47-59 S10 master cylinder - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**8man** · 06-27-2020, 02:19 PM

I am using a stock S10 brake assembly under the dash. I have a 94 Chevy Astro Van hyro unit for the power mechanism. I put one on the Cherokee I did and it works great. Lots of stopping power.

The problem is that I need the push rod from a stock S10 master cylinder, the one that connects to the brake pedal. The Astro unit push rod has a larger connector hole and rattles around on the pin on the brake pedal.

So if anyone has an extra unit that isn't good anymore and would be willing to cut the push rod off, please PM me.

Thanks

06-27-2020, 02:19 PM	#1
8man Senior Member Join Date: Sep 2017 Location: Bryan, Texas Posts: 2,277	S10 master cylinder I am using a stock S10 brake assembly under the dash. I have a 94 Chevy Astro Van hyro unit for the power mechanism. I put one on the Cherokee I did and it works great. Lots of stopping power. The problem is that I need the push rod from a stock S10 master cylinder, the one that connects to the brake pedal. The Astro unit push rod has a larger connector hole and rattles around on the pin on the brake pedal. So if anyone has an extra unit that isn't good anymore and would be willing to cut the push rod off, please PM me. Thanks __________________ 8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.