen a few pics of it on here!

**jkeating1** · 03-04-2013, 12:21 AM

thats an interesting photo---the gas filler neck is in the shot, indicating the pic is reversed, yet the "pods" logo is not reversed.

ThreeQtr · 03-04-2013, 07:49 AM

You noticed, I did reverse it (forget why) and the pods sign. I also used the trees to cover a house being built in the background. But I only have Paint, which takes alot to piece the wheels together. As far as I know it's the only way to get a lowered look with Paint (tucking them up into the wheelwells).

JRANGER · 03-04-2013, 10:45 AM

Here ya go...Not perfect but

Rusbuilt · 03-04-2013, 04:40 PM

Bags all the way! I can't wait!

5150 · 03-07-2013, 07:58 PM

Here you go Rus, sorry for the delay 18x6's

02-27-2013, 01:47 PM	#401
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: She's a ton of fun (dually build on air) I think it depends on what year, I've seen them on both sides. It really doesn't matter to me though because I plan to run the hydraulic slave and I'll just run my lines. __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*

02-27-2013, 02:38 PM	#402
jkeating1 Senior Member Join Date: Dec 2012 Location: Allen, TX Posts: 519	Re: She's a ton of fun (dually build on air) That--and it may be driven by 2WD/4WD undercarriage, because of the shaft on the left Posted via Mobile Device __________________ JK

03-01-2013, 04:48 PM	#405
jkeating1 Senior Member Join Date: Dec 2012 Location: Allen, TX Posts: 519	Re: She's a ton of fun (dually build on air) Thanks for that scoop! While you were posting that, I ran across a place that does the milling, etc., and your price guidelines run right about what he is. It helps to know that what he told me about what they do, and why, is exactly what you say. I might mention that he likes the steel adapter instead of cast iron. Of course he likes it because that's what he sells. But actually, it sounded like he has handled both. These aren't Alcoas, but what do you think about the bigger holes? These are just an example--as I look for some, I might run across anything. Attached Images __________________ JK

03-01-2013, 04:51 PM	#406
jkeating1 Senior Member Join Date: Dec 2012 Location: Allen, TX Posts: 519	Re: She's a ton of fun (dually build on air) Better pic of steel adapter Attached Images __________________ JK

03-01-2013, 05:13 PM	#407
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,279	Re: She's a ton of fun (dually build on air) I know where some 18 inch 10 holes are. Posted via Mobile Device __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

03-01-2013, 05:55 PM	#408
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: She's a ton of fun (dually build on air) I think the big holes have a cool look. Bryan do you mean 10 hole or 10 lug? Posted via Mobile Device __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*

03-01-2013, 06:55 PM	#409
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,279	Re: She's a ton of fun (dually build on air) 10 lug, sorry. Posted via Mobile Device __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

03-02-2013, 08:48 AM	#411
502ms Registered User Join Date: Aug 2011 Location: Atlanta, GA Posts: 1,523	Re: She's a ton of fun (dually build on air) Ready for some action Posted via Mobile Device __________________ Best Regards, Leon M. Instagram: @TheDirtyDianah Bagged \| 6.0L LS \| T-56 (6-Speed Manual) \| Turbo Burnout/Rolling Video: Chevy C10 Stepside 6.0L LSx & 6-Speed Manual

03-02-2013, 10:28 AM	#412
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,684	Re: She's a ton of fun (dually build on air) I like this website: http://www.tnwheelandtire.com/site/769454/page/923583 I also like their wheel adapters better than the ones you posted. They are front and rear specific. Attached Images __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

03-02-2013, 06:33 PM	#416
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: She's a ton of fun (dually build on air) Yeah I lucked up on these 4 I bought. I think I have a line on the other two I need also!! Posted via Mobile Device __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*

03-02-2013, 06:57 PM	#417
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,684	Re: She's a ton of fun (dually build on air) Cool. I know you wanted the 7.5" version,... but a 265/35-22 tire, will fit better on a 8.5" wide wheel. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

03-02-2013, 09:40 PM	#418
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: She's a ton of fun (dually build on air) Thats true, I had considered my tire height but not the width. __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*

03-03-2013, 09:52 AM	#419
ThreeQtr Registered User Join Date: Dec 2010 Location: Port St Lucie,FL Posts: 203	Re: She's a ton of fun (dually build on air) Not to keep posting pics of other trucks, but maybe some one with photoshop could lower this to get a better idea of the look your after. At least its blue. Attached Images

03-03-2013, 11:57 PM	#420
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: She's a ton of fun (dually build on air) I like that truck, I've seen a few pics of it on here! __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*

03-04-2013, 12:21 AM	#421
jkeating1 Senior Member Join Date: Dec 2012 Location: Allen, TX Posts: 519	Re: She's a ton of fun (dually build on air) thats an interesting photo---the gas filler neck is in the shot, indicating the pic is reversed, yet the "pods" logo is not reversed. __________________ JK



Register or Log In To remove these advertisements.

03-04-2013, 07:49 AM	#422
ThreeQtr Registered User Join Date: Dec 2010 Location: Port St Lucie,FL Posts: 203	Re: She's a ton of fun (dually build on air) You noticed, I did reverse it (forget why) and the pods sign. I also used the trees to cover a house being built in the background. But I only have Paint, which takes alot to piece the wheels together. As far as I know it's the only way to get a lowered look with Paint (tucking them up into the wheelwells).

03-04-2013, 10:45 AM	#423
JRANGER Registered User Join Date: Nov 2011 Location: Nashville TN Posts: 3,595	Re: She's a ton of fun (dually build on air) Here ya go...Not perfect but Attached Images __________________ PLEASE HELP WITH PROJECT UNDERHAULIN http://67-72chevytrucks.com/vboard/showthread.php?t=306320 Gemini - 1978 GMC C15 High Sierra - 305 c/e - Given to Mother Electra - 1967 Mustang Coupe - 302/w 3 speed Build Chyna - 1968 Chevy C20 Long Stepper

03-04-2013, 04:40 PM	#424
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: She's a ton of fun (dually build on air) Bags all the way! I can't wait! __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*

03-07-2013, 07:58 PM	#425
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,279	Re: She's a ton of fun (dually build on air) Here you go Rus, sorry for the delay 18x6's __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

Register or Log In To remove these advertisements.