pics of lwb trucks lowered or bagged - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Swifty · 01-05-2009, 09:46 PM

IvelDesigns, I can't even tell your truck is LWB in the pic. it looks super clean!

I have a LWB 3/4 ton & i can't decide if i want to bag it or not because it is so big.

chevydog66 · 01-05-2009, 10:11 PM

How about a GMC? 1 pic with 18's, 1 pic with 20's. Keep in mind that it still has the leaf springs in the rear, it is bagged in the front, until this spring and then it will be on a Chevy frame.

pissonNOS · 01-05-2009, 10:11 PM

i cant believe it but this is the only pic i have on this computer of my truck bagged

texastrendz · 01-05-2009, 11:16 PM

hey pisson nos, what setup are you running in the rear. is factory trailing arms or not. thanks

straitnate14 · 01-05-2009, 11:16 PM

This is my truck with 2 in the back to level it out does that count?

Jcentsr6 · 01-06-2009, 12:15 AM

Whats up with a Trany cross member and raised trailing arms?

I didnt think you needed it in a lwb?

texastrendz · 01-06-2009, 12:17 AM

if you want to put it on the frame you do? i want it low as it will go without a drop member. i think i am going to z mine instead of a dropmember.

Jcentsr6 · 01-06-2009, 12:19 AM

cool. thanks for the info.

texastrendz · 01-06-2009, 12:25 AM

i was kinda asking the question at the same time, the crossmember in my lwb hangs below the frame rails, does yours not, hope i did not waste my money on the crossmember, for one i have to figure out the carrier bearing and two thats alot of rivets, maybe someone else will jump in and help us both out with our questions, any help would be great thanks

pissonNOS · 01-06-2009, 03:31 PM

Quote:

Originally Posted by texastrendz

hey pisson nos, what setup are you running in the rear. is factory trailing arms or not. thanks

stock trailing arms with a 2 1/2" block and c notches

royo · 01-06-2009, 04:51 PM

Man i like them longbeds

as of 12/26/09

65panelrat · 01-06-2009, 05:48 PM

72' C10 LWB, 4" Drop Coils Rear / 3" Drop Coils Front!

kcjones · 01-06-2009, 06:11 PM

Quote:

Originally Posted by texastrendz

if you want to put it on the frame you do? i want it low as it will go without a drop member. i think i am going to z mine instead of a dropmember.

Z-ing is no small thing, man! Not for the weak of heart, requires all kinds of math and mods with stearing, body, etc. Drop member solves all of that.

Here's my 4.5/6 LWB:

Name: 20081127101_2.jpg
Views: 6006
Size: 38.7 KB

Name: 20081127101_2.jpg
Views: 6006
Size: 38.7 KB

Name: ATT108586.jpg
Views: 5996
Size: 41.0 KB

Name: ATT98641.jpg
Views: 5963
Size: 49.9 KB

texastrendz · 01-06-2009, 07:17 PM

what size tire are you running on you wheel vintique wheels, just got mine in the 66 series, i think the same you got just not chrome, thanks

C20_Paul · 01-06-2009, 07:43 PM

Here is mine. 1967 C-20 lowered 2/4 with drop springs. I am running 265/70/r17's which are close to rubbing in a couple places. Since I didn't do drop spindles I had to trim my bump stops so I would have more than 2 inches of suspension travel.

And for what it is worth, my house is no longer pink. I remedied that problem as quickly as I could.

kcjones · 01-06-2009, 08:14 PM

Quote:

Originally Posted by texastrendz

what size tire are you running on you wheel vintique wheels, just got mine in the 66 series, i think the same you got just not chrome, thanks

17x9w/5bs in the rear, 17x9w/4bs front, 275/55/17 rear, 255/50/17 front. Wish I would have skipped the chrome, done silver and installed the vette rings and cap, but I still like them.

yotaforce · 01-06-2009, 08:26 PM

Quote:

Originally Posted by straitnate14

This is my truck with 2 in the back to level it out does that count?

I want to know about that Duster in the driveway!!!

michael bagby · 01-06-2009, 08:28 PM

Quote:

Originally Posted by Bob 68327

Yup it was pretty tall for a 1/2 ton wasn't it . I lowered it 10'' from stock. It may not seem that low but compared to what I started with it looks like I dropped it off the house!

Bob

i hear ya work with what you got looks good before - after

Bob 68327 · 01-06-2009, 08:58 PM

Quote:

Originally Posted by michael bagby

i hear ya work with what you got looks good before - after

Thanks I 'm real happy with it .
Bob

Dr. Evil · 01-06-2009, 09:04 PM

Quote:

Originally Posted by 65panelrat

72' C10 LWB, 4" Drop Coils Rear / 3" Drop Coils Front!

Your truck is gorgeous, I love the stance. I have a 1970 gmc Sierra Grande, I would like to do the same. What company and system did you use. How was the alignment and are there any issues that you encountered that would help me with my planned lowering of my truck. ?
Any thing would help, Thanks.

AlienYouth · 01-06-2009, 09:04 PM

couple pics of my baby...

chevydog66 · 01-06-2009, 11:38 PM

Yep, that's how I like 'em, Long and Low.

custom72c20 · 01-07-2009, 12:31 AM

Here's mine before I put it back to stock.

daveo68 · 01-07-2009, 06:34 PM

This is mine 2/4 drop springs:

**CMACDONALD1** · 01-07-2009, 07:12 PM

sorry for the poor pics but here is my 68 lwb

01-05-2009, 09:46 PM	#26
Swifty Registered User Join Date: Apr 2008 Location: East WA Posts: 243	Re: pics of lwb trucks lowered or bagged IvelDesigns, I can't even tell your truck is LWB in the pic. it looks super clean! I have a LWB 3/4 ton & i can't decide if i want to bag it or not because it is so big.

01-05-2009, 10:11 PM	#27
chevydog66 GM ONLY BABY!!! Join Date: Oct 2003 Location: Fort Wayne, IN. Posts: 1,998	Re: pics of lwb trucks lowered or bagged How about a GMC? 1 pic with 18's, 1 pic with 20's. Keep in mind that it still has the leaf springs in the rear, it is bagged in the front, until this spring and then it will be on a Chevy frame. Attached Images __________________ 2 wrongs don't make a right, but 3 lefts do. 66 Chevelle Malibu 406ci, 573hp, 10.99@121mph 96 Chevy Silverado Z71 72 GMC 1500 Super Custom LS 6.0/4L65 on airride http://www.cardomain.com/ride/707879...mc-c-k-pick-up Last edited by chevydog66; 01-05-2009 at 10:14 PM.

01-05-2009, 10:11 PM	#28
pissonNOS senior member Join Date: Feb 2003 Location: fort macleod alberta Posts: 2,770	Re: pics of lwb trucks lowered or bagged i cant believe it but this is the only pic i have on this computer of my truck bagged Attached Images __________________ 69 GMC bagged

01-05-2009, 11:16 PM	#29
texastrendz Registered User Join Date: Jan 2008 Location: HOUSTON TX Posts: 1,161	Re: pics of lwb trucks lowered or bagged hey pisson nos, what setup are you running in the rear. is factory trailing arms or not. thanks

01-05-2009, 11:16 PM	#30
straitnate14 Registered User Join Date: Feb 2008 Location: Bartonville IL Posts: 415	Re: pics of lwb trucks lowered or bagged This is my truck with 2 in the back to level it out does that count? __________________ ΜΟΛΩΝ ΛΑΒΕ Last edited by straitnate14; 01-05-2009 at 11:18 PM.

01-06-2009, 12:15 AM	#31
Jcentsr6 Junior Member Join Date: Jul 2007 Location: Odenton, Md Posts: 552	Re: pics of lwb trucks lowered or bagged Whats up with a Trany cross member and raised trailing arms? I didnt think you needed it in a lwb? __________________ going to sell this one...looking for a SWB project next.

01-06-2009, 12:17 AM	#32
texastrendz Registered User Join Date: Jan 2008 Location: HOUSTON TX Posts: 1,161	Re: pics of lwb trucks lowered or bagged if you want to put it on the frame you do? i want it low as it will go without a drop member. i think i am going to z mine instead of a dropmember.

01-06-2009, 12:19 AM	#33
Jcentsr6 Junior Member Join Date: Jul 2007 Location: Odenton, Md Posts: 552	Re: pics of lwb trucks lowered or bagged cool. thanks for the info. __________________ going to sell this one...looking for a SWB project next.

01-06-2009, 12:25 AM	#34
texastrendz Registered User Join Date: Jan 2008 Location: HOUSTON TX Posts: 1,161	Re: pics of lwb trucks lowered or bagged i was kinda asking the question at the same time, the crossmember in my lwb hangs below the frame rails, does yours not, hope i did not waste my money on the crossmember, for one i have to figure out the carrier bearing and two thats alot of rivets, maybe someone else will jump in and help us both out with our questions, any help would be great thanks

01-06-2009, 04:51 PM	#36
royo Registered User Join Date: Feb 2007 Location: knoxville tn Posts: 1,013	Re: pics of lwb trucks lowered or bagged Man i like them longbeds as of 12/26/09 __________________ nickle and dime Last edited by royo; 12-26-2009 at 06:51 AM.

01-06-2009, 05:48 PM	#37
65panelrat Registered User Join Date: Aug 2008 Location: Rio Rancho, New Mexico Posts: 211	Re: pics of lwb trucks lowered or bagged 72' C10 LWB, 4" Drop Coils Rear / 3" Drop Coils Front! Attached Images __________________ Bowties For Life!🇺🇸

01-06-2009, 07:17 PM	#39
texastrendz Registered User Join Date: Jan 2008 Location: HOUSTON TX Posts: 1,161	Re: pics of lwb trucks lowered or bagged what size tire are you running on you wheel vintique wheels, just got mine in the 66 series, i think the same you got just not chrome, thanks

01-06-2009, 07:43 PM	#40
C20_Paul Registered User Join Date: Jul 2007 Location: Portland, OR Posts: 35	Re: pics of lwb trucks lowered or bagged Here is mine. 1967 C-20 lowered 2/4 with drop springs. I am running 265/70/r17's which are close to rubbing in a couple places. Since I didn't do drop spindles I had to trim my bump stops so I would have more than 2 inches of suspension travel. And for what it is worth, my house is no longer pink. I remedied that problem as quickly as I could. Attached Images

01-06-2009, 09:04 PM	#46
AlienYouth Registered User Join Date: Apr 2007 Location: Westminster, Maryland Posts: 411	Re: pics of lwb trucks lowered or bagged couple pics of my baby... __________________ Picturesss 71 C10 383/TH400 13.65 @ 99... 2.06 60' spinnin :/

01-06-2009, 11:38 PM	#47
chevydog66 GM ONLY BABY!!! Join Date: Oct 2003 Location: Fort Wayne, IN. Posts: 1,998	Re: pics of lwb trucks lowered or bagged Yep, that's how I like 'em, Long and Low. __________________ 2 wrongs don't make a right, but 3 lefts do. 66 Chevelle Malibu 406ci, 573hp, 10.99@121mph 96 Chevy Silverado Z71 72 GMC 1500 Super Custom LS 6.0/4L65 on airride http://www.cardomain.com/ride/707879...mc-c-k-pick-up



Register or Log In To remove these advertisements.

01-07-2009, 12:31 AM	#48
custom72c20 Registered User Join Date: Oct 2006 Location: Temecula,CA Posts: 309	Re: pics of lwb trucks lowered or bagged Here's mine before I put it back to stock. __________________ Nick Old pic of my 72: http://img340.imageshack.us/my.php?image=img0435co5.jpg 04 Silverado Daily Driver 68 GMC short step http://67-72chevytrucks.com/vboard/s...d.php?t=379665 "I'll beat you to the gas station!!"

01-07-2009, 06:34 PM	#49
daveo68 Senior Member Join Date: Dec 2001 Location: Lexington,NC Posts: 503	Re: pics of lwb trucks lowered or bagged This is mine 2/4 drop springs: Attached Images __________________ 68 C-10 Custom LWB 307 V8 Lexington,NC davideowens@lexcominc.net God Bless America

01-07-2009, 07:12 PM	#50
CMACDONALD1 Senior Member Join Date: Jun 2007 Location: Red Deer Ab Canada Posts: 756	Re: pics of lwb trucks lowered or bagged sorry for the poor pics but here is my 68 lwb Attached Images __________________ 1966 427 biscayne with a 5 spd tremec on old school torque thrusts. 1972 Cheyenne Short Bed 1958 Apache short fleet 1980 Chevy short bed http://67-72chevytrucks.com/vboard/s...d.php?t=761005 1959 "Henry" http://67-72chevytrucks.com/vboard/s...d.php?t=670461 1966 Biscayne http://67-72chevytrucks.com/vboard/s...d.php?t=444419 1972 Suburban http://67-72chevytrucks.com/vboard/s...d.php?t=478828

Register or Log In To remove these advertisements.