speaker Kick panel....bummer - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68w/sbc406 · 01-29-2005, 08:46 PM

Quote:

Originally Posted by yellow69

I'm not sure why I can't cut a hole and stick this speaker in there.

they also say that speakers pointing directly at each other will sound really bad so you want an angle on them to put the sound out into the cab

franko72 · 01-30-2005, 02:26 PM

I mounted mine under the dash without any boxes or panels .I made brackets with plumbers straps and fastened one above the gas pedal to the firewall and the other behind the ductwork on the passenger side firewall. I have them pointing downward on a 45 degree angle.They sound pretty good. Dont see them at all.

ChevyDude · 01-30-2005, 02:31 PM

For the record...I had to put this project on hold, due to work issues and lack of time. I have my complete system sitting in boxes and I will aventually get to making the speaker panels...sorry for the delay guys.

5150 · 02-24-2006, 07:57 PM

I'm opening this thread back up because I've FINALLY decided to do these. But I'm going to go with 6x9's. Since so many guys responded to this thread I was wondering if anybody actually did these and if anybody did 6x9's

muddpile · 02-25-2006, 01:45 AM

I've got a nice set of eclipse 6x9's that I planned on putting in the doors, but I'm going to measure and see if its worth building kicks. The E-brake, vents and dimmer are all potential problems. The dimmer is no big deal, just a couple screws (getting new carpet anyways) but the floor vent and E-brake are a problem.

5150 · 02-25-2006, 01:52 AM

I got some Roddoors for Christmas and I'm about to install them. I'd really had to cut into them. They look so pretty.

76bonanza · 02-25-2006, 01:36 PM

So what is the total depth you have with the vendor kickpanels? And will any component set fit them?

01-30-2005, 02:26 PM	#152
franko72 Franko72 Join Date: May 2004 Location: Cincinnati,Ohio Posts: 471	I mounted mine under the dash without any boxes or panels .I made brackets with plumbers straps and fastened one above the gas pedal to the firewall and the other behind the ductwork on the passenger side firewall. I have them pointing downward on a 45 degree angle.They sound pretty good. Dont see them at all. __________________ 1972 C20 cheyenne Super 402 BB/400 turbo LWB A/C Tilt, Cruise Control, Saddle tanks, Tach My Home Page Better to burn out than it is to rust

01-30-2005, 02:31 PM	#153
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	For the record...I had to put this project on hold, due to work issues and lack of time. I have my complete system sitting in boxes and I will aventually get to making the speaker panels...sorry for the delay guys. __________________ Alex 1971 Lil' Red 350 SBC 700R4

02-24-2006, 07:57 PM	#154
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,279	Re: speaker Kick panel....bummer I'm opening this thread back up because I've FINALLY decided to do these. But I'm going to go with 6x9's. Since so many guys responded to this thread I was wondering if anybody actually did these and if anybody did 6x9's __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

02-25-2006, 01:45 AM	#155
muddpile Registered User Join Date: Dec 2004 Location: Saskatchewan, Canada Posts: 1,371	Re: speaker Kick panel....bummer I've got a nice set of eclipse 6x9's that I planned on putting in the doors, but I'm going to measure and see if its worth building kicks. The E-brake, vents and dimmer are all potential problems. The dimmer is no big deal, just a couple screws (getting new carpet anyways) but the floor vent and E-brake are a problem. __________________ 1964 Chevy Short Fleet: Tornado 1972 Chevy C10: Fast Orange Secondaries Wide Open

02-25-2006, 01:52 AM	#156
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,279	Re: speaker Kick panel....bummer I got some Roddoors for Christmas and I'm about to install them. I'd really had to cut into them. They look so pretty. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

02-25-2006, 01:36 PM	#157
76bonanza Senior Member Join Date: Mar 2003 Location: St robert Mo Posts: 2,001	Re: speaker Kick panel....bummer So what is the total depth you have with the vendor kickpanels? And will any component set fit them? __________________ 1968 c10 lowered 3" 4" 355/Th400 built by Hatfield racing in joplin MO



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.