The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Engine & Drivetrain > LSx Swaps

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 01-30-2019, 04:38 PM   #1
Rabid Anti-Dentite
Registered User
 
Join Date: Mar 2016
Location: Fort Worth, TX
Posts: 58
New LS Standalone Harness

Not sure if this was allowed, and I do not endorse nor work for these sellers, but I was looking on eBay for a 5.3 standalone harness or rework, and all of the new harnesses look exactly the same, and sell for $349 + or so. Figuring that they all came from China, I hoped on Alibaba and did a little searching and chatting. Turns out there is only one manufacture in China that makes this harness, and they sell to everyone that carries it. When I asked about pricing, she told me $268 shipped for 1, or if I order 10 or more, the price goes to $240. She did say that she can customize the harness to any spec I wanted, whether that was added or removing sensors or trans and lengthen/shorten the ECM leads. So I ordered one for $268, figuring I will save about $100 vs eBay. I will do a review on it when I receive it.

Anyways, here is a link if anyone is interested:
https://www.alibaba.com/product-deta...52c38538gfq5ON
Rabid Anti-Dentite is offline   Reply With Quote
Old 01-30-2019, 05:04 PM   #2
sweetk30
Registered User
 
sweetk30's Avatar
 
Join Date: May 2012
Location: horseheads,ny rust belt
Posts: 2,794
Re: New LS Standalone Harness

__________________
77-k30lb BIG truck build .
87-k30lb budget beater build .
85-k30lb the plow machine build .
85-c10sb summer fun toy .
-----------------------------
HOLLEY SNIPER efi = worst case of p.i.t.a i ever had .

EDELBROCK pro flo 4 = best deal going so far . love my setup works great.
sweetk30 is offline   Reply With Quote
Old 01-31-2019, 10:10 AM   #3
solidaxel
Registered User
 
solidaxel's Avatar
 
Join Date: Dec 2002
Location: Cactus Patch So. Az
Posts: 4,749
Re: New LS Standalone Harness

Quote:
Originally Posted by sweetk30 View Post
Yea me too !
__________________
53 TuTone Extended Cab 350 4-Spd 3:08 (SOLD)
53 Chevy Moldy pearl green ZZ-4 4L60E 9" 3:25
55 GMC 1st Black Mll (ZZ4) ZZ6 TKO 600 5 sp 3:73
62 Solidaxle Corvette Roman Red (327
340hp 4spd 3:36) C4 & C5 suspension tube chassis
LS 3 4L70E
65 Corvette Coupe 327 350hp 4spd 4:11
78 Black Silverado SWB (350/350) 5.3 & 4L60E 3:42
2000 S-Type 3.0 (wife cruiser)
2003 GMC SCSB 5.3 4L60E 3:42
solidaxel is offline   Reply With Quote
Old 01-31-2019, 10:15 AM   #4
solidaxel
Registered User
 
solidaxel's Avatar
 
Join Date: Dec 2002
Location: Cactus Patch So. Az
Posts: 4,749
Re: New LS Standalone Harness

Drive by CABLE only !
__________________
53 TuTone Extended Cab 350 4-Spd 3:08 (SOLD)
53 Chevy Moldy pearl green ZZ-4 4L60E 9" 3:25
55 GMC 1st Black Mll (ZZ4) ZZ6 TKO 600 5 sp 3:73
62 Solidaxle Corvette Roman Red (327
340hp 4spd 3:36) C4 & C5 suspension tube chassis
LS 3 4L70E
65 Corvette Coupe 327 350hp 4spd 4:11
78 Black Silverado SWB (350/350) 5.3 & 4L60E 3:42
2000 S-Type 3.0 (wife cruiser)
2003 GMC SCSB 5.3 4L60E 3:42
solidaxel is offline   Reply With Quote
Old 01-31-2019, 12:43 PM   #5
BR3W CITY
meowMEOWmeowMEOW
 
BR3W CITY's Avatar
 
Join Date: Sep 2009
Location: MKE WI
Posts: 7,128
Re: New LS Standalone Harness

Its a blue/red harness so its set for the early stuff on 411 pcms. Thats probably why its got the "DBC only" note. Wiring and connector need to be modded to work on the blue/green (late 02+) ECM's but will lack DBW control. If your using a cable setup, then be aware that some of the later GenIII Ecm's lacked IAC control to to DBC.

I may also be missing it, but in the pics it appears there is only a single ISS on the harness, meaning its setup for a 4l60e.

MFG doesn't show wire type either. TXL? GXL? Non rated? You have to be cautious with longevity of cheap wiring. Ask anyone who's bought an imported trailer lol.
__________________
'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING

MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD
BR3W CITY is offline   Reply With Quote
Old 01-31-2019, 01:03 PM   #6
sweetk30
Registered User
 
sweetk30's Avatar
 
Join Date: May 2012
Location: horseheads,ny rust belt
Posts: 2,794
Re: New LS Standalone Harness

look at the other harnesses below . they have DBW stuff .
__________________
77-k30lb BIG truck build .
87-k30lb budget beater build .
85-k30lb the plow machine build .
85-c10sb summer fun toy .
-----------------------------
HOLLEY SNIPER efi = worst case of p.i.t.a i ever had .

EDELBROCK pro flo 4 = best deal going so far . love my setup works great.
sweetk30 is offline   Reply With Quote
Old 01-31-2019, 10:01 PM   #7
Rabid Anti-Dentite
Registered User
 
Join Date: Mar 2016
Location: Fort Worth, TX
Posts: 58
Re: New LS Standalone Harness

I ordered for an LM7 with drive by cable and a 4l60e. My old harness was so brittle that taking the chance on this is worth it to me. Worse case is I have to buy a new year or two.
Rabid Anti-Dentite is offline   Reply With Quote
Old 02-01-2019, 10:47 AM   #8
BR3W CITY
meowMEOWmeowMEOW
 
BR3W CITY's Avatar
 
Join Date: Sep 2009
Location: MKE WI
Posts: 7,128
Re: New LS Standalone Harness

Let us know how it looks when you get it. Its not that we don't want it to work; its that we've chased enough crazy wiring for a lifetime lol.
__________________
'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING

MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD
BR3W CITY is offline   Reply With Quote
Old 02-01-2019, 04:50 PM   #9
Rabid Anti-Dentite
Registered User
 
Join Date: Mar 2016
Location: Fort Worth, TX
Posts: 58
Re: New LS Standalone Harness

Quote:
Originally Posted by BR3W CITY View Post
Let us know how it looks when you get it. Its not that we don't want it to work; its that we've chased enough crazy wiring for a lifetime lol.
Haha will do!
Rabid Anti-Dentite is offline   Reply With Quote
Old 02-18-2019, 09:13 PM   #10
michael bustamante
Senior Member
 
michael bustamante's Avatar
 
Join Date: Sep 2007
Location: Albuquerque NM
Posts: 7,811
Re: New LS Standalone Harness

Any news on this?
__________________
1967custom
michael bustamante is offline   Reply With Quote
Old 02-18-2019, 10:42 PM   #11
Rabid Anti-Dentite
Registered User
 
Join Date: Mar 2016
Location: Fort Worth, TX
Posts: 58
Re: New LS Standalone Harness

It shipped on Saturday from Hong Kong via DHL. So once it arrives I will upload some pics.
Posted via Mobile Device
Rabid Anti-Dentite is offline   Reply With Quote
Old 02-19-2019, 11:58 AM   #12
michael bustamante
Senior Member
 
michael bustamante's Avatar
 
Join Date: Sep 2007
Location: Albuquerque NM
Posts: 7,811
Re: New LS Standalone Harness

sounds good. ill be waiting!
__________________
1967custom
michael bustamante is offline   Reply With Quote
Old 02-19-2019, 12:48 PM   #13
TooTall
Registered User
 
Join Date: Mar 2009
Location: League City,TX
Posts: 66
Re: New LS Standalone Harness

I ordered a DBW harness from them and attempted to get it with the EV6 (08 and up)injector plugs.

It showed up with the wrong plugs, (99-06) and poor solder connections.
They ended up sending me the correct pig tails, but the harness still does not work.

I've started pulling off all of the loom to do some trouble shooting.

You're better off modding an original if you want to be cheap
__________________
1973 K5, full vert, 6" BDS lift, 35 Mickey T MTs
1984 K10, 8" lift on 35s
2004 3/4 4wd, 33s Toyo Mts, Long Tube headers, 3K multidisk 80e, tons of miles
2011 Yukon XL | Bone stock
2013 Audi Q5
TooTall is offline   Reply With Quote
Old 02-19-2019, 03:13 PM   #14
dfarr67
Registered User
 
Join Date: Aug 2011
Location: Yellowknife, NWT
Posts: 39
Re: New LS Standalone Harness

So the guys who received said harness- I have a project in the works- 1989 K1500 with 24X LS conversion set up on SBC that has been waiting. I do have a 1999 truck harness or...pick this harness up. Or does anybody have a lead on a repin service?
dfarr67 is offline   Reply With Quote
Old 02-19-2019, 11:40 PM   #15
RedRider
Registered User
 
RedRider's Avatar
 
Join Date: Jan 2016
Location: Poway, CA
Posts: 356
Re: New LS Standalone Harness

I emailed them with my engine specs, interested to see what they come up with. They say most aftermarket sheet metal comes from only 1-2 places overseas so maybe the same holds true for aftermarket wiring harnesses?
__________________
1970 C-10 "Old Yeller"
RedRider is offline   Reply With Quote
Old 02-20-2019, 05:05 PM   #16
RedRider
Registered User
 
RedRider's Avatar
 
Join Date: Jan 2016
Location: Poway, CA
Posts: 356
Re: New LS Standalone Harness

Quote:
Originally Posted by RedRider View Post
I emailed them with my engine specs, interested to see what they come up with. They say most aftermarket sheet metal comes from only 1-2 places overseas so maybe the same holds true for aftermarket wiring harnesses?
Super fast reply, very knowledgeable and clearly understood my specs (i.e., 24x, DBW, EV6, etc.). Quoted me $180 plus shipping. Too good to be true? Maybe I’ll wait and see what the OP comes up with.
__________________
1970 C-10 "Old Yeller"
RedRider is offline   Reply With Quote
Old 02-21-2019, 04:21 PM   #17
michael bustamante
Senior Member
 
michael bustamante's Avatar
 
Join Date: Sep 2007
Location: Albuquerque NM
Posts: 7,811
Re: New LS Standalone Harness

Quote:
Originally Posted by RedRider View Post
Super fast reply, very knowledgeable and clearly understood my specs (i.e., 24x, DBW, EV6, etc.). Quoted me $180 plus shipping. Too good to be true? Maybe I’ll wait and see what the OP comes up with.
dang. for this price I might try them too. you have a link so I can see what they come up with for me?
__________________
1967custom
michael bustamante is offline   Reply With Quote
Old 02-21-2019, 05:12 PM   #18
RedRider
Registered User
 
RedRider's Avatar
 
Join Date: Jan 2016
Location: Poway, CA
Posts: 356
Re: New LS Standalone Harness

Quote:
Originally Posted by michael bustamante View Post
dang. for this price I might try them too. you have a link so I can see what they come up with for me?
Link is in first post.
__________________
1970 C-10 "Old Yeller"
RedRider is offline   Reply With Quote
Old 02-25-2019, 06:01 PM   #19
Rabid Anti-Dentite
Registered User
 
Join Date: Mar 2016
Location: Fort Worth, TX
Posts: 58
Re: New LS Standalone Harness

So I got the harness in today, and I am happy with it so far. It will be about a month of so before I am ready to test the harness, but here are some pictures.













Rabid Anti-Dentite is offline   Reply With Quote
Old 02-25-2019, 06:02 PM   #20
Rabid Anti-Dentite
Registered User
 
Join Date: Mar 2016
Location: Fort Worth, TX
Posts: 58
Re: New LS Standalone Harness

The instructions are better than what I have gotten in the past when sending my harness out to get modified. I will post some pictures of the instructions here soon.
Rabid Anti-Dentite is offline   Reply With Quote
Old 02-25-2019, 06:19 PM   #21
RedRider
Registered User
 
RedRider's Avatar
 
Join Date: Jan 2016
Location: Poway, CA
Posts: 356
Re: New LS Standalone Harness

Thanks for the update, looks clean. What is your take on connector quality? Keep us posted.
__________________
1970 C-10 "Old Yeller"
RedRider is offline   Reply With Quote
Old 02-25-2019, 06:23 PM   #22
mongocanfly
Post Whore

 
mongocanfly's Avatar
 
Join Date: May 2015
Location: Alabama
Posts: 14,557
Re: New LS Standalone Harness

That pic of your instruction sheet looks alot like the front of the PSI book....
Attached Images
 
__________________
Mongo...aka Greg

RIP Dad
RIP Jesse

1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598
Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334
Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563
2023 Chevy Z71..daily driver
mongocanfly is offline   Reply With Quote
Old 02-25-2019, 07:10 PM   #23
michael bustamante
Senior Member
 
michael bustamante's Avatar
 
Join Date: Sep 2007
Location: Albuquerque NM
Posts: 7,811
Re: New LS Standalone Harness

yeah it does... I sent a request to the link on Friday, lets see if they msg back
__________________
1967custom
michael bustamante is offline   Reply With Quote
Old 02-25-2019, 08:48 PM   #24
Rabid Anti-Dentite
Registered User
 
Join Date: Mar 2016
Location: Fort Worth, TX
Posts: 58
Re: New LS Standalone Harness

Quote:
Originally Posted by mongocanfly View Post
That pic of your instruction sheet looks alot like the front of the PSI book....
Yeah all the add on part numbers start with PSI...I have not looked into that company, but this appears to be where they get their harnesses.
Rabid Anti-Dentite is offline   Reply With Quote
Old 02-25-2019, 09:06 PM   #25
dfarr67
Registered User
 
Join Date: Aug 2011
Location: Yellowknife, NWT
Posts: 39
Re: New LS Standalone Harness

Any way you cab tell if they are using the proper wire type?
dfarr67 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:53 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com