1/8 mile track times? best 60 foot? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

FirstGen · 12-14-2004, 06:46 PM

Just couriuos how many of you guys are going to the track with your truck? I see alot more of the cruizer/custom show trucks on here. What's the best 1/8 or 1/4 ET and MPH? 60'?
What is your race weight and CID, tranny?
Lets hear it.

I'm running 7.7X's at 86 mph on the motor and 7.0X at 96 on the juice in the 1/8. With a best 60' of 1.94 (needs gears BAD).

383 Stroker · 12-14-2004, 07:25 PM

My best 1/8 mile is 7.64@89mph with 150hp shot, best 60ft 1.72

383ci, TH350 w/2800 stall, 3.73 gear. It weigh's about 3900lbs with me in it.

browndawg71 · 12-14-2004, 07:28 PM

7.7s motor , 6.8s on the squeeze. 3800 lb truck w/out me in it. 468 bb, ported oval ports , solid cam , vic jr , 1000 cfm holley , 373 gears, 3500 stall,and last but not least 200 shot. on pump gas .

LUV2XCLR8 · 12-14-2004, 07:29 PM

Quote:

Originally Posted by 383 Stroker

My best 1/8 mile is 7.64@89mph with 150hp shot, best 60ft 1.72

383ci, TH350 w/2800 stall, 3.73 gear. It weigh's about 3900lbs with me in it.

WOW, MUST BE THE N20

9.53 1/8 AND 2.02 60FT - STOCK 400 SB, POWERGLIDE, 3:73 WELDED SPIDERS, 3650 ME IN IT.

383 Stroker · 12-14-2004, 07:57 PM

Quote:

Originally Posted by LUV2XCLR8

WOW, MUST BE THE N20

9.53 1/8 AND 2.02 60FT - STOCK 400 SB, POWERGLIDE, 3:73 WELDED SPIDERS, 3650 ME IN IT.

It run's 8.60's @80mph without nitrous.

FirstGen · 12-14-2004, 08:30 PM

383 Stroker - What size slicks/tires are you running?

bigjimzlll · 12-14-2004, 08:58 PM

6.97 @ 98mph with a 1.51 60 foot time 10.96 @ 121mph 1/4 thats a 406 weighing 3900 with driver and a 150 shot

383 Stroker · 12-14-2004, 09:10 PM

Quote:

Originally Posted by FirstGen

383 Stroker - What size slicks/tires are you running?

28x9" Hoosier. Got them free, will go with ET Street next time. Probably 28x13.50"

kamkam1 · 12-15-2004, 12:15 AM

8.52 @ 82 mph and 1.83 60', all throttle no bottle.

GMan69 · 12-15-2004, 12:40 AM

ALRIGHT JIM!!! You got it into the TENS. Awesome!

djracer · 12-15-2004, 01:01 AM

Best 1/4 ET @ mph: 13.554@97.01
Best 1/8 ET @ mph: 8.567@80.29
Best 60 ft: 1.898 on MT Sportsmans
Engine: 350 (zz4 clone)
Transmission: Turbo 350

71 SWB FLEET
28.5 x 12.5 Mt Sportsman pro's

FirstGen · 12-15-2004, 04:14 AM

Bigjimz - what tire, gears, tranny are you running? I'm hoping to break into the 6's after a gear swap, my mile per hour is there just not the 60'...

bigjimzlll · 12-15-2004, 09:25 AM

the tires are 28x13.5-15 Mickey thompson ET Streets. 4.56 gears and a th350 with 4700 stall. Im putting a th400 with a trans brake in this winter. Im also going to a one piece drive shaft(with a LWB its not easy) I moved the engine back to the 6 cylinder location and im using a th400 long tail tranny and the shaft will still be around 63 inches long.

browndawg71 · 12-15-2004, 01:20 PM

some fast ass hay haulers on here!

FirstGen · 12-15-2004, 01:40 PM

I had a one piece aluminum made a while back when I was still a LWB and it was 66" !!!
Course I grenaded that recently even though it was .125" tubing 3.5"...

Project1970 · 12-15-2004, 02:07 PM

With the old engine/tranny I was running 10's...in the eigth

2.2-2.3 60' times, of course I have an open 3.73 and regular radials. 15.7 quarters at 86MPH, but that was with an engine with a pretty choked up exhaust (behind the headers, that is) and a transmission that wouldn't shift 1-2 higher than 4200RPM.

With the LS1 (which is going in more or less stock, just with a much freer-flowing intake and exhaust than the F-Body it came out of) I hope to hit low 14's and 98+MPH in the quarter.

Purs · 12-15-2004, 02:50 PM

first gen, quick truck! Cool videos at your site. Looks like you've been beatin' on that thing!

FirstGen · 12-15-2004, 04:37 PM

I build it to drive it, and I drive it like I stole it!

gmc67swb · 12-15-2004, 06:58 PM

I'll have times soon. I plan on going to the Creek to race my cousin and a couple of buddies. My cousin has a new HEMI pick up. I'm gonna kick his a$$!!! He doesn't know it yet, but I gotta bottle to go with my 350HO waitn' for him. Oh, and can't forget the drag radials Heh Heh Heh

383 Stroker · 12-15-2004, 07:23 PM

Quote:

Originally Posted by Purs

first gen, quick truck! Cool videos at your site. Looks like you've been beatin' on that thing!

I want to see the video's, but can't find the link. What did I miss?

Purs · 12-15-2004, 07:43 PM

sorry 383, those were your videos, not FirstGen's....

383 Stroker · 12-15-2004, 09:49 PM

Quote:

Originally Posted by Purs

sorry 383, those were you're videos, not FirstGen's....

Oh, ok. I need to upload somemore video's. I have over 80 video's of me running at the track.

fast_dev · 12-15-2004, 10:50 PM

best 60' is 1.7, usually get 1.8's eigth mile is 7.8 @90 mph, best 1/4 mile is 12.2 @111mph. 406 small block, muncie 4 speed, 4.88 gears. ALL MOTOR.

djracer · 12-15-2004, 11:04 PM

fast dev what kind of shifter do you have? My uncle's 66 gmc has a muncie and its 2 miles from 1st to 2nd!

Thanks
Kevin

fast_dev · 12-17-2004, 12:25 AM

hurst v-gate, short throw, inline shifter. less chance of missin' gears and bouncing off the rev limiter. Dev.

12-14-2004, 06:46 PM	#1
FirstGen Just Don't Stop! Join Date: Feb 2004 Location: Dallas Posts: 1,239	1/8 mile track times? best 60 foot? Just couriuos how many of you guys are going to the track with your truck? I see alot more of the cruizer/custom show trucks on here. What's the best 1/8 or 1/4 ET and MPH? 60'? What is your race weight and CID, tranny? Lets hear it. I'm running 7.7X's at 86 mph on the motor and 7.0X at 96 on the juice in the 1/8. With a best 60' of 1.94 (needs gears BAD). __________________ 1968 C10 build in process TT LSA/6L90e/9"

12-14-2004, 07:25 PM	#2
383 Stroker Registered User Join Date: Aug 2001 Location: Jesup, GA Posts: 571	My best 1/8 mile is 7.64@89mph with 150hp shot, best 60ft 1.72 383ci, TH350 w/2800 stall, 3.73 gear. It weigh's about 3900lbs with me in it. __________________ Video's of my Truck Racing 1967 C-10, 383ci Sbc, TH350, 3200 stall, 3.73 gear

12-14-2004, 07:28 PM	#3
browndawg71 Registered User Join Date: Jun 2004 Location: paris, texas Posts: 235	7.7s motor , 6.8s on the squeeze. 3800 lb truck w/out me in it. 468 bb, ported oval ports , solid cam , vic jr , 1000 cfm holley , 373 gears, 3500 stall,and last but not least 200 shot. on pump gas . __________________ every man must believe in something, i believe ill have another beer!

12-14-2004, 08:30 PM	#6
FirstGen Just Don't Stop! Join Date: Feb 2004 Location: Dallas Posts: 1,239	383 Stroker - What size slicks/tires are you running? __________________ 1968 C10 build in process TT LSA/6L90e/9"

12-14-2004, 08:58 PM	#7
bigjimzlll Senior Member Join Date: Dec 2001 Location: Redding,CA...USA Posts: 4,736	6.97 @ 98mph with a 1.51 60 foot time 10.96 @ 121mph 1/4 thats a 406 weighing 3900 with driver and a 150 shot __________________ It's called "drag racing" if they called it "tic..tic..WHAM!..BANG! F*&K!!!", they'd have to keep the magazines under the counter with the other men's publications click the clicky to join the site.... http://67-72chevytrucks.com/vboard/payments.php 67 lwb..first hotrod in 25 years..540 best ET is 9.45 @ 141.44 Anderson,CA

12-15-2004, 12:15 AM	#9
kamkam1 Registered User Join Date: Aug 2003 Location: southeast missouri Posts: 74	1/8 mile and 60' ET 8.52 @ 82 mph and 1.83 60', all throttle no bottle. __________________ Kirk Myers 68 chevy swb owned since 87, under the knife 71 skylark 9.20's @ 76mph 1/8 mile

12-15-2004, 12:40 AM	#10
GMan69 Registered User Join Date: Mar 2001 Location: Hernando, MS USA Posts: 1,152	ALRIGHT JIM!!! You got it into the TENS. Awesome! __________________ George Morgan Hernando, MS '69 C-10 swb fleetside '72 GMC swb Stepside

12-15-2004, 01:01 AM	#11
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Best 1/4 ET @ mph: 13.554@97.01 Best 1/8 ET @ mph: 8.567@80.29 Best 60 ft: 1.898 on MT Sportsmans Engine: 350 (zz4 clone) Transmission: Turbo 350 71 SWB FLEET 28.5 x 12.5 Mt Sportsman pro's __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

12-15-2004, 04:14 AM	#12
FirstGen Just Don't Stop! Join Date: Feb 2004 Location: Dallas Posts: 1,239	Bigjimz - what tire, gears, tranny are you running? I'm hoping to break into the 6's after a gear swap, my mile per hour is there just not the 60'... __________________ 1968 C10 build in process TT LSA/6L90e/9"

12-15-2004, 09:25 AM	#13
bigjimzlll Senior Member Join Date: Dec 2001 Location: Redding,CA...USA Posts: 4,736	the tires are 28x13.5-15 Mickey thompson ET Streets. 4.56 gears and a th350 with 4700 stall. Im putting a th400 with a trans brake in this winter. Im also going to a one piece drive shaft(with a LWB its not easy) I moved the engine back to the 6 cylinder location and im using a th400 long tail tranny and the shaft will still be around 63 inches long. __________________ It's called "drag racing" if they called it "tic..tic..WHAM!..BANG! F*&K!!!", they'd have to keep the magazines under the counter with the other men's publications click the clicky to join the site.... http://67-72chevytrucks.com/vboard/payments.php 67 lwb..first hotrod in 25 years..540 best ET is 9.45 @ 141.44 Anderson,CA

12-15-2004, 01:20 PM	#14
browndawg71 Registered User Join Date: Jun 2004 Location: paris, texas Posts: 235	some fast ass hay haulers on here! __________________ every man must believe in something, i believe ill have another beer!

12-15-2004, 01:40 PM	#15
FirstGen Just Don't Stop! Join Date: Feb 2004 Location: Dallas Posts: 1,239	I had a one piece aluminum made a while back when I was still a LWB and it was 66" !!! Course I grenaded that recently even though it was .125" tubing 3.5"... __________________ 1968 C10 build in process TT LSA/6L90e/9"

12-15-2004, 02:07 PM	#16
Project1970 14.1 @ 96MPH Join Date: Jul 2001 Location: Mesa, AZ Posts: 2,811	With the old engine/tranny I was running 10's...in the eigth 2.2-2.3 60' times, of course I have an open 3.73 and regular radials. 15.7 quarters at 86MPH, but that was with an engine with a pretty choked up exhaust (behind the headers, that is) and a transmission that wouldn't shift 1-2 higher than 4200RPM. With the LS1 (which is going in more or less stock, just with a much freer-flowing intake and exhaust than the F-Body it came out of) I hope to hit low 14's and 98+MPH in the quarter. __________________ Project1970 - LS1 Swap Complete!

12-15-2004, 02:50 PM	#17
Purs Got Big Block? Join Date: Apr 2000 Location: West Texas Posts: 1,510	first gen, quick truck! Cool videos at your site. Looks like you've been beatin' on that thing! __________________ "Experience is what you get when you didn't get what you wanted."

12-15-2004, 04:37 PM	#18
FirstGen Just Don't Stop! Join Date: Feb 2004 Location: Dallas Posts: 1,239	I build it to drive it, and I drive it like I stole it! __________________ 1968 C10 build in process TT LSA/6L90e/9"



Register or Log In To remove these advertisements.

12-15-2004, 06:58 PM	#19
gmc67swb Registered User Join Date: Feb 2003 Location: Mesquite, Tx Posts: 396	I'll have times soon. I plan on going to the Creek to race my cousin and a couple of buddies. My cousin has a new HEMI pick up. I'm gonna kick his a$$!!! He doesn't know it yet, but I gotta bottle to go with my 350HO waitn' for him. Oh, and can't forget the drag radials Heh Heh Heh __________________ GM 330HP/350, Magnuson 122HH, Tremec TKO 5spd

12-15-2004, 07:43 PM	#21
Purs Got Big Block? Join Date: Apr 2000 Location: West Texas Posts: 1,510	sorry 383, those were your videos, not FirstGen's.... __________________ "Experience is what you get when you didn't get what you wanted." Last edited by Purs; 12-15-2004 at 09:58 PM.

12-15-2004, 10:50 PM	#23
fast_dev Registered User Join Date: Dec 2000 Location: Ringtown,PA Posts: 555	best 60' is 1.7, usually get 1.8's eigth mile is 7.8 @90 mph, best 1/4 mile is 12.2 @111mph. 406 small block, muncie 4 speed, 4.88 gears. ALL MOTOR. __________________ 68 chevy 406 small block, budget drag racer, new best e.t 11.91 @112 67 nova numbers matching 327 4 speed 13.6 @ 102mph 70 longhorn c-30 402/4 speed 70 c-10 swb 402, muncie 4 speed 94 s-10 350/th350 3:73 posi 71 c-20 402/th400 towrig for racetruck. 72 4wd lifted on 35's 72 350/3 speed winter beater

12-15-2004, 11:04 PM	#24
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	fast dev what kind of shifter do you have? My uncle's 66 gmc has a muncie and its 2 miles from 1st to 2nd! Thanks Kevin __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

12-17-2004, 12:25 AM	#25
fast_dev Registered User Join Date: Dec 2000 Location: Ringtown,PA Posts: 555	hurst v-gate, short throw, inline shifter. less chance of missin' gears and bouncing off the rev limiter. Dev. __________________ 68 chevy 406 small block, budget drag racer, new best e.t 11.91 @112 67 nova numbers matching 327 4 speed 13.6 @ 102mph 70 longhorn c-30 402/4 speed 70 c-10 swb 402, muncie 4 speed 94 s-10 350/th350 3:73 posi 71 c-20 402/th400 towrig for racetruck. 72 4wd lifted on 35's 72 350/3 speed winter beater

Register or Log In To remove these advertisements.