'60-'66 Suburban/Panel gas filler assembly - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Captainfab** · 03-11-2009, 12:22 AM

Here is the perfect way to add a filler door to the side of you box for your rear mounted gas tank. This is an original gas filler door and fill tube assemnly from a Suburban/ Panel. The filler door section has been abrasive blasted and primed with 2 coats of quality epoxy primer. The fill tube has also been abrasive blasted and powder coated satin black.

I would like to get $95.00 for this setup, plus shipping. This may seem a little high, but when you consider the work that has went into this so far, it isn't that bad.

**Captainfab** · 03-11-2009, 12:24 AM

More pics.....

joe231 · 03-11-2009, 02:14 PM

do you have a suburban tank? or pics of one?

**Captainfab** · 03-11-2009, 11:23 PM

I don't have an extra tank, however I do have the one under my '66 Suburban that I can take a pic of. Is there something specific you are interested in?

joe231 · 03-12-2009, 07:50 AM

i was wondering about how low it hung, how it attaches to the frame, the routing of the filler, and will it fit a truck frame?

**Captainfab** · 03-12-2009, 11:10 PM

The Suburban/Panel gas tank is essentially the same as the '69-'72 Blazer tank. The biggest difference is that the Suburban/Panel tank has a good sized haif-round notch out of it to accomodate the spare tire. I'm not positive, but I think it may be slightly shallower also. The filler is the same as far as I know, and it would fit a pickup frame just like the Blazer tank. I can get you some pics and measurements on Saturday.

padresag · 03-13-2009, 05:46 PM

Quote:

Originally Posted by joe231

i was wondering about how low it hung, how it attaches to the frame, the routing of the filler, and will it fit a truck frame?

I do have a couple out of the trruck if you want a picture of one
ron

joe231 · 03-13-2009, 05:49 PM

Thanks John.....

Ron,
That would be great!!

padresag · 03-13-2009, 06:15 PM

send a pm with your email address and I will send them to you later today
ron

joe231 · 03-15-2009, 04:27 PM

John
I'm interested in these....
got another question..................
do you think this would interfere with the factory body side trim on our '66? would the factory trim need to be modified?
did the panels have trim like the trucks?
i'm not sure of the position of the door in relation to the trim.

**Captainfab** · 03-15-2009, 10:59 PM

Joe

Unfortunately the filler door is right where the Custom Cab trim is on the pickups. I've looked at this myself, and figured I could just cut the trim and carefully finish the ends just like the factory did.

joe231 · 03-15-2009, 11:50 PM

so you would have a short piece on the filler door?

**Captainfab** · 03-16-2009, 12:45 AM

Quote:

Originally Posted by joe231

so you would have a short piece on the filler door?

Yes....or maybe both....I don't remember. I'll have to measure it tomorrow.

**Captainfab** · 03-18-2009, 01:19 AM

I did some measuring today Joe. I'm not sure how this would work with the CC trim. Both pieces will be on the door, and the upper one will be aprox centered on the gap at the top.

joe231 · 03-18-2009, 09:18 AM

that sucks.

**Captainfab** · 04-03-2009, 11:42 PM

Ttt

**Captainfab** · 04-15-2009, 12:23 PM

Bump.....

Apache63 · 04-27-2009, 04:39 PM

Quote:

Originally Posted by Captainfab

Bump.....

is it still for sale??

i´ll take it !!!

**Captainfab** · 04-27-2009, 11:10 PM

Quote:

Originally Posted by Apache63

is it still for sale??

i´ll take it !!!

Yes I still have it. I'll send you a PM to arrange payment and shipping.

duallyjams · 04-30-2009, 07:59 AM

I just went to a show and seen a long bed with this set up and now I just seen this sale add to realize I snoozed for the second time today on a good deal.

**Captainfab** · 05-02-2009, 04:59 PM

SOLD To Apache63

Thanks Pat

03-11-2009, 12:22 AM	#1
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	'60-'66 Suburban/Panel gas filler assembly Here is the perfect way to add a filler door to the side of you box for your rear mounted gas tank. This is an original gas filler door and fill tube assemnly from a Suburban/ Panel. The filler door section has been abrasive blasted and primed with 2 coats of quality epoxy primer. The fill tube has also been abrasive blasted and powder coated satin black. I would like to get $95.00 for this setup, plus shipping. This may seem a little high, but when you consider the work that has went into this so far, it isn't that bad. Attached Images __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

03-11-2009, 12:24 AM	#2
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: '60-'66 Suburban/Panel gas filler assembly More pics..... Attached Images __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

03-11-2009, 02:14 PM	#3
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: '60-'66 Suburban/Panel gas filler assembly do you have a suburban tank? or pics of one? __________________ *CHEVY ONLY*

03-11-2009, 11:23 PM	#4
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: '60-'66 Suburban/Panel gas filler assembly I don't have an extra tank, however I do have the one under my '66 Suburban that I can take a pic of. Is there something specific you are interested in? __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

03-12-2009, 07:50 AM	#5
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: '60-'66 Suburban/Panel gas filler assembly i was wondering about how low it hung, how it attaches to the frame, the routing of the filler, and will it fit a truck frame? __________________ *CHEVY ONLY*

03-12-2009, 11:10 PM	#6
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: '60-'66 Suburban/Panel gas filler assembly The Suburban/Panel gas tank is essentially the same as the '69-'72 Blazer tank. The biggest difference is that the Suburban/Panel tank has a good sized haif-round notch out of it to accomodate the spare tire. I'm not positive, but I think it may be slightly shallower also. The filler is the same as far as I know, and it would fit a pickup frame just like the Blazer tank. I can get you some pics and measurements on Saturday. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE Last edited by Captainfab; 03-12-2009 at 11:12 PM.

03-13-2009, 05:49 PM	#8
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: '60-'66 Suburban/Panel gas filler assembly Thanks John..... Ron, That would be great!! __________________ *CHEVY ONLY*

03-13-2009, 06:15 PM	#9
padresag Registered User Join Date: Feb 2008 Location: Sidney,b.c. Posts: 4,425	Re: '60-'66 Suburban/Panel gas filler assembly send a pm with your email address and I will send them to you later today ron

03-15-2009, 04:27 PM	#10
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: '60-'66 Suburban/Panel gas filler assembly John I'm interested in these.... got another question.................. do you think this would interfere with the factory body side trim on our '66? would the factory trim need to be modified? did the panels have trim like the trucks? i'm not sure of the position of the door in relation to the trim. __________________ *CHEVY ONLY*

03-15-2009, 10:59 PM	#11
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: '60-'66 Suburban/Panel gas filler assembly Joe Unfortunately the filler door is right where the Custom Cab trim is on the pickups. I've looked at this myself, and figured I could just cut the trim and carefully finish the ends just like the factory did. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

03-15-2009, 11:50 PM	#12
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: '60-'66 Suburban/Panel gas filler assembly so you would have a short piece on the filler door? __________________ *CHEVY ONLY*

03-18-2009, 01:19 AM	#14
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: '60-'66 Suburban/Panel gas filler assembly I did some measuring today Joe. I'm not sure how this would work with the CC trim. Both pieces will be on the door, and the upper one will be aprox centered on the gap at the top. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

03-18-2009, 09:18 AM	#15
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: '60-'66 Suburban/Panel gas filler assembly that sucks. __________________ *CHEVY ONLY*

04-03-2009, 11:42 PM	#16
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: '60-'66 Suburban/Panel gas filler assembly Ttt __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE Last edited by Captainfab; 04-03-2009 at 11:43 PM.

04-15-2009, 12:23 PM	#17
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: '60-'66 Suburban/Panel gas filler assembly Bump..... __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE



Register or Log In To remove these advertisements.

04-30-2009, 07:59 AM	#20
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: '60-'66 Suburban/Panel gas filler assembly I just went to a show and seen a long bed with this set up and now I just seen this sale add to realize I snoozed for the second time today on a good deal. __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

05-02-2009, 04:59 PM	#21
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: '60-'66 Suburban/Panel gas filler assembly SOLD To Apache63 Thanks Pat __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE Last edited by Captainfab; 05-02-2009 at 04:59 PM.

Register or Log In To remove these advertisements.