CA 72' Jimmy/Blazer Frame Horns

So one of my PO had cut off the frame horns on my 72' Jimmy so that he could install his precious step bumper. I would like to put the stock bumper back on and need the a small section of each side of the rear frame that includes the horns. Will pay good $$. Thanks in advance. Martin

[Radiatta_71]

Originally Posted by Martyt

So one of my PO had cut off the frame horns on my 72' Jimmy so that he could install his precious step bumper. I would like to put the stock bumper back on and need the a small section of each side of the rear frame that includes the horns. Will pay good $$. Thanks in advance. Martin

I need frame horns too. What I did for a work around for now is to use pickup brackets and modify them. I had to cut off the ends by the fuel tank and make some clearance for the body mount bushing.

[richard2717]

Let me check later today to see if the suburban rear horns are the same as the 72 blazer/Jimmy. If they are I should have several sets and will post them up. How far back do you need?

Originally Posted by richard2717

Let me check later today to see if the suburban rear horns are the same as the 72 blazer/Jimmy. If they are I should have several sets and will post them up. How far back do you need?

I would want 1 foot to be on the safe side but will double check once my Jimmy is back from the alignment and muffler shop. I will do research to see if they are the same as well. If anyone on the Forum knows, please feel free to chime in. Thanks. Martin

[richard2717]

I have both here so I will be able to tell once I can get to them this afternoon. The blazer ones are not for sale it is a full frame I will be using but can use for verification purposes

Sounds great!!! Will wait to hear from you!

[richard2717]

Well checked them out and Blazer is different from the burbs. Blazer has a deep kick down near the end where as the burb is pretty much straight . ist pic is the burb one and 2nd is the blazer. Sorry could not help


.

Okay, thanks for looking!

If anyone on Forum can help me, let me know— I will pay a very good price for correct frame horns. Thanks in advance! Martin

[DeadheadNM]

Just so odd to me that GM would alter so many things including K5 rear frame horns specifically for the 72 model year when the body style was slated to change.

Odd to me as well Pete— especially given the debut of the successor square body which I think was supposed to debut in 72

Bump with some incentive. Will pay $100 plus shipping--not sure if that is a fair price or not but will adjust price upward accordingly from time to time if it is not. Thanks. Martin

Bumping the price to $125 (plus shipping) to further incentivize anyone who has this part. Thanks in advance. Martin

[MikeCofield]

I have a 72 frame I’m going sell cuts off of

[YBNORML]

I also have a set. I’d have to look for them. Let me know.

Sounds good guys--let me know and please post pictures. Thanks in advance. Martin

[6t727t2]

Too bad your not on the opposite coast, I have this '72 Jimmy rolling frame, but it's too nice to cut up, has title and vin also.

Luckily, my frame is good. BUMP for the surprisingly unobtanium 72' frame horns.

[72blzrWA]

Did you check with 1Rippen6? He's always cutting up donors.

Will do! Thx

[YBNORML]

Originally Posted by Martyt

Luckily, my frame is good. BUMP for the surprisingly unobtanium 72' frame horns.

I haven’t forgot about you. It’s been a wicked busy week. I’ll post as soon as I find them.

[72blazernut]

I too am looking for rear frame horns for my 1972 blazer. PO cut them off for a roll pan and I want to go back to a stock bumper.

Thanks Jason! Much appreciated!

[YBNORML]

Here’s what I got. They are about 10-1/2”.

As you can see the hole for the trailer hitch “i think” is emerged by rust on the one. Other than that they are solid.

[72blazernut]

I'll take them. PM sent.